Heltec HT-SW01H+2040M25 Capacitor Storage Battery Spot Welding Machine User Manual

1. Johdanto

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Heltec HT-SW01H+2040M25 Capacitor Storage Battery Spot Welding Machine. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury.

Figure 1: Heltec HT-SW01H+2040M25 Spot Welding Machine

2. Turvallisuustiedot

WARNING: Improper use of this spot welding machine can result in serious injury or damage to the equipment. Always follow safety guidelines.

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the machine.
• Varmista, että työskentelyalue on hyvin tuuletettu ja ettei siinä ole syttyviä materiaaleja.
• Do not operate the machine in wet conditions or with wet hands.
• Pidä lapset ja luvaton henkilökunta poissa käyttöalueelta.
• Katkaise virta ennen huolto- tai säätötoimenpiteitä.
• The machine operates on a low voltage supply system with CE certification, designed for high safety. It is not prone to overheating, flammability, or explosion under normal operating conditions.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• Heltec HT-SW01H+2040M25 Spot Welding Machine Unit
• Welding Pens (integrated or external, depending on configuration)
• Virtalähde
• Kuusiokoloavaimet (säätöjä varten)
• Spare Welding Pins
• Käyttöopas (tämä asiakirja)
• Other accessories as shown in product images.

Kuva 2: Tyypillinen pakkauksen sisältö

4. Tuotteen ominaisuudet

• Lämpösuojaus: Designed for low heat generation, preventing overheating during operation.
• Comfortable Welding Pen: The welding pen remains cool, preventing hand burns during extended use.
• Stable Welding Current: Provides up to 3500A pulse current with stable output, minimizing battery damage. The actual pulse current is displayed on the LED screen.
• High-Quality Welding Spots: Produces fine, uniform, and strong welding spots without blackening, achieving industrial-grade stored energy welding quality.
• Koneen turvallisuus: Matalan tilavuudentage supply system with CE certification, ensuring high safety by preventing heat generation, flammability, and explosions.
• Reliability and Longevity: Incorporates a highly reliable internal industrial super energy storage capacitor and laser welding busbar technology for long service life and consistent welding quality.

Kuva 3: Päättynytview tärkeimmistä tuoteominaisuuksista

5. Tekniset tiedot

Figure 4: Detailed product parameters and dimensions

6. Asennus

1. Pura pakkauksesta: Poista kaikki osat varovasti pakkauksesta. Tarkista mahdolliset kuljetusvauriot.
2. Sijoitus: Place the welding machine on a stable, level, and non-flammable surface in a well-ventilated area.
3. Yhdistä hitsauskynät: Insert the welding pens securely into the designated output ports on the front of the machine. Ensure a firm connection.
4. Liitä virta: Plug the power adapter into the machine's power input port, then connect the adapter to a suitable 100V AC power outlet.
5. Alkutarkastus: Before powering on, ensure all connections are secure and there are no loose wires or foreign objects near the welding tips.

Figure 5: Welding pens connected to the machine

Figure 6: External welding pen and power adapter setup

7. Käyttöohjeet

1. Virta päälle: Press the PWR/SET button to turn on the machine. The LED display will illuminate.
2. Valitse hitsaustila: The machine supports different welding modes. For Aluminum to Nickel welding, press the AL/NI button (if available, indicated by a red light) to activate this dedicated mode. For Nickel to Nickel spot welding, ensure the AL/NI button is not pressed.
3. Säädä asetuksia: Use the UP and DOWN buttons to adjust welding parameters such as pulse time and preloading delay time. The display shows the current settings and actual pulse current.
4. Valmistele työkappale: Ensure the surfaces to be welded are clean and free of oxidation or contaminants.
5. Suorita hitsaus: Position the welding tips firmly against the workpiece. The machine will automatically discharge the capacitor to perform the weld. Observe the welding spot quality.
6. Verify Weld Quality: A good weld should be fine, uniform, and strong. The machine is capable of welding up to 0.5mm nickel and 0.2mm aluminum.

Figure 7: Welding mode selection (Aluminum to Nickel vs. Nickel to Nickel)

Kuva 8: Esimample of 0.2mm pure nickel welding and tensile strength test

7.1. Viralliset tuotevideot

8. Huolto

• Puhdistus: Regularly clean the welding tips and the machine's exterior with a dry, soft cloth. Ensure no metal dust or debris accumulates around the welding area.
• Kärjen vaihto: Replace welding tips when they become worn or pitted to ensure consistent weld quality. Use the provided hex wrenches for replacement.
• Varastointi: Store the machine in a dry, cool place, away from direct sunlight and moisture, when not in use.
• Tarkastus: Tarkista kaapelit ja liitännät säännöllisesti kulumisen tai vaurioiden varalta.

9. Vianmääritys

10. Takuu ja tuki

For warranty information, please refer to the documentation provided with your purchase or contact Heltec BMS directly. The product is designed for high reliability and long service life, utilizing industrial-grade components.

If you encounter any issues not covered in this manual or require technical assistance, please contact Heltec BMS customer support through their official websivusto tai jälleenmyyjä, josta tuote ostettiin.

Valmistaja: heltec bms

Mallinumero: HT-SW01H+2040M25