Axis Communications C1310-E MK II

AXIS C1310-E Mk II Network Horn Speaker

Käyttöopas

1. Johdanto

The Axis Communications AXIS C1310-E Mk II Network Horn Speaker is designed for outdoor environments, providing clear audio for various applications. This standalone unit allows for remote warnings, emergency instructions, and general voice messages. It features built-in memory for pre-recorded messages and supports live speak functionality. Digital Signal Processing (DSP) ensures high-quality sound. The speaker integrates easily with network video, access control, analytics, and VoIP systems (supporting SIP) through open standards. Its flexible and scalable design makes it a cost-effective solution for system integration.

Keskeisiä ominaisuuksia ovat:

  • All-in-one kaiutinjärjestelmä
  • Connects to standard network
  • Simple installation with Power over Ethernet (PoE)
  • Remote health testing capabilities
  • Two input/outputs (GPIO)

2. Turvallisuustiedot

Please read all safety instructions before installing or operating the AXIS C1310-E Mk II Network Horn Speaker. Keep this manual for future reference.

  • Asennus: Asennuksen saa suorittaa vain pätevä henkilöstö kaikkien paikallisten määräysten ja määräysten mukaisesti.
  • Virtalähde: Use only Power over Ethernet (PoE) compliant power sources. Do not connect to non-PoE power sources directly.
  • Ympäristö: The speaker is designed for outdoor use and is waterproof. However, avoid submerging the device or exposing it to extreme conditions beyond its specified operating range.
  • johdot: Varmista, että kaikki kaapelit on kiinnitetty kunnolla ja suojattu vaurioilta.
  • Asennus: Mount the speaker securely to a stable surface capable of supporting its weight.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

  • AXIS C1310-E Mk II Network Horn Speaker
  • Asennusopas / dokumentaatio
  • Grommets (for cable entry)
  • Mounting bracket and hardware (may vary by region/kit)

4. Asennus

This section outlines the steps for installing and connecting your AXIS C1310-E Mk II Network Horn Speaker.

4.1 Kaiuttimen asennus

The AXIS C1310-E Mk II is designed for wall or pole mounting. Ensure the chosen mounting surface is robust enough to support the speaker's weight (approximately 4 pounds) and withstand environmental conditions.

Axis Communications AXIS C1310-E Mk II Network Horn Speaker

An image showing the Axis Communications AXIS C1310-E Mk II Network Horn Speaker, typically mounted on a wall or pole, highlighting its robust design.

  1. Select a suitable mounting location, considering optimal sound coverage and cable routing.
  2. Attach the mounting bracket (if separate) to the desired surface using appropriate screws and anchors.
  3. Secure the speaker to the mounting bracket according to the instructions provided with the bracket.

4.2 Virta- ja verkkoyhteys

The speaker connects to your network and receives power via a single Ethernet cable using Power over Ethernet (PoE).

  1. Route an Ethernet cable from a PoE-enabled network switch or PoE injector to the speaker's Ethernet port.
  2. Ensure the cable is properly sealed using the provided grommets to maintain the speaker's waterproof rating.
  3. Once connected, the speaker will power on and attempt to obtain an IP address from your network.

5. Kaiuttimen käyttö

The AXIS C1310-E Mk II is managed and operated through a network interface or compatible software/app.

5.1 Alkukokoonpano

  1. Use Axis IP Utility or a similar network discovery tool to locate the speaker's IP address on your network.
  2. Access the speaker's web käyttöliittymä syöttämällä sen IP-osoite kohtaan a web selain.
  3. Follow the on-screen prompts to set up administrator credentials and configure basic network settings.

5.2 Äänenhallinta

  • Live Speak: Utilize the integrated microphone and speaker for two-way communication or live announcements through the web interface or integrated VMS (Video Management System).
  • Pre-recorded Messages: Upload and manage pre-recorded audio files for automated announcements or scheduled playback.
  • Äänenvoimakkuuden säätö: Adjust the speaker's output volume via the web interface or connected control system.

5.3 Integration with Other Systems

The speaker supports open standards for integration with network video, access control, analytics, and VoIP systems (SIP). Refer to the Axis Communications website for detailed integration guides and APIs.

6. Huolto

Regular maintenance ensures optimal performance and longevity of your AXIS C1310-E Mk II Network Horn Speaker.

  • Puhdistus: Periodically clean the exterior of the speaker with a soft, damp kangas. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
  • Tarkastus: Regularly inspect the mounting hardware and cables for any signs of wear, corrosion, or damage. Tighten any loose connections.
  • Laiteohjelmistopäivitykset: Tarkista Axis Communications website for available firmware updates. Keeping the firmware updated ensures the latest features and security patches.

7. Vianmääritys

Tässä osiossa on ratkaisuja yleisiin ongelmiin, joita saatat kohdata.

OngelmaMahdollinen syyRatkaisu
Ei virtaa/Kaiutin ei käynnistyNo PoE power; Faulty Ethernet cable; PoE switch issueVerify PoE source is active; Check Ethernet cable for damage; Test with a different PoE port/injector.
Ei verkkoyhteyttäIncorrect network settings; Cable issue; Firewall blocking accessCheck IP address configuration; Verify cable connection; Ensure network firewall allows communication.
Ei äänilähtöäVolume too low; Muted; Audio source issue; Speaker faultIncrease volume; Unmute speaker; Verify audio source is active; Perform a factory reset if necessary.
Vääristynyt ääniVolume too high; Environmental interference; Speaker damageReduce volume; Check for sources of interference; Contact support if distortion persists.

8. Tekniset tiedot

Technical specifications for the AXIS C1310-E Mk II Network Horn Speaker.

OminaisuusYksityiskohta
Mallin nimiC1310-E MK II
AsennustyyppiSeinäteline
MateriaaliMetallia, Muovia
Kaiuttimen tyyppiUlkona
ErikoisominaisuusSisäänrakennettu mikrofoni
Tuotteen mitat12" S x 7" L x 9" K
Tuotteen paino4 puntaa
VedenkestävyystasoVedenpitävä
ValvontamenetelmäSovellus
Kaiuttimen koko12 tuumaa
VirtalähdeCorded Electric (via PoE)
Kaiuttimen suurin lähtöteho100 wattia
Taajuusvaste20 Hz (minimi)
YhteystekniikkaEthernet
ÄänilähtötilaMono
Yhteensopivat laitteetLaptop, Smartphone, Tablet, Television (for control/integration)

9. Takuu ja tuki

Takuu: The AXIS C1310-E Mk II Network Horn Speaker comes with a Limited Warranty. Please refer to the official Axis Communications website or your purchase documentation for specific terms and conditions regarding warranty coverage and duration.

Tekninen tuki: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Axis Communications support directly. Visit the official Axis Communications website for contact information, support resources, and frequently asked questions.