VEVOR 5-Mode LED Shower Panel System Instruction Manual

Johdanto

Thank you for choosing the VEVOR 5-Mode LED Shower Panel System. This comprehensive shower panel offers a luxurious and versatile showering experience with multiple water output modes and integrated LED lighting. Crafted from high-quality 304 stainless steel, this system is designed for durability and ease of use. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Turvallisuustiedot

• Varmista, että kaikki vesijohdot on katkaistu ennen asennuksen aloittamista.
• Consult a qualified plumber if you are unsure about any installation steps.
• Do not use abrasive cleaners or harsh chemicals on the stainless steel surface.
• Ensure proper sealing to prevent leaks and water damage.
• Pidä pienet osat poissa lasten ulottuvilta.

Tuote loppuview & Komponentit

The VEVOR Shower Panel System integrates multiple functions into a single, sleek unit. Key components include:

• Suihkupaneelin runko
• Overhead Shower Head (Rainfall/Waterfall)
• Body Massage Jets
• Tub-juoksuputki
• Handheld Shower Head with 59-inch (1.5m) Hose
• Brass Mixing Valve
• PVC Double Explosion-Proof Pipe
• 304 Stainless Steel Braided Nozzle
• Installation Hardware (2 x 1/2 Right Angle Adapters, 2 x 4-point Rubbers)

Figure 1: VEVOR Shower Panel System Components and Dimensions

Asennus ja asennus

This shower panel is designed for wall-mounted installation. Follow these steps for a secure setup:

1. Valmistele seinä: Ensure the installation area is clean, dry, and structurally sound. Mark the desired mounting height for the shower panel.
2. Yhdistä vesijohdot: The system uses a G 1/2" interface for consistent high flow rate and stable water pressure. Connect your hot and cold water supply lines to the brass mixing valve using the provided 1/2" right-angle adapters and 4-point rubbers. Ensure all connections are tight and leak-free.
3. Asenna paneeli: Secure the shower panel to the wall using appropriate mounting hardware (not always included, check package contents). Ensure the panel is level and firmly attached.
4. Install Handheld Shower: Attach the 59-inch (1.5m) handheld shower hose to the designated outlet on the panel and secure the handheld shower head in its bracket.
5. LED teho: The LED lights require two AA 1.5V dry batteries. Install these into the battery compartment, typically located near the top spray head.
6. Testi vuotojen varalta: Avaa päävesihana hitaasti ja tarkista kaikki liitännät vuotojen varalta.

Figure 2: Water Connections and Internal Plumbing

Käyttöohjeet

Your VEVOR shower panel offers 5 distinct shower modes for a personalized experience:

• Rainfall Mode: Provides a gentle, enveloping shower from the overhead shower head.
• Vesiputoustila: Offers a refreshing, broad stream from the overhead shower head.
• Body Massage Jets: Directs invigorating streams from the panel-mounted jets.
• Ammeen nokka: Fills your bathtub quickly and efficiently.
• Kädessä pidettävä suihkupää: Offers flexible showering for targeted rinsing.

Tilan valinta: Use the mode switch knob (typically the upper knob) to cycle through the different shower functions. Note: Each mode should be operated independently; they cannot be activated simultaneously.

Lämpötilan säätö: Use the lower knob, the 'Switch and Mixing Switch', to adjust water temperature and flow. Turn to the left for hotter water and to the right for cooler water. Push or pull to control water flow.

LED valot: Activate the ambient LED lights by pressing the small button on the side of the panel (requires 2 AA 1.5V batteries).

Figure 3: Overhead Shower Modes (Rainfall & Waterfall)

Kuva 4: Monitoimilähtötilat

Figure 5: Knob Control for Modes and Temperature

Huolto

Regular maintenance will ensure the longevity and optimal performance of your shower panel:

• Paneelin puhdistus: The 304 stainless steel material is resistant to fingerprints, rust, and corrosion. Clean the surface with a soft cloth and mild soap or a non-abrasive stainless steel cleaner. Avoid harsh chemicals or abrasive pads that can scratch the finish.
• Tukkeutumattomat suuttimet: The silicone nozzles on the shower heads and body jets are designed for easy cleaning. Simply rub your fingers over the nozzles to dislodge any mineral buildup or blockages. This prevents scale accumulation and maintains consistent water flow.
• Letkun huolto: Periodically check the 59-inch hose for any kinks, cracks, or signs of wear. Replace if necessary to prevent leaks.
• Akun vaihto: If the LED lights dim or stop working, replace the two AA 1.5V dry batteries.

Figure 6: Cleaning Anti-Clog Silicone Nozzles

Vianetsintä

Jos kohtaat ongelmia, katso seuraavia yleisiä vianmääritysvinkkejä:

• Alhainen vedenpaine: Check if the main water supply is fully open. Inspect hoses and connections for kinks or blockages. Clean the shower nozzles as described in the Maintenance section.
• Vuotoja: Ensure all connections are tightly sealed. If leaks persist, check the rubber washers and O-rings for damage and replace if necessary.
• LED-valot eivät toimi: Verify that the two AA 1.5V dry batteries are correctly installed and not depleted. Replace batteries if needed.
• No Water from a Specific Mode: Ensure the mode selection knob is fully engaged for the desired function. Remember that modes operate independently.

Jatkuvien ongelmien ilmetessä ota yhteyttä VEVORin asiakastukeen.

Tekniset tiedot

Takuu ja tuki

VEVOR products are designed for quality and reliability. For warranty information, product registration, or technical support, please visit the official VEVOR website or contact our customer service team. Keep your purchase receipt for warranty claims.

Online-tuki: www.vevor.com/support