Baseus PrimeTrip C02 Go Magnetic Phone Holder User Manual

1. Johdanto

The Baseus PrimeTrip C02 Go Magnetic Phone Holder is designed to securely mount your smartphone in your vehicle. It features a powerful magnetic attraction and an upgraded 3M adhesive for stable installation on various flat surfaces within your car. This manual provides instructions for proper installation, operation, and maintenance of your device.

Kuva 1.1: ohiview of the Baseus PrimeTrip C02 Go Magnetic Phone Holder. The holder is black with a sleek, curved design, featuring a circular magnetic head and a base with a textured surface for dashboard placement.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet:

• 1 x Baseus C02 Car Mount
• 2 x 3M Adhesive Tapes (one pre-applied, one spare)
• 1 x Metal Ring (for non-MagSafe compatible phones)
• 1 x Metal Sticker (for attaching the metal ring)
• 1 x Alcohol Pad (for surface preparation)
• 1 x Käyttöohje

3. Turvallisuustiedot

• Varmista, että puhelimen pidike on tukevasti kiinni eikä estä liikkumistasi. view of the road or interfere with vehicle controls (e.g., airbags, dashboard indicators).
• Do not install the holder in a location that could become a projectile hazard in the event of an accident.
• Avoid adjusting the holder or your phone while driving. Make all adjustments before starting your journey.
• Keep the magnetic holder away from sensitive electronic devices that may be affected by magnetic fields.

4. Asennus ja asennus

Follow these steps for optimal installation of your Baseus PrimeTrip C02 Go Magnetic Phone Holder:

1. Valitse asennuspaikka: Select a flat, clean surface on your dashboard, center console, or windshield. Ensure the chosen location does not obstruct your driving view tai ajoneuvon hallintalaitteita.
2. Puhdista pinta: Use the provided alcohol pad to thoroughly clean the chosen mounting surface. Allow it to dry completely before proceeding.
3. Apply the Holder: Peel off the protective film from the 3M adhesive tape on the base of the holder. Firmly press the holder onto the cleaned surface for at least 30 seconds.
4. Salli tarttuminen: For maximum adhesion, allow the 3M adhesive to cure for 24 hours before attaching your phone.
5. Muille kuin MagSafe-puhelimille: If your phone or phone case is not MagSafe compatible, attach the included metal ring to the back of your phone or phone case using the metal sticker. Ensure it is centered for optimal magnetic connection.

Image 4.1: The phone holder securely installed on a car dashboard, demonstrating its stable placement and the strong 3M VHB tape adhesion, capable of holding up to 1.8kg.

5. Käyttöohjeet

Once installed, operating your phone holder is straightforward:

1. Puhelimen liittäminen: Simply bring your MagSafe-compatible phone (or phone with the metal ring attached) close to the magnetic head of the holder. The powerful magnets will securely snap your phone into place.
2. Säätäminen Viewkulma: The holder features a 360° rotatable magnetic head, allowing you to switch between portrait and landscape modes. The arm also allows for 180° up and down adjustment to achieve your desired viewkulma.
3. Puhelimen irrottaminen: Gently pull your phone away from the magnetic head to detach it.

Image 5.1: The phone holder demonstrating its 360-degree rotation capability, allowing the phone to be positioned in both landscape and portrait orientations for optimal viewing.

Image 5.2: An illustration showing the powerful magnetic attraction of the holder, capable of securely holding a smartphone even on bumpy roads with up to 18N of force.

6. Yhteensopivuus

The Baseus PrimeTrip C02 Go Magnetic Phone Holder offers wide compatibility:

• MagSafe Compatible Devices: Directly compatible with iPhone 15/14/13/12 Pro Plus Max Mini series and other MagSafe-enabled devices or cases.
• Universal Smartphone Compatibility: For all other smartphones, including Samsung, Huawei, Xiaomi, Redmi, HTC, Blackberry, Google Pixel, Sony, LG, OnePlus, Motorola, ZTE, etc., use the included metal ring for magnetic attraction.
• Ajoneuvojen yhteensopivuus: Applicable to all cars, installable on any flat surface such as the dashboard, center console, or windshield.

Image 6.1: The phone holder positioned in front of various car models, illustrating its wide compatibility and suitability for installation in any vehicle.

7. Huolto

To ensure the longevity and optimal performance of your phone holder:

• Clean the holder regularly with a soft, dry cloth to remove dust and debris.
• Vältä voimakkaiden kemikaalien tai hankaavien puhdistusaineiden käyttöä, sillä ne voivat vahingoittaa materiaalia.
• If the adhesive needs to be replaced, use the spare 3M adhesive tape provided in the package. Ensure the surface is clean and dry before applying new adhesive.

8. Vianmääritys

• Issue: Phone not holding securely.
  Ratkaisu: Ensure your phone is MagSafe compatible or has the metal ring properly attached and centered. Check for any obstructions between the phone and the holder.
• Issue: Adhesive not sticking.
  Ratkaisu: Ensure the mounting surface was thoroughly cleaned with the alcohol pad and completely dry before application. Press firmly for at least 30 seconds and allow 24 hours for the adhesive to cure. If issues persist, use the spare 3M adhesive tape.
• Issue: Holder feels loose.
  Ratkaisu: Re-check the adhesive bond. If necessary, remove the holder, clean the surface, and reapply with a new 3M adhesive tape.

9. Tekniset tiedot

10. Takuu ja tuki

Takuutietoja tai teknistä tukea varten katso tuotteen mukana toimitettu takuukortti tai käy Baseuksen virallisella verkkosivustolla. website. You may also contact Baseus customer service directly for assistance.