Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Tärkeitä turvallisuustietoja

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• VAROITUS: Sähköiskun vaara. Irrota virta sulakkeesta tai johdonsuojakatkaisimesta ennen asennusta tai huoltoa.
• VAROITUS: Tulipalon vaara. Pidä syttyvät materiaalit poissa laitteen läheltä.amp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Varmista syöttötilavuustage is compatible with the fixture's requirements (120V-277V).
• Kaikki johdotusliitännät on tehtävä paikallisten ja kansallisten sähkömääräysten mukaisesti. Jos olet epävarma johdotuksesta, ota yhteyttä pätevään sähköasentajaan.
• Älä yritä muokata tai purkaa laitetta. Siinä ei ole käyttäjän huollettavia osia.

2. Mitä laatikossa on

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• LED-myymälävalaisimet
• Kiinnitystarvikkeet (ruuvit, ankkurit)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Lankamutterit

3. Tekniset tiedot

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltag120–277 V:n yhteensopivuus.

4. Asennus ja asennus

Follow these steps for proper installation. Ensure power is disconnected before starting.

4.1. Valmistaudu asennukseen

1. Katkaise virta: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remove Diffuser: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Valitse värilämpötila (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Kiinnikkeen asennus

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Merkin kiinnityspisteet: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Asenna asennuslaitteisto: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Valmistele johdotus: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Sähköliitäntä

1. Kytke johdot: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Työntölangat: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Suojatut yhteydet: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Viimeiset vaiheet

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Palauta virta: Turn the circuit breaker back on to restore power to the fixture.

5. Käyttöohjeet

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Värilämpötilan valinta (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000 kt: Provides a neutral white light, suitable for offices or general workspaces.
• 5000 kt: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000 kt: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Virta päälle/pois

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Huolto

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Puhdistus: Pyyhi valaisimen ulkopinta pehmeällä, kuivalla tai hieman kostealla liinallaamp liinalla. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita, sillä ne voivat vahingoittaa pintaa tai linssiä.
• Tarkastus: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Ei polttimon vaihtoa: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Vianmääritys

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• Valo ei syty:
  • Tarkista katkaisija varmistaaksesi, että virta on päällä.
  • Verify all wire connections are secure and correct.
  • Varmista, että seinäkytkin on ON-asennossa.
• Valo välkkyy:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Tarkista löysät johtoliitännät.
  • Varmista syöttötilavuustage on vakaa ja määritellyn alueen sisällä.
• Väärä värilämpötila:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Takuu ja tuki

Sunco Lighting seisoo tuotteidensa laadun takana.

• Takuu: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting website or your purchase documentation for full warranty details and terms.
• Asiakastuki: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.