FNRIDS Type 2 Electric Car Charging Cable User Manual

1. Johdanto

This manual provides essential instructions for the safe and efficient use of your FNRIDS Type 2 Electric Car Charging Cable. Please read this manual thoroughly before operating the device and retain it for future reference. This charging cable is designed to provide a reliable and convenient charging solution for electric vehicles equipped with a Type 2 charging port.

2. Turvallisuusohjeet

Turvallisen käytön varmistamiseksi ja vaurioiden välttämiseksi noudata seuraavia turvaohjeita:

Always ensure the charging cable and connectors are free from damage before use. Do not use if any part is damaged.
Do not attempt to open, disassemble, or modify the charging cable or control box.
Keep the charging cable away from children and pets.
Ensure the power outlet used is properly grounded and rated for the charger's specifications (AC 1PH 230V, 16A).
Avoid submerging the control box or connectors in water, despite its IP65 rating.
Do not use the charger in explosive or flammable environments.
Disconnect the charger from the power source and the vehicle before cleaning or maintenance.
The intelligent chip provides protection against leaks, overcharging, and overheating. The cable is also IP65 waterproof, suitable for various weather conditions.

This product is certified by UKCA, CE, and TUV, ensuring compliance with relevant safety standards.

Image showing the FNRIDS charging cable's safety features including over-voltage, altage, over-current, leakage, grounding, overheating, waterproof, power-off, surge, and short-circuit protection, along with TUV, CE, and UKCA certifications.

Kuva 2.1: Yliview of the FNRIDS charging cable's comprehensive safety protections and certifications.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

1 x Electric Vehicle Charger (Type 2 Charging Cable with Control Box)
1 x Käyttöohje
1 x kannettava laukku
1 x USB Charger (Note: This item is listed in the product details but may not be directly related to the EV charger's primary function.)
2 x USB Cables (Note: These items are listed in the product details but may not be directly related to the EV charger's primary function.)
1 x Remote Control (Note: This item is listed in the product details but may not be directly related to the EV charger's primary function.)

Image showing the FNRIDS charging cable, control box, and portable bag with dimensions and key specifications like input voltage, rated power, rated current, and waterproof rating.

Kuva 3.1: Contents of the FNRIDS charging cable package, including the charger, control box, and carry bag.

4. Tuote ohiview

4.1. Tärkeimmät ominaisuudet

Tehokas lataus: Delivers 16A output current and 3.6kW rated power, offering faster charging compared to standard 10A chargers.
Yleinen yhteensopivuus: Complies with IEC 62196-2 standards, making it compatible with most Type 2 electric vehicles and plug-in hybrid cars in Europe.
Intuitive Monitoring: Features an LED indicator on the control box for real-time charging status and error identification.
Luotettava suojaus: Equipped with an intelligent chip for protection against leaks, overcharging, overheating, and is IP65 waterproof.
Verraton mukavuus: Portable design with an included carry bag allows for charging at home, office, garage, or during travel.

Image showing the FNRIDS Type 2 Electric Car Charging Cable, including the Type 2 connector, the control box, and the Schuko power plug, along with a portable carry bag.

Kuva 4.1: The FNRIDS Type 2 Electric Car Charging Cable and its components.

Image illustrating the FNRIDS Type 2 charging cable connected to an electric vehicle's charging port, highlighting its compatibility with all IEC 62196-2 EVs and PHEVs.

Kuva 4.2: The FNRIDS charging cable demonstrating universal compatibility with Type 2 electric vehicles.

Image depicting an electric car being charged by the FNRIDS cable, emphasizing 1.6 times faster charging with 3.6kW rated power and 16A output current compared to a normal 10A EV charger.

Kuva 4.3: Visual representation of the FNRIDS charging cable's efficient charging capabilities.

Image showing the FNRIDS control box on the ground with a car tire partially over it, indicating its extreme durability and ability to withstand a 1.5-ton car drive-over test.

Kuva 4.4: The FNRIDS charging cable's control box demonstrating its robust and durable construction.

Image collage showing the FNRIDS charging cable being used outdoors in rain and snow, and indoors in varying temperatures, highlighting its IP65 waterproof and dustproof rating and suitability for -25°C to +50°C environments.

Kuva 4.5: The FNRIDS charging cable's suitability for both indoor and outdoor use in various weather conditions.

