ZURU Bunch O Bubbles Mini Bubble Blaster Instruction Manual

1. Johdanto

Thank you for choosing the ZURU Bunch O Bubbles Mini Bubble Blaster. This motorized bubble blaster is designed to create a continuous stream of bubbles for outdoor play. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Turvallisuustiedot

• Ikäsuositus: Sopii 3-vuotiaille ja sitä vanhemmille lapsille.
• Aikuisten valvonta: Adult supervision is recommended during play, especially when handling bubble solution.
• Vältä kontaktia: Do not ingest bubble solution. In case of eye contact, rinse thoroughly with water.
• Akun turvallisuus: Follow all battery safety guidelines. Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity. Remove batteries if the toy will not be used for an extended period.
• Ulkokäyttöön: Tämä tuote on tarkoitettu ulkokäyttöön.

3. Sisältö

Your ZURU Bunch O Bubbles Mini Bubble Blaster package should contain the following items:

• 1 x ZURU Bunch O Bubbles Mini Bubble Blaster
• 1 x Bottle of Bubble Solution
• 1 x Bubble Solution Tray
• 1 x käyttöohje

Image: The ZURU Bunch O Bubbles Mini Bubble Blaster and included accessories as packaged.

4. Asennus

4.1 Akun asennus

1. Locate the battery compartment on the blaster (usually on the handle or side).
2. Avaa paristolokeron kansi ruuvimeisselillä.
3. Insert the required number of appropriate batteries (e.g., AA or AAA, not included) according to the polarity indicators (+/-).
4. Aseta paristolokeron kansi takaisin paikalleen ja kiinnitä se ruuvilla.

4.2 Preparing Bubble Solution

1. Pour the included bubble solution into the provided bubble solution tray. Fill the tray to the indicated fill line, if present.
2. Ensure the tray is placed on a flat, stable surface to prevent spills.

5. Käyttöohjeet

1. Hold the Mini Bubble Blaster firmly by the handle.
2. Dip the front nozzle of the blaster into the bubble solution tray, ensuring the bubble wands are fully submerged.
3. Lift the blaster out of the tray. The wands should now have a thin film of bubble solution across them.
4. Point the blaster away from faces and press the trigger to activate the motor and fan. Bubbles will begin to stream out.
5. Re-dip the nozzle into the solution as needed to continue producing bubbles.

Image: The Mini Bubble Blaster in action, generating numerous bubbles.

6. Huolto

6.1 Puhdistus

• After each use, empty any remaining bubble solution from the tray back into its bottle or dispose of it properly.
• Wipe the exterior of the blaster and the bubble tray with a damp liinalla. Älä upota puhallinta veteen.
• Anna kaikkien osien kuivua kokonaan ilmassa ennen säilytystä.

6.2 Varastointi

• Store the blaster and bubble solution in a cool, dry place away from direct sunlight.
• Ensure batteries are removed if the blaster will not be used for an extended period to prevent leakage.

7. Vianmääritys

• No bubbles or weak bubbles:
  • Check if the bubble solution tray has enough solution.
  • Ensure the nozzle is fully dipped into the solution to coat the wands.
  • Verify that the batteries are correctly installed and not depleted. Replace if necessary.
  • Clean any residue from the bubble wands or fan area.
• Blaster not turning on:
  • Tarkista paristojen asennus ja varmista, että ne ovat tuoreita.
  • Varmista, että paristolokeron kansi on suljettu kunnolla.

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information or customer support regarding your ZURU Bunch O Bubbles Mini Bubble Blaster, please refer to the contact information provided on the product packaging or visit the official ZURU websivusto. Säilytä ostokuitti ostotodistuksena.