1. Johdanto
This manual provides essential information for the safe installation, operation, and maintenance of your Redodo 3000W Pure Sine Wave Inverter Charger. This unit integrates a 3000W pure sine wave 12V DC to 120V AC inverter with a 45A battery charger, designed for uninterruptible power supply in off-grid, RV, and home backup scenarios. It supports a continuous power output of 3000W and a surge power of up to 9000W, making it suitable for a wide range of appliances. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Turvallisuusohjeet
Always prioritize safety when installing and operating electrical equipment. Failure to follow these instructions may result in serious injury or damage to the equipment.
- Lue kaikki ohjeet: Familiarize yourself with the product's features and operation before use.
- Pätevä henkilöstö: Asennuksen ja huollon tulee suorittaa pätevä henkilöstö.
- Ilmanvaihto: Varmista invertterin ympärillä riittävä ilmanvaihto ylikuumenemisen estämiseksi.
- Vältä vettä: Älä altista invertteriä vedelle, sateelle tai liialliselle kosteudelle.
- Oikea johdotus: Always connect positive to positive and negative to negative terminals. Reverse polarity can cause severe damage.
- Akun tyyppi: Ensure the inverter settings match your battery type (Gel, AGM, SLA, CAL, LiFePO4).
- Kaapelin koko: Use appropriate cable sizes for DC and AC connections to prevent overheating and power loss.
- Pre-Charge Circuit: For safe battery connection, especially with lithium batteries, use a pre-charge circuit to prevent sparks and potential damage. Refer to the "Battery Connection" section for details.
- Hätäpysäytys: Tiedä, miten sähköt katkaistaan nopeasti hätätilanteessa.
3. Pakkauksen sisältö
Varmista, että pakkauksessasi on kaikki tarvittavat osat:
- Redodo 3000W Pure Sine Wave Inverter Charger Unit
- Kauko-ohjauspaneeli
- Kaukosäätimen kaapeli
- Battery Cables (Positive and Negative)
- Inverter Mounting Screws
- Kutisteputki
- Kuparilankaliittimet
- Muoviset ankkurit
- Urallinen ruuvimeisseli
- Käyttöopas

Image: Contents of the Redodo 3000W Inverter Charger package, including the main unit, remote control, cables, and mounting hardware.
4. Tuote ohiview
4.1 Tärkeimmät ominaisuudet
- Integrated Inverter & Charger: Combines a 3000W pure sine wave inverter (12V DC to 120V AC) and a 45A battery charger for a compact, efficient power solution.
- UPS (Uninterruptible Power Supply): Automatically switches between battery and grid power during outages, ensuring continuous electricity.
- Suuri teho: Delivers 3000W continuous power with a 9000W surge capability, suitable for demanding appliances like air conditioners and refrigerators.
- Laaja akkuyhteensopivuus: Supports Gel, AGM, Sealed Lead-Acid (SLA), Calcium (CAL), and LiFePO4 batteries, including lithium battery activation.
- Remote Control & LCD Display: Features a remote control and a real-time LCD screen for monitoring output voltage, AC input, battery voltage, and load percentage from a convenient location.
- Useita suojauksia: Built-in safeguards against overload, over-temperature, over-voltage, output load short circuit, and low-voltage.
4.2 Komponenttien tunnistetiedot

Image: Detailed diagram of the Redodo 3000W Inverter Charger showing the front and back panels with labeled components such as battery terminals, remote control port, dip switches, AC outlets, and AC input/output terminal blocks.
- Akun negatiivinen napa
- Akun positiivinen liitin
- Kaukosäätimen portti
- Setting Dip Switch (for Grid On/Inverter On, Grid On/100-120VAC Priority)
- Maaterminaali
- Charger Input Protection Circuit Breaker
- Invertterin ulostulon suojakatkaisin
- AC Outlet (Continuous Output Power: 1000W, 110-120VAC, 60Hz)
- AC-tuloliitin
- AC Output Terminal Block (Continuous Output Power: 3000W, 110-120VAC, 60Hz)
Huomautus: Maximum total continuous output power is 3000W.

Image: Close-up of the power switch on the Redodo 3000W Inverter Charger, indicating its ON/OFF positions and associated status indicators for Grid On and Inverter On modes.
The remote control and LCD display provide real-time information and allow for convenient operation, even when the inverter is installed in an inaccessible location.
5. Asennus
5.1 Invertterin asennus
Choose a dry, well-ventilated location for mounting the inverter. Ensure sufficient clearance around the unit for proper airflow and cooling. Use the provided mounting screws and anchors to secure the inverter to a stable surface.
5.2 Akun liitäntä
Before connecting the battery, ensure the inverter is turned OFF. Always connect the positive (red) terminal first, followed by the negative (black) terminal. Use the provided battery cables and ensure connections are secure.
Video: This tutorial demonstrates the safe connection of a battery bank to an inverter-charger, emphasizing the importance of setting battery type and priority settings, and using appropriate cable sizes. It also shows how to use a resistor for a pre-charge circuit to prevent sparks during negative terminal connection.
Important: Pre-Charge Circuit for Safety
To prevent sparks and potential damage from a sudden rush of current, especially when connecting to lithium batteries, it is crucial to use a pre-charge circuit. This involves briefly connecting a resistor between the negative terminal of the battery and the negative input of the inverter before making the final connection. This slowly charges the inverter's capacitors. Refer to the video above for a visual guide on implementing a pre-charge circuit.
5.3 AC-tulo/lähtöliitäntä
Connect your AC input source (grid power or generator) to the AC Input Terminal Block. Connect your AC loads to the AC Output Terminal Block or directly to the AC Outlets. Ensure all connections are secure and follow local electrical codes.