5. Tekniset tiedot

Erittely	Arvo
Mallinumero	YH-0E7W-HH8M
Kaapelin pituus	8 meters (Other lengths may be available)
Tulo Voltage	AC 1PH 230V ±20%
Tulotaajuus	50 ± 3 Hz
Nimellisteho	3.6 kW
Lähtö Voltage	AC 1PH 230V ±20%
Lähtövirta	16A
Valmiustilan virrankulutus	<5W
Käyttölämpötila	-25°C - +50°C
Varastointilämpötila	-25°C - +50°C
Työkorkeus	<2000m
Suojausluokitus	IP65
Sertifikaatit	UKCA, CE, TUV, IEC 62196-2
Liittimen tyyppi	Tyyppi 2
Yhteensopivat laitteet	Electric Vehicles, Plug-in Hybrid Cars

6. Asennus

Valmistele latauskaapeli käyttöä varten seuraavasti:

Pura pakkauksesta: Carefully remove the charging cable and all accessories from the portable bag.
Tarkastaa: Visually inspect the cable, connectors, and control box for any signs of damage. Do not proceed if damage is found.
Asema: Place the control box on a stable surface or hang it securely if possible, ensuring it is not in a position where it can be driven over or damaged. Ensure the cable reaches both the power outlet and your vehicle without being stretched or creating a tripping hazard.
Liitä virtalähteeseen: Insert the Schuko power plug firmly into a compatible, properly grounded AC 230V 16A wall outlet.
Alkutarkastus: The LED indicator on the control box should illuminate blue, indicating standby mode.

7. Käyttöohjeet

Charging your electric vehicle is a simple plug-and-play process:

Valmistele ajoneuvo: Varmista, että sähköajoneuvosi on sammutettu ja latausportin kansi on auki.
Yhdistä ajoneuvoon: Firmly insert the Type 2 connector into your vehicle's charging port. Ensure it clicks into place.
Aloita lataus: Once connected, the charging process should begin automatically. The LED indicator on the control box will flash green to indicate active charging.
Näytön lataus: Observe the LED indicator for charging status. Refer to Section 8 for details on LED indications.
Täydellinen lataus: When charging is complete, the LED indicator will turn solid green.
Irrota ajoneuvosta: Safely disconnect the Type 2 connector from your vehicle's charging port. Some vehicles may require unlocking the charging port via the vehicle's controls before disconnection.
Irrota virtalähteestä: Unplug the Schuko power plug from the wall outlet.
Kauppa: Coil the cable neatly and store it in the provided portable bag in a dry, safe place.

8. LED-ilmaisinopas

The LED indicator on the control box provides visual feedback on the charging status:

Tasainen sininen valo: Indicates the charger is in standby mode, connected to power but not actively charging.
Vilkkuva vihreä valo: Indicates the charger is actively charging the vehicle.
Tasainen vihreä valo: Ilmaisee latauksen valmistumisen.
Tasainen punainen valo: Indicates an error or safety precaution. Refer to the Troubleshooting section for assistance.

Image showing the FNRIDS control box with an LED indicator and a guide explaining the different light states: Solid Blue for Standby, Flashing Green for Charging, Solid Green for Charging Finished, and Solid Red for Safety Precaution (Error).

Kuva 8.1: FNRIDS charging cable LED indicator status guide.

9. Huolto

Proper maintenance ensures the longevity and safe operation of your charging cable:

Puhdistus: Disconnect the charger from both the power source and the vehicle before cleaning. Use a soft, dry cloth to wipe down the cable, connectors, and control box. Do not use abrasive cleaners or solvents.
Varastointi: When not in use, coil the cable neatly and store it in the provided portable bag. Keep it in a dry, cool place, away from direct sunlight and extreme temperatures.
Tarkastus: Regularly inspect the cable and connectors for any signs of wear, cuts, cracks, or corrosion. If any damage is observed, discontinue use immediately and contact customer support.
Ympäristöolosuhteet: The IP65 rating allows for outdoor use, but prolonged exposure to harsh weather conditions should be minimized when possible. Ensure connectors are clean and dry before use.

10. Vianmääritys

Jos kohtaat ongelmia, katso seuraavaa vianmääritysopasta:

Ongelma	Mahdollinen syy	Ratkaisu
No LED light when plugged into power.	No power from the outlet; faulty outlet; damaged cable/control box.	Check the power outlet with another device. Try a different outlet. Inspect the cable for damage. If damaged, discontinue use.
LED shows solid red light.	Error detected (e.g., over-voltage, altage, over-current, leakage, overheating, short-circuit).	Disconnect the charger from both the vehicle and the power outlet. Wait a few minutes, then reconnect. If the error persists, contact customer support.
Charging does not start (LED remains blue).	Type 2 connector not fully inserted into vehicle; vehicle not ready to charge; vehicle charging port issue.	Ensure the Type 2 connector is firmly and correctly inserted into the vehicle's charging port. Check vehicle's dashboard or app for charging status. Try restarting the vehicle.
Lataus pysähtyy odottamatta.	Power interruption; vehicle charging fault; charger safety mechanism activated.	Check the power supply. Check vehicle for error messages. If the LED is red, refer to the 'Solid red light' solution.

For issues not covered here or if problems persist, please contact FNRIDS customer support.

11. Takuu ja tuki

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact FNRIDS customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Valmistaja: FNRIDS

Päivämäärä, kun ensimmäinen saatavilla: 25. tammikuuta 2024

FNRIDS YH-0E7W-HH8M