1. Johdanto ja loppuview
The GODIYMODULES Mini USB Host Shield 2.0 is designed to enable Arduino (specifically Arduino Pro Mini 3.3V/8MHz/328) to function as a USB host. This capability allows the Arduino to communicate with various USB slave devices such as USB keyboards, mice, USB flash drives, and cameras. It also supports implementation of Google ADK (Android Open Accessory Development Kit) for interaction with Android system mobile phones.
This shield utilizes an SPI interface for communication with the microcontroller and supports USB hub functionality. It operates at a voltage 3.3V DC.
2. Tärkeimmät ominaisuudet
- Enables USB host functionality for Arduino Pro Mini (3.3V/8MHz/328).
- Compatible with USB slave devices including keyboards, mice, USB flash drives, and cameras.
- Supports Google ADK for Android mobile phone communication.
- Utilizes SPI interface for microcontroller communication.
- Supports USB hub functionality.
- Compact size: 38mm * 18mm.
- Käyttö voltage: 3.3 V DC.
3. Asennus ja yhteys
This Mini USB Host Shield 2.0 is designed for use with Arduino Pro Mini (3.3V/8MHz/328) and 3.3V FTDI adapters. Ensure your Arduino board operates at 3.3V to prevent damage.
The shield connects to the Arduino via the SPI interface. Refer to the schematic diagram below for detailed pin connections and component layout.
Figure 3.1: Schematic diagram of the Mini USB Host Shield 2.0, showing power regulation, USB interface, and SPI connections.
Tärkeimmät yhteyspisteet:
- VCC: Connect to 3.3V power supply from your Arduino.
- GND: Yhdistä maahan.
- SPI-nastat: MOSI, MISO, SCK, SS (Slave Select), INT (Interrupt), GPX (General Purpose I/O). These pins should be connected to the corresponding SPI pins on your Arduino Pro Mini.
- USB-portti: Standard USB Type-A female connector for connecting USB slave devices.
Ensure all connections are secure before applying power. Incorrect voltage or wiring can damage the shield or your Arduino board.
4. Käyttöohjeet
Once the Mini USB Host Shield 2.0 is correctly connected to your Arduino Pro Mini, you can begin programming your Arduino to interact with USB devices.
Kuva 4.1: Yläosa view of the Mini USB Host Shield 2.0, showing the USB Type-A port, MAX3421EE chip, and pin headers.
Kuva 4.2: Pohja view of the Mini USB Host Shield 2.0, showing additional pin labels and solder points.
Programming for USB Host Functionality:
- Install USB Host Library: Download and install the necessary USB Host Shield 2.0 library for Arduino IDE. This library provides functions to interact with various USB devices.
- Liitä USB-laite: Plug your desired USB slave device (e.g., keyboard, mouse, flash drive) into the USB Type-A port on the shield.
- Lähetä luonnos: Write and upload an Arduino sketch that utilizes the USB Host library to detect and communicate with the connected device. Examples for common devices are usually included with the library.
Google ADK Implementation:
For Google ADK applications, the product provides compiled APK installation packages and ADK source files. These resources are compatible with the shield and can be used to develop Android applications that interact with your Arduino project via the USB Host Shield.
5. Tekniset tiedot
| Parametri | Arvo |
|---|---|
| Merkki | GODIYMODULES |
| Mallin nimi | Mini USB Host Shield 2.0 |
| Yhteystekniikka | USB |
| Mukana olevat komponentit | 1pcs Mini USB Host Shield |
| Käyttöjärjestelmän yhteensopivuus | Android (for ADK) |
| Yhteensopivat laitteet | USB keyboard, mouse, USB disk, Camera, Android system mobile phone |
| Processor Brand (Controller) | Atmel (referring to compatible Arduino) |
| Tuotteen mitat | 38mm x 18mm |
| Nettopaino | 4.5 g |
| Käyttö Voltage | DC 3.3V |
6. Vianmääritys
- Yhteensopivuusongelmat: This shield is primarily designed for Arduino Pro Mini (3.3V/8MHz/328). While it may work with Arduino Uno with appropriate level shifters, it is generally not compatible with Arduino Mega 2560 without significant modifications and advanced knowledge. Ensure your Arduino board operates at 3.3V or use proper voltage level conversion.
- Unclear Pin Labels: If the silk screening on the board for pin identification is unclear, refer to the provided schematic diagram (Figure 3.1) for accurate pin assignments and connections.
- Laitetta ei havaittu:
- Verify all connections between the shield and Arduino are correct and secure.
- Ensure the USB Host library is correctly installed and the sketch is properly configured for the specific USB device.
- Check the power supply to the shield and Arduino. Insufficient power can prevent USB devices from functioning.
- Testaa toisella USB-laitteella sulkeaksesi pois itse laitteen ongelmat.
7. Huolto
To ensure the longevity and proper functioning of your Mini USB Host Shield 2.0, follow these general maintenance guidelines:
- Käsittele varovasti: Electronic components are sensitive. Avoid dropping the board or subjecting it to excessive force.
- Pidä kuivana: Protect the board from moisture and liquids, which can cause short circuits and corrosion.
- Puhtaus: Pidä levy puhtaana pölystä ja roskista. Käytä tarvittaessa pehmeää, kuivaa harjaa tai paineilmaa puhdistukseen.
- Oikea säilytys: When not in use, store the shield in an anti-static bag to protect it from electrostatic discharge.
8. Takuu ja tuki
This GODIYMODULES Mini USB Host Shield 2.0 comes with a 2 vuoden valmistajan takuu. Tämä takuu kattaa materiaali- ja valmistusvirheet normaalikäytössä.
For technical support, inquiries, or warranty claims, please contact GODIYMODULES directly through their official channels or the retailer from whom the product was purchased. Please provide your purchase details and a clear description of the issue when seeking support.