Johdanto
The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.
Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.
Pakkauksen sisältö
Tarkista pakkauksesta seuraavat tuotteet:
- 1 x Baseus Car Jump Starter
- 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
- 1 x USB-C-tyypin latauskaapeli
Tärkeimmät ominaisuudet
- Korkea suorituskyky: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
- Monikäyttöinen: Acts as both a car jump starter and a portable power bank.
- Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
- Integroitu näyttö: Digital screen shows the remaining battery level of the jump starter.
- Äärimmäisen lämmönkestävyys: High-performance polymer battery cells ensure operation in very low and high temperatures.
- Edistynyt turvallisuus: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
- Alhainen valmiustilan virrankulutus: Retains up to 85% of stored energy after one year of non-use.
- Sisäänrakennettu LED-valo: Can be used as an emergency flashlight.
- Kannettava: Compact size and technical parameters allow it to be carried on an airplane.
Turvallisuustiedot
Lue kaikki turvallisuusvaroitukset ja ohjeet ennen tuotteen käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon ja/tai vakavan vamman.
- Älä pura, muokkaa tai korjaa laitetta.
- Älä altista laitetta sateelle tai kosteudelle.
- Do not use the device if the battery clamps tai kaapelit ovat vaurioituneet.
- Varmista oikea napaisuuskytkennät (punainen napaamp positiiviseen, mustaan clamp to negative) to avoid short circuits.
- Pidä poissa lasten ulottuvilta.
- Älä käynnistä jäätynyttä akkua.
- Älä yhdistä positiivista ja negatiivista liitintäamps yhdessä.
- Käytä laitetta hyvin ilmastoidussa tilassa.
- Remove the jump starter from the car battery immediately after starting the vehicle.
- Säilytä laitetta viileässä, kuivassa paikassa, kun sitä ei käytetä.
Setup: Charging the Jump Starter
Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.
- Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
- The digital display will show the charging progress. Charge until the display indicates 100%.
- Kun lataus on täynnä, irrota latauskaapeli.
Operating Instructions: Car Jump Starting
Noudata näitä ohjeita huolellisesti käynnistääksesi ajoneuvosi apukaapeleilla:
- Step 1: Connect the Smart Clamp Kaapeli
Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.
- Step 2: Connect to Car Battery
Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
- Step 3: Start the Vehicle
Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.
- Vaihe 4: Katkaise yhteys
Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.
Operating Instructions: Power Bank Function
The Baseus BS-CH001 can also be used to charge your electronic devices.
- Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
- Liitä kaapelin toinen pää elektroniseen laitteeseesi.
- The jump starter will automatically begin charging your device. The digital display will show the remaining power.
- Once charging is complete, disconnect your device and the cable.
Huolto
- Clean the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Säilytä apukäynnistin viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
- For optimal battery life, fully charge the device at least once every 3-6 months.
- Säilytä clamp cables clean and free from corrosion.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laite ei käynnisty. | Akku on tyhjä. | Lataa apukäynnistin täyteen. |
| Auto ei käynnisty. | Väärä clamp yhteys. | Varmista, että clamps are connected to the correct battery terminals (red to +, black to -). |
| Auto ei käynnisty. | Car battery is severely damaged or frozen. | Consult a professional mechanic. Do not attempt to jump start a frozen battery. |
| Laite kuumenee käytön aikana. | Normaali toiminta suuren purkausvirran aikana. | This is normal. If it becomes excessively hot or emits smoke, discontinue use immediately. |
| Electronic device not charging. | Apukäynnistysakun varaus on heikko tai kaapeliongelma. | Ensure jump starter is charged. Check if the charging cable is properly connected and functional. |
Tekniset tiedot
| Merkki | Baseus |
| Malli | BS-CH001 |
| Kapasiteetti | 10000 3.7 mAh / 37 V / XNUMX Wh |
| Tulo Voltage (Type-C) | 5 V / 2.4 A (max) |
| USB-lähtöteho | 5 V / 2.4 A (max) |
| Aloita Voltage | 12V |
| Aloitusvirta | 500A |
| Huippuvirta | 1000A |
| Paino | 470 g |
| Mitat | 10 x 5 x 5 cm (approximate, based on product description) |
Takuu ja tuki
This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus websivusto. Jos tarvitset teknistä tukea, vianmääritysapua tai haluat tiedustella varaosista, ota yhteyttä Baseuksen asiakaspalveluun heidän virallisten kanaviensa kautta.
Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.