AMPBANK AB2000

AMPBANK AB2000 2000A kannettavan apukäynnistimen käyttöohje

Malli: AB2000

1. Tuote ohiview

The AMPBANK AB2000 is a powerful and portable jump starter designed to start 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines. It also functions as a portable power bank and features an ultra-bright LED flashlight for emergency situations.

AMPBANK AB2000 Jump Starter with specifications for 12V, 8.0L Gas, 6.0L Diesel, and 2000A peak current.

Kuva: The AMPBANK AB2000 Portable Jump Starter, highlighting its 2000A peak current, compatibility with 12V vehicles, and capacity for up to 8.0L gas and 6.0L diesel engines.

2. Turvallisuustiedot

Lue aina kaikki turvallisuustiedot ennen tuotteen käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai vakavan vamman.

  • Keep the jump starter power above 50% for optimal starting efficiency.
  • Älä käytä apukäynnistintä, jos johdot tai napa ovat vaurioituneet.amps ovat vaurioituneet.
  • Varmista oikea napaisuuskytkennät (punainen napaamp positiiviseen, mustaan ​​clamp negatiiviseksi).
  • Vältä oikosulkuaamps.
  • Do not expose the device to water, rain, or extreme temperatures.
  • Pidä poissa lasten ulottuvilta.
  • The AMPBANK jump starter incorporates 8 safety protections: anti-spark, anti-overcharge, anti-short circuit, anti-reverse connection, anti-surge, reverse polarity protection, over-discharge protection, and over-voltage suojaus.
AMPBANK AB2000 Jump Starter highlighting 8 built-in safety protections including reverse polarity, over discharge, short circuit, over voltage, spark proof, over current, reverse charge, and over temperature protection.

Kuva: Visuaalinen esitys AMPBANK AB2000's 8 built-in safety protections, ensuring safe operation.

3. Mitä laatikossa on

Pura kaikki tuotteet huolellisesti pakkauksesta ja varmista, että olet saanut seuraavat:

  • AMPBANK AB2000 Car Jump Starter (x1)
  • Jumper Cable with Smart Clamps (x1)
  • USB Type-C -latauskaapeli (x1)
  • Käyttöopas (x1)
  • EVA Carrying Case (x1)
Sisältö AMPBANK AB2000 package including the jump starter unit, battery clamps, Type-C charging cable, user manual, and EVA carrying case.

Kuva: Kaikki komponentit sisältyvät pakettiin AMPBANK AB2000 package, neatly arranged.

4. Tuotteen ominaisuudet ja komponentit

Familiarize yourself with the key features and ports of your AMPBANK AB2000 jump starter:

  • Virtapainike/Akun merkkivalo: Displays current battery level and turns the device on/off.
  • Apukäynnistysportti: Liitetään älykkäisiin käynnistyskaapeleihin.
  • USB Type-C Input/Output (PD18W): Apukäynnistimen ja muiden laitteiden lataamiseen.
  • USB-A Output (5V/3A): For charging mobile phones, tablets, and other USB-powered devices.
  • DC Output (12-16.8V/10A): 12 V tasavirtalaitteiden virransyöttöön.
  • LED-taskulamppu: Provides illumination with multiple modes (stable, strobe, SOS).
AMPBANK AB2000 Jump Starter showing its various ports and LED flashlight.

Kuva: The AMPBANK AB2000 unit, showcasing its design and interface elements.

5. Apukäynnistimen lataaminen

Ennen ensimmäistä käyttökertaa lataa akku täyteen AMPBANK AB2000. It is recommended to recharge the jump starter once every three months if not used for a long time to maintain battery health.

  1. Connect the provided USB Type-C charging cable to the Type-C input/output port on the jump starter.
  2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
  3. The battery indicator lights will illuminate and flash during charging. All four lights will be solid when fully charged.

6. Käyttöohjeet: Ajoneuvon käynnistäminen apuvirralla

Varmista, että apukäynnistysavun varaus on vähintään 50 % ennen kuin yrität käynnistää ajoneuvoa apukäynnistyksellä.

  1. Kytke käynnistyskaapelit: Insert the blue plug of the smart jumper cables into the jump start port on the AMPBANK AB2000. Ensure it is fully seated.
  2. Kiinnitä akkuun:
    • Kiinnitä punainen positiivinen (+) clamp ajoneuvon akun positiiviseen (+) napaan.
    • Kiinnitä musta negatiivinen (-) klamp ajoneuvon akun negatiiviseen (-) napaan.

    Älykäs clamp indicator light will show the connection status. A solid green light indicates a correct and ready connection.