Image: A connection diagram illustrating how the Redodo 3000W Inverter Charger integrates with utility power, a generator, solar panels (via MPPT), a battery bank, and various home appliances, demonstrating its role in an uninterruptible power system.
6. Käyttöohjeet
6.1 Virran kytkeminen päälle/pois
To power on the inverter, press the ON/OFF switch located on the unit or the remote control panel. The LCD display will illuminate, showing system status. To power off, press the switch again.

Image: Close-up of the power switch on the Redodo 3000W Inverter Charger, indicating its ON/OFF positions and associated status indicators for Grid On and Inverter On modes.
6.2 Monitoring with LCD Display
The LCD display provides real-time operational data. Use the navigation buttons on the remote control or the unit to cycle through different display modes, including:
- AC -tulo Voltage ja taajuus
- Akku Voltage
- Lähtö Voltage ja taajuus
- Latausprosenttitage
- Working Mode (Grid On or Inverter On)
6.3 Setting Battery Type and Priority
The inverter-charger is compatible with various battery types. It is crucial to set the correct battery type and power priority settings using the dip switches or the remote control interface. Refer to the detailed instructions in the full user manual for specific settings for Gel, AGM, SLA, CAL, and LiFePO4 batteries.

Image: Illustration showing the Redodo 3000W Inverter Charger's compatibility with various battery types (LiFePO4, AGM, CAL, GEL, SLA) and its adjustable charging current and battery type selection features.
7. Huolto
Regular maintenance ensures the longevity and safe operation of your Redodo Inverter Charger.
- Puhdistus: Pidä invertteri puhtaana pölystä ja roskista. Käytä puhdistukseen kuivaa liinaa. Älä käytä nestemäisiä puhdistusaineita.
- Ilmanvaihto: Periodically check that the ventilation openings are not blocked.
- Liitännät: Inspect all electrical connections regularly for tightness and corrosion. Tighten any loose connections.
- Akun kunto: Näytön akun tilavuustage and health. Ensure batteries are properly charged and maintained according to their manufacturer's guidelines.
- Varastointi: If storing the inverter for an extended period, disconnect it from all power sources and store it in a cool, dry place.
8. Vianmääritys
Tässä osiossa on ratkaisuja yleisiin ongelmiin. Monimutkaisempien ongelmien osalta ota yhteyttä asiakastukeen.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Invertteri ei käynnisty | Alhainen akun tilavuustage, loose connections, faulty switch. | Tarkista akun tilavuustage and charge if low. Secure all battery and AC connections. Ensure the ON/OFF switch is in the 'ON' position. |
| Ei AC-lähtöä | Overload, short circuit, over-temperature, low battery. | Reduce load. Check for short circuits in connected appliances. Allow inverter to cool down. Charge battery. Check circuit breakers. |
| Kaukosäädin ei toimi | Loose cable connection, faulty remote. | Ensure the remote control cable is securely connected to the remote control port. Test the inverter using the main ON/OFF switch on the unit. |
| Liiallinen tuulettimen melu | Korkea sisälämpötila raskaan kuorman tai huonon ilmanvaihdon vuoksi. | Reduce load on the inverter. Ensure adequate ventilation and clear any obstructions from the fan vents. |
Video: This video provides a connection guide for a VEVOR Inverter Charger, demonstrating the steps for proper wiring and setup, which can be helpful for general troubleshooting of connection issues.
9. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallin nimi | 3000 W puhdas siniaalto invertterilaturi |
| Mallinumero | R12V2KW-Y |
| Merkki | Redodo |
| Wattage | 3000 watts (Continuous), 9000 watts (Surge) |
| Tulo Voltage | 12V DC |
| Lähtö Voltage | 120V AC |
| Lähtötaajuus | 60 Hz |
| Laturin virta | 45A |
| Tuotteen mitat | 16.54 x 7.28 x 7.09 tuumaa |
| Tuotteen paino | 51.9 kiloa |
| Suositellut käyttötavat | Koti, Sähköverkon ulkopuolinen mökki, Asuntoauto |
10. Takuu ja tuki
For warranty information, technical support, or any inquiries regarding your Redodo 3000W Pure Sine Wave Inverter Charger, please refer to the official Redodo websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.
Redodo is committed to providing multi-channel support and technical assistance. You can expect a response within 24 hours.
- Online-tuki: Visit the Redodo official websivusto usein kysyttyjen kysymysten ja tukiresurssien osalta.
- Sähköpostituki: Ota yhteyttä Hello@redodopower.com apua varten.