ABSINA Mobile Wallbox 11 kW 16A with App Control

1. Johdanto

The ABSINA Mobile Wallbox 11 kW 16A is a versatile and portable charging solution for electric vehicles. Designed for both home and travel use, it offers convenient and safe charging with integrated app control and RFID activation. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.

Figure 1: ABSINA Mobile Wallbox 11 kW 16A. This image shows the compact design of the wallbox with its CEE plug and Type 2 charging connector.

2. Turvallisuusohjeet

Lue kaikki turvallisuusohjeet huolellisesti ennen laitteen käyttöä. Näiden ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai vakavan vamman.

• Ensure the power supply meets the specified requirements (3 phases 415 V 50/60 Hz).
• Älä käytä laitetta, jos kaapeli tai pistoke on vaurioitunut.
• Älä yritä avata tai korjata laitetta itse. Ota yhteyttä pätevään huoltohenkilöstöön.
• Keep the device away from water and extreme temperatures. The device is IP65 rated, but avoid submersion.
• Always ensure proper grounding.
• The integrated Type A+DC6 mA residual current circuit breaker provides enhanced safety. Do not bypass or modify it.
• Before installation, contact your local grid operator to register the wallbox as required.

Figure 2: Maximum Safety Features. The image highlights the Type A 30mA AC residual current protection and Type B 6mA DC fault current protection for enhanced user safety.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• ABSINA Mobile Wallbox 11 kW 16 A (three-phase)
• 3 x RFID Chips
• 3 x RFID-kortti
• Seinäkiinnitysteline
• Kiinnitysmateriaali (ruuvit, ankkurit)
• Käyttöopas (tämä asiakirja)

4. Asennus ja asennus

The ABSINA Mobile Wallbox is designed for "Plug and Play" use, requiring no complex installation. However, for permanent mounting, a wall bracket is included.

4.1 Alkuasetukset (Plug and Play)

1. Liitä virtalähteeseen: Insert the CEE plug of the Wallbox into a compatible 3-phase 415 V 50/60 Hz CEE socket.
2. Virta päälle: The Wallbox will power on automatically. If the indicator light blinks red, press the emergency stop button once to reset.
3. Valmis käytettäväksi: The Wallbox is now ready for charging, which can be activated via RFID or the app.

Figure 3: Plug & Play Functionality. This image illustrates the simple connection of the CEE plug to a power outlet, emphasizing ease of use without complex electrical installation.

4.2 Seinäkiinnitys (valinnainen)

For a more permanent setup, use the provided wall mount bracket and hardware.

1. Valitse sijainti: Select a suitable wall location near a compatible CEE socket, ensuring adequate ventilation and protection from direct weather exposure (though the unit is IP65 rated).
2. Merkitse porauspisteet: Use the wall mount bracket to mark the drilling points on the wall.
3. Poraa reikiä: Drill holes at the marked points and insert the provided anchors.
4. Turvakiinnike: Attach the wall mount bracket to the wall using the screws.
5. Mount Wallbox: Carefully slide the Wallbox onto the mounted bracket until it clicks securely into place.

Figure 4: Easy Operation. The image shows the Wallbox mounted on a wall, connected to a vehicle, demonstrating its simple "Connect. Charge." principle.

5. Käyttöohjeet

5.1 Charging Your Electric Vehicle

1. Yhdistä ajoneuvo: Plug the Type 2 charging cable from the Wallbox into your electric vehicle's charging port.
2. Aktivoi lataus:
   • Using RFID: Hold one of the provided RFID chips or cards over the RFID reader area on the Wallbox. The Wallbox will activate, and charging will begin.
   • Sovelluksen käyttäminen: Open the ABSINA app (or compatible smart home app like Tuya Smart) on your smartphone. Select the Wallbox and initiate charging from the app interface.
3. Näytön lataus: The app provides real-time data including charging voltage (V), current (A), power (kW), charged energy (kWh), and charging time.
4. Lopeta lataaminen:
   • Using RFID: Hold the RFID chip/card over the reader again to stop charging.
   • Sovelluksen käyttäminen: Stop charging directly from the app.
5. Disconnect Vehicle: Once charging is complete or stopped, unplug the Type 2 cable from your vehicle.

Figure 5: Misuse Protection. The image shows a hand activating the Wallbox with an RFID chip, illustrating the secure activation method.

5.2 Sovellusohjausominaisuudet

The dedicated app (or compatible smart home app) provides advanced control and monitoring capabilities:

• Säädä latausvirtaa: Set the charging current from 8 A to 16 A in 1 A increments to manage charging speed.
• Aseta lataustila: Choose preferred charging modes.
• Aikataulutettu lataus: Utilize the charging delay function to start charging at a later time.
• Reaaliaikaisten tietojen seuranta: View live charging statistics.
• Etäkäynnistys/-pysäytys: Control charging sessions from your smartphone.

Huomautus: While the app displays charging data, this data is typically not stored permanently on the device once the charging cable is disconnected. For historical charging data, refer to your vehicle's own app if available.

6. Huolto

To ensure the longevity and optimal performance of your ABSINA Mobile Wallbox, follow these maintenance guidelines:

• Puhdistus: Wipe the exterior of the Wallbox with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is unplugged before cleaning.
• Kaapelin tarkastus: Regularly inspect the charging cable and CEE plug for any signs of damage, fraying, or wear. If damage is found, discontinue use immediately and contact support.
• Liittimen hoito: Keep the Type 2 connector clean and free of debris. Ensure the protective cap is in place when not in use.
• Varastointi: When not in use, especially during travel, store the Wallbox in a dry, cool place, protected from direct sunlight and extreme temperatures.

Figure 6: Mobile Wallbox for Travel. This image shows the Wallbox conveniently stored in a car trunk, highlighting its portability and ease of transport.

7. Vianmääritys

If you encounter issues with your ABSINA Mobile Wallbox, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact ABSINA customer support.

8. Tekniset tiedot

9. Takuu ja tuki

ABSINA products are designed for reliability and performance. For warranty information and technical support, please refer to the official ABSINA websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa.

The manufacturer, ABSINA GmbH, is based in Germany and is committed to providing competent support.

Yhteystiedot: Please visit the official ABSINA website for the most up-to-date contact details for customer support and warranty claims.