  3. Käynnistä ajoneuvo: Mene autoosi ja käynnistä moottori.
  4. Irrota kaapelit: Once the vehicle starts, immediately remove the black negative (-) clamp from the vehicle battery, then remove the red positive (+) clamp. Finally, disconnect the smart jumper cables from the jump starter.

Using "BOOST" Mode for Completely Dead Batteries

If the vehicle battery is completely dead or has very low voltage, the standard jump start procedure might not work. In such cases, use the "BOOST" function:

  1. Follow steps 1 and 2 above to connect the jumper cables to the jump starter and the vehicle battery.
  2. Press and hold the "BOOST" button on the smart clamp for 3 seconds. The indicator light will turn solid green, indicating "BOOST" mode is active.
  3. Immediately start the vehicle within 30 seconds. If the car does not start, the "BOOST" mode will exit, and you will need to repeat the process.
  4. Once the vehicle starts, immediately remove the black negative (-) clamp, sitten punainen positiivinen (+) clamp, and finally disconnect the smart jumper cables from the jump starter.
AMPBANK AB2000 Jump Starter showing the 'BOOST' button on the smart clamp and instructions to use it for dead batteries.

Kuva: The AMPBANK AB2000 connected to a car battery, illustrating the "BOOST" mode button on the smart clamp for starting completely dead batteries.

7. Muut toiminnot

7.1 Kannettava varavirtalähde

The AB2000 can charge various electronic devices:

  • USB Type-C (PD18W) & USB-A (5V/3A): Connect your mobile phone, tablet, or other USB-powered devices using their respective charging cables to the appropriate output ports.
  • DC Output (12-16.8V/10A): Use this port to power 12V DC devices, such as car vacuum cleaners or tire inflators (ensure compatibility).
AMPBANK AB2000 Jump Starter charging a smartphone and a tablet via its USB-A and USB Type-C ports, also showing a DC output port.

Kuva: The AMPBANK AB2000 functioning as a portable power bank, charging a smartphone and a tablet simultaneously.

7.2 Ultra-Bright LED Light

The built-in LED flashlight offers three modes for various situations:

  1. Kytkeminen päälle/pois päältä: Press and hold the flashlight button for 3 seconds.
  2. Tilan vaihtaminen: Short press the flashlight button to cycle through modes: Stable Light → Strobe Light → SOS Signal.
AMPBANK AB2000 Jump Starter with its LED flashlight illuminated, showing options for lighting, SOS, and strobe modes.

Kuva: The AMPBANK AB2000's high-power LED flashlight in use, demonstrating its utility for illumination and emergency signaling.

8. Huolto

  • Lataus: If the jump starter is not used for a long time, it is recommended to recharge it once every three months to prolong battery life.
  • Puhdistus: Puhdista laite pehmeällä, kuivalla liinalla. Älä käytä voimakkaita kemikaaleja tai hankaavia materiaaleja.
  • Varastointi: Store the jump starter in its EVA carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

9. Vianmääritys

OngelmaMahdollinen syyRatkaisu
Ajoneuvo ei käynnisty.Apukäynnistysakun varaus on liian heikko.Ensure the jump starter has at least 50% charge. Recharge if necessary.
Ajoneuvo ei käynnisty.Incorrect cable connection or dirty battery terminals.Tarkista, että clamps are securely connected to the correct battery terminals. Clean battery terminals if corroded.
Ajoneuvo ei käynnisty.Vehicle battery is completely dead.Use the "BOOST" mode as described in Section 6.
Smart clamp merkkivalo on punainen tai vilkkuu.Error in connection (e.g., reverse polarity, short circuit).Irrota clamps and re-connect them correctly, ensuring red to positive and black to negative. Refer to safety information.
Jump starter not charging devices.Jump starter battery is low or device is incompatible.Check jump starter battery level. Ensure the device being charged is compatible with the output specifications.

10. Tekniset tiedot

OminaisuusYksityiskohta
MalliAB2000
Huippuvirta2000A
Ajoneuvojen yhteensopivuus12V vehicles, up to 8.0L Gas / 6.0L Diesel Engines
Akun kapasiteetti59.2 Amp Tunnit (litiumioniakku)
C-tyypin USB-tulo/-lähtöPD18W
USB-A-lähtö5V/3A
DC-lähtö12-16.8V/10A
LED taskulamppu300 Lumen (Stable, Strobe, SOS modes)
Tuotteen paino3.02 kiloa
Pakkauksen mitat10.83 x 6.34 x 4.25 tuumaa

11. Takuu ja tuki

The AMPBANK AB2000 comes with a 1-year quality assurance warranty and a 30-day free refund period. Lifetime free technical support is also provided.

For any questions or support needs, please contact AMPBANK customer service.

© 2024 AMPBANK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.