TOPTECH TV-kiinnikkeen käyttöohje

Tärkeitä turvallisuustietoja

Please read this entire instruction manual before installation. If you have any questions regarding these instructions or the safety of the installation, please contact TOPTECH customer support. Improper installation may cause product damage or personal injury.

• Do not install this product on a wall that is not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
• This mount is designed for use with flat-panel TVs weighing up to 132 lbs (60 kg). Do not exceed this weight capacity.
• Verify VESA compatibility (mounting hole patterns) of your TV with the mount before installation. This mount supports VESA patterns up to 600x400mm.
• Always use a stud finder to locate wood studs if mounting on drywall. If mounting on concrete or brick, use appropriate anchors (not always included, may need to be purchased separately).
• Ensure all screws are tightened securely, but do not overtighten. Overtightening can damage the screws or the mounting surface.
• Pidä lapset ja lemmikkieläimet loitolla asennuksen aikana.
• Jos olet epävarma jostakin asennusprosessin osasta, pyydä apua pätevältä ammattilaiselta.

Pakkauksen sisältö

Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact TOPTECH customer service for replacement parts.

Kuva: Yliview of the TOPTECH Fixed TV Mount, showing the wall plate and two TV brackets.

Komponenttiluettelo:

• A. Seinälevy (x1)
• B. TV-telineet (x2)
• C. M4x12mm Screws (various quantities)
• D. M6x12mm Screws (various quantities)
• E. M8x16mm Screws (various quantities)
• F. Washers (various quantities)
• G. Spacers (various quantities)
• H. Concrete Anchors (x4) - For concrete/brick walls only
• I. Lag Bolts (x4) - For wood stud walls only
• J. Bubble Level (x1)

Note: Specific screw sizes and quantities may vary. Refer to the actual hardware bag for precise counts.

Tekniset tiedot

Kuva: Sivuprofiilifile of the TV mount, illustrating its ultra-slim design that positions the TV close to the wall.

Asennusohjeet

Follow these steps carefully to ensure a safe and secure installation of your TOPTECH TV mount.

Vaihe 1: Asennusta edeltävät tarkastukset

• Tarkista television VESA-kuvio: Locate the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes (center to center). This is your TV's VESA pattern. Ensure it is within the mount's supported range (up to 600x400mm).
• Määritä asennuspaikka:
  • Mittaa viewing height and distance for optimal placement.
  • Consider the room layout for the best viewkulmat.
  • Ensure there is proper ventilation around the TV for heat dissipation.
• Tunnista seinätyyppi: This mount can be installed on wood stud walls or solid concrete/brick walls. Do NOT install on drywall alone.
• Locate Studs (for wood stud walls): Use a stud finder to locate the center of the wood studs. Mark the edges and center of the studs. It is recommended to mount the wall plate to at least two studs for maximum security.

Vaihe 2: Kiinnitä television kiinnikkeet televisioon

Aseta televisio varovasti kuvaruutu alaspäin pehmeälle ja puhtaalle alustalle, jotta näyttö ei vaurioidu.

1. Select the correct diameter and length screws (C, D, or E) that fit your TV's mounting holes. If the screws are too long, use spacers (G) to ensure a snug fit without damaging internal components.
2. Align the TV brackets (B) with the mounting holes on the back of your TV. Ensure the hooks on the brackets are facing downwards.
3. Secure the TV brackets to the TV using the selected screws and washers (F). Tighten firmly with a screwdriver, but do not overtighten.

Image: Detail of the double hook design on the TV brackets, ensuring stable and secure attachment to the wall plate.

Vaihe 3: Kiinnitä seinälevy seinään

1. Hold the wall plate (A) against the wall at your desired height. Use the included bubble level (J) to ensure it is perfectly horizontal. Mark the drilling locations through the holes on the wall plate.
2. Puurunkoisille seinille: Drill pilot holes into the center of the marked studs using a suitable drill bit (e.g., 7/32" or 5.5mm). Secure the wall plate to the studs using the lag bolts (I) and washers.
3. For Solid Concrete/Brick Walls: Drill holes using a masonry drill bit (e.g., 3/8" or 10mm). Insert concrete anchors (H) flush with the wall surface. Secure the wall plate using the lag bolts (I) and washers into the anchors.
4. Ensure the wall plate is securely fastened to the wall and level before proceeding.

Vaihe 4: Ripusta televisio seinälevyyn

1. Nosta televisio (kiinnikkeineen) varovasti avun kanssa ja kiinnitä television kiinnikkeet seinälevyn yläreunaan.
2. Gently lower the TV until the brackets fully engage with the wall plate. The double hook design ensures a stable connection.
3. Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these screws to secure the TV to the wall plate and prevent accidental dislodging.

Image: Visual guide demonstrating the simple process of hanging the TV onto the pre-installed wall mount.

Operating the Mount (Tilt Adjustment)

This TOPTECH TV mount offers a fixed position with a convenient tilt adjustment feature to optimize your viewkokemusta ja vähentää häikäisyä.

1. To adjust the tilt angle, locate the tilt knobs or bolts on the side of the TV brackets.
2. Loosen these knobs/bolts slightly (do not remove them).
3. Carefully tilt the TV to your desired angle, within the range of -8° to 0°.
4. Once the desired angle is achieved, securely tighten the tilt knobs/bolts to lock the TV in place.

Image: Illustration demonstrating the available tilt range of the TV mount, from 0 degrees (flat) to -8 degrees (downward tilt).

Note: While the product data mentions "Swivel", this specific fixed mount model primarily offers tilt functionality as depicted in the product images and typical for low-profile fixed mounts.

Huolto

Regular maintenance helps ensure the longevity and safe operation of your TV mount.

• Puhdistus: Pyyhi teline pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
• Tarkista liitännät: Periodically (e.g., every 6-12 months), check all screws and bolts to ensure they remain securely tightened. Do not overtighten.
• Tarkista vauriot: Visually inspect the mount for any signs of wear, corrosion, or damage. If any issues are found, contact TOPTECH customer support and do not use the mount until it is repaired or replaced.

Vianetsintä

Jos asennuksen aikana tai sen jälkeen ilmenee ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut.

Takuu ja asiakastuki

TOPTECH stands behind the quality of its products. For warranty information, technical assistance, or to report missing/damaged parts, please contact TOPTECH customer support.

Please have your product model number (Fixed TV Mount) and UPC (752574407852) ready when contacting support.

Visit the official TOPTECH store for more information: TOPTECH Store on Amazon