Dexter 5-inch 800W Angle Grinder

1. Johdanto

Thank you for choosing the Dexter 800AG2-125.5AB1 Angle Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

This angle grinder is designed for cutting and grinding metal and various coatings. Its 800W motor delivers 11,500 RPM, accommodating 4.1/2" / 5" (115/125mm) discs. The tool features a 3-meter power cord for extended reach and an ergonomic grip for comfortable handling.

2. Turvallisuusohjeet

Noudata aina perusturvallisuusohjeita tulipalon, sähköiskun ja henkilövahinkojen vähentämiseksi sähkötyökaluja käyttäessäsi.

• Käytä asianmukaisia ​​henkilönsuojaimia: Always wear safety glasses, hearing protection, and gloves. A dust mask is recommended for dusty operations.
• Kiinnitä työkappale: Always clamp tai kiinnitä työkappale niin, ettei se liiku käytön aikana.
• Maintain a clean work area: Cluttered areas invite accidents. Ensure your workspace is well-lit.
• Vältä vaarallisia ympäristöjä: Do not use power tools in damp or wet locations, or expose them to rain. Keep the work area well-ventilated.
• Pidä lapset ja sivulliset loitolla: All visitors should be kept a safe distance from the work area.
• Säilytä käyttämättömiä työkaluja: When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.
• Älä pakota työkalua: It will do the job better and more safely at the rate for which it was designed.
• Käytä oikeaa työkalua: Do not force a small tool or attachment to do the job of a heavy-duty tool.
• Tarkista vaurioituneet osat: Before using the tool, check for any damaged parts. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center.
• Katkaise virta: Always disconnect the tool from the power source before making any adjustments, changing accessories, or storing the tool.
• Käytä apukahvaa: Always operate the angle grinder with the auxiliary handle securely attached for maximum control.

3. Tuote ohiview

Familiarize yourself with the components of your Dexter Angle Grinder.

Kuva 1: Kaiken kaikkiaan view of the Dexter Angle Grinder, highlighting its powerful motor suitable for heavy-duty tasks.

Kuva 2: Detail of the power switch, indicating the tool's robust power for demanding work.

Kuva 3: View of the disc mounting area, designed for simple and quick disc changes.

Kuva 4: Close-up of the spindle lock button, essential for secure disc changes.

Kuva 5: The ergonomic handle design, ensuring light and comfortable use.

Mukana tulevat komponentit:

• 1 x Dexter 5" Angle Grinder
• 1 x jakoavain
• 1 x apukahva
• 1 x Disc Guard 115mm
• 1 x Disc Guard 125mm

4. Asennus

4.1 Attaching the Disc Guard

1. Varmista, että jauhin on irrotettu virtalähteestä.
2. Select the appropriate disc guard (115mm or 125mm) for your chosen disc size.
3. Position the disc guard over the spindle housing, ensuring it aligns with the mounting points.
4. Secure the guard firmly using the provided screws or clamping mechanism. Ensure it is oriented to provide maximum protection during operation.

4.2 Apukahvan asentaminen

The auxiliary handle can be attached in three different positions (left, right, or top) to suit your working preference and ensure optimal control.

Kuva 6: Angle grinder with auxiliary handle attached, providing enhanced control and precision.

1. Identify the threaded holes on the grinder's gear housing.
2. Screw the auxiliary handle clockwise into the desired position until it is securely tightened.

4.3 Mounting a Grinding/Cutting Disc

1. Varmista, että jauhin on irrotettu pistorasiasta.
2. Press and hold the spindle lock button (Figure 4) to prevent the spindle from rotating.
3. Aseta sisälaippa karalle.
4. Aseta hioma- tai katkaisulaikka sisälaipalle varmistaen, että se on tasaisesti.
5. Screw the outer flange onto the spindle, hand-tightening it.
6. Use the provided wrench to firmly tighten the outer flange, ensuring the disc is securely mounted. Release the spindle lock button.

5. Käyttöohjeet

5.1 Virran kytkeminen päälle/pois

1. To turn on the grinder, slide the power switch (Figure 2) forward.
2. To turn off the grinder, slide the power switch backward to the 'OFF' position.

5.2 Hionta- ja leikkaustekniikat

Pidä hiomakonetta aina tukevasti molemmilla käsillä käyttäen sekä pääkahvaa että apukahvaa.

Kuva 7: Angle grinder in use, demonstrating its effectiveness for cutting metal profiles and coatings.

Kuva 8: Angle grinder being used for sanding a wooden surface, showcasing sen monipuolisuutta.

• For Grinding: Pidä hiomakonetta noin 15–30 asteen kulmassa työkappaleeseen nähden. Paina kohtalaisesti ja liikuta työkalua tasaisesti pinnan yli.
• For Cutting: Hold the grinder perpendicular to the workpiece. Allow the disc to cut through the material without forcing it. Ensure the workpiece is stable and supported.
• Vältä ylikuormitusta: Do not apply excessive pressure, as this can reduce disc life and motor efficiency.
• Allow the tool to reach full speed: Before making contact with the workpiece, allow the disc to reach its full operating speed.

6. Huolto

Säännöllinen huolto varmistaa kulmahiomakoneesi pitkän käyttöiän ja turvallisen toiminnan.

• Puhdistus: Puhdista tuuletusaukot säännöllisesti estääksesi pölyn kertymisen, joka voi aiheuttaa ylikuumenemista. Käytä pehmeää harjaa tai paineilmaa.
• Hiiliharjat: This tool uses a brushed motor. Carbon brushes are wear parts and should be checked periodically. If they are worn down, they must be replaced by qualified personnel.
• Virtajohto: Inspect the power cord for any damage before each use. Do not use the tool if the cord is damaged.
• Levyn vaihto: Replace worn or damaged discs immediately. Always use discs rated for the grinder's speed and application.
• Varastointi: Säilytä työkalua kuivassa, turvallisessa paikassa, lasten ulottumattomissa.

7. Vianmääritys

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your local Dexter authorized service center. Keep your purchase receipt as proof of purchase.