RESTMO-sprinkleriajastimen käyttöohje

Johdanto

Thank you for choosing the RESTMO Sprinkler Timer with Brass Inlet. This programmable water timer is designed to simplify your garden watering tasks, providing automatic control for garden hoses, outdoor faucets, drip irrigation systems, and lawn watering. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.

Kuva: Edessä view of the RESTMO Sprinkler Timer, showing the digital display and control dial.

Turvallisuustiedot

• Do not immerse the timer in water. It is IP54 waterproof, meaning it is protected against dust and splashing water, but not full immersion.
• Use only 2 x AAA 1.5V alkaline batteries (not included). Do not mix old and new batteries or different types of batteries.
• Remove batteries if the timer will not be used for an extended period to prevent leakage.
• Protect the timer from freezing temperatures. Disconnect and store indoors during winter.
• Ensure all connections are tight to prevent leaks. Teflon tape is recommended for a secure seal.

Tuote loppuview

The RESTMO Sprinkler Timer features a user-friendly design with a large LCD screen and intuitive controls.

Image: Diagram illustrating the various components of the sprinkler timer, including the brass inlet, LCD screen, control dial, and buttons.

Tärkeimmät komponentit:

• Pure Brass Inlet Thread: 360-degree rotatable for easy installation, with a built-in metal filter washer to prevent debris.
• Suuri LCD-näyttö: Displays current time, next watering time, and battery status.
• Ajastinvalinta: Used to select different settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
• OK/Manuaalinen-painike: Confirms settings and activates manual watering.
• +/- painikkeet: Adjust values and activate rain delay.
• Waterproof Battery Compartment: Houses 2 x AAA batteries.

Kuva: Lähikuva view of the 360-degree swivel pure brass inlet, highlighting its design and durability.

Asennus ja asennus

Follow these steps to install your RESTMO Sprinkler Timer:

Image: Four-panel diagram showing the installation process: installing batteries, attaching to faucet, attaching hose, and setting the program.

1. Asenna paristot: Open the waterproof battery compartment. Insert 2 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity. Close the compartment securely. Keep your hands dry during this process.
2. Kiinnitä hanaan: Screw the timer's brass inlet onto your 3/4" outdoor faucet. Hand-tighten firmly. For a leak-proof connection, wrap Teflon tape around the faucet threads before attaching the timer.
3. Kiinnitä letku: Connect your garden hose to the 3/4" hose connection at the bottom of the timer. Ensure it is tightly secured.
4. Käynnistä hana: Open your faucet fully. The timer is designed to operate under water pressure.

Käyttöohjeet

1. Aseta kello

This step sets the current time on the timer.

• Käännä valitsin asentoon ASETA KELLO.
• Paina +/- buttons to set the current hour and minute.
• Paina OK button to switch between hour and minute setup.
• Turn the dial to any other position to save changes.

2. Aseta aloitusaika

This sets when your automatic watering program will begin.

• Käännä valitsin asentoon ALOITUSAIKA.
• Paina +/- painikkeilla halutun aloitusajan asettamiseksi.
• Paina OK button to switch between hour and minute setup.
• Turn the dial to any other position to save changes.

3. Set Watering Duration (How Long)

This sets how long the watering will last for each cycle.

• Käännä valitsin asentoon KUINKA KAUAN.
• Paina +/- buttons to set the watering duration from 1 minute to 239 minutes.
• Paina OK button to switch between hour and minute setup.
• Turn the dial to any other position to save changes.

4. Set Watering Frequency (How Often)

This sets how often the watering cycles will repeat.

• Käännä valitsin asentoon KUINKA USEIN.
• Paina +/- buttons to set the watering frequency: from 1 hour to 12 hours, or from 1 day to 7 days.
• Paina OK button to switch between hour and day/hour setup.
• Turn the dial to any other position to save changes.

Image: Visual guide showing the range for 'How Long' (1-239 mins) and 'How Often' (1hr-7 days) settings.

5. Automatic Watering

Once programmed, turn the dial to ON to activate the automatic watering schedule. The LCD screen will display the remaining time of the current watering program when watering is active. When watering is off, the screen will flash between the next watering start time and the current time.

Image: Depicts the timer set to 'ON' for automatic watering, with a visual representation of the watering duration and frequency settings.

6. Manuaalinen kastelu

Kastellaksesi manuaalisesti ilman, että se vaikuttaa ohjelmoituun aikatauluun:

• With the dial at ON, long press the OK/MANUAALINEN painiketta 3 sekunnin ajan.
• Paina +/- buttons to select the desired manual watering duration (1 to 239 minutes).
• Paina OK to switch between hour and minute. The setup flashes 3 times and manual watering will automatically start.
• To cancel manual watering, turn the dial to POIS ja sitten takaisin ON.

Image: Shows how to activate manual watering and adjust its duration, with a visual of water flowing from the hose.

7. Sateen aiheuttama viive

To temporarily pause your watering schedule due to rain or other reasons:

• With the dial at ON, long press the DELAY + painiketta 3 sekunnin ajan.
• Paina +/- buttons to select a delay of 12, 24, 48, or 72 hours.
• Paina OK or wait for 3 seconds to start the rain delay.
• To cancel rain delay, turn the dial to POIS ja sitten takaisin ON.

Image: Illustrates the rain delay function with options for 12, 24, 48, and 72-hour delays.

8. Lopeta kastelu

To completely stop all watering programs:

• Käännä valitsin asentoon POIS. The timer will keep off until the dial is turned to ON uudelleen.

Image: Shows the timer dial set to 'OFF', indicating that watering has stopped.

Huolto

• Puhdistus: Periodically check the brass inlet filter washer for debris and clean it to ensure optimal water flow.
• Akun vaihto: When the battery indicator on the LCD screen shows low power, replace the batteries promptly to avoid interruption of watering schedules.
• Talvistaminen: Before the first frost, disconnect the timer from the faucet and hose. Remove the batteries and store the timer indoors in a dry, protected area to prevent damage from freezing.

Vianetsintä

Tässä on joitain yleisiä ongelmia ja niiden ratkaisuja:

How to Reset the Valves:

If the timer's internal valves are not functioning correctly, you may need to reset them. This process involves cycling water through the timer manually to clear any obstructions or reset the mechanism.

Video: A step-by-step guide on how to reset the internal valves of the RESTMO Sprinkler Timer to ensure proper water flow.

Tekniset tiedot

• Malli: O-HT
• Materiaali: Messinki, metalli
• Sisääntulokierre: 3/4" NH (Pure Brass)
• Hose Fitting: 3/4"
• Kastelun kesto: 1-239 minuuttia
• Kastelutiheys: 1–12 tuntia tai 1–7 päivää
• Sadeviiveen vaihtoehdot: 12/24/48/72 tuntia
• Max. Virtausnopeus: 10 GPM (35 L/Min)
• Työpaine: 10-120 PSI (0.5-8.0 Bar)
• Lämpötila-alue: 38 - 120 °F (3 - 50 °C)
• Vedenpitävyysluokitus: IP54
• Virtalähde: 2 x AAA-alkaliparistoa (eivät sisälly toimitukseen)
• Tuotteen mitat: 3.94" S x 3.94" L x 1.57" K
• Tuotteen paino: 5 unssia

Takuu ja tuki

RESTMO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo websivusto. Asiakaspalvelutiimimme on käytettävissäsi auttamaan sinua kaikissa kysymyksissäsi tai huolenaiheissasi.