1. Johdanto
This manual provides detailed instructions for the installation, operation, and maintenance of your XIBANY TF-901 LCD Acceleration Instrument and DC48V 20A Intelligent Brushless Controller. This system is designed for use with electric scooters and e-bikes, offering precise control and clear display of operational parameters.
Lue tämä käyttöohje huolellisesti ennen asennusta ja käyttöä varmistaaksesi laitteen oikean toiminnan ja turvallisuuden.
Paketin sisältö:
- 1 x TF-901 LCD Acceleration Instrument
- 1 x DC48V 20A Intelligent Brushless Controller
- 1 x virtakytkin
- 1 x Set of Connection Cables
- Throttle Grips (integrated with LCD instrument)
2. Tuotteen osat yliview
Figure 1: XIBANY TF-901 LCD Instrument and Controller Kit
This image displays the complete kit, including the TF-901 LCD acceleration instrument with integrated throttle grips, the DC48V 20A intelligent brushless controller, and the necessary wiring harness. The LCD instrument provides real-time data, while the controller manages motor operation based on user input and system parameters. The various cables facilitate connection between these components and the electric scooter's power source and motor.
Tärkeimmät komponentit:
- TF-901 LCD Instrument: Displays speed, battery level, and other operational data. Integrates acceleration control.
- DC48V 20A Brushless Controller: The central processing unit that regulates power to the motor based on input from the LCD instrument and other sensors.
- Liitäntäkaapelit: A set of color-coded cables with various connectors for linking the LCD, controller, power source, motor, and other accessories.
- Virtakytkin: For turning the system on and off.
3. Asennus ja asennus
Proper installation is crucial for the safe and efficient operation of your electric scooter or e-bike. If you are unsure about any steps, it is recommended to seek assistance from a qualified technician.
Turvallisuusohjeet:
- Varmista, että ajoneuvon virta on kokonaan katkaistu ennen asennuksen aloittamista.
- Disconnect the battery to prevent accidental short circuits.
- Käytä asianmukaisia suojavarusteita, mukaan lukien käsineet ja silmäsuojaimet.
- Verify all connections are secure and correctly matched before applying power.
Asennusvaiheet:
- Mount the LCD Instrument: Securely attach the TF-901 LCD instrument (with integrated throttle grips) to the handlebars of your scooter or e-bike. Ensure it is positioned for easy viewing and comfortable access to the throttle.
- Kiinnitä ohjain: Find a suitable, protected location for the DC48V 20A brushless controller. It should be protected from moisture and physical damage. Secure it firmly.
- Connect the LCD Instrument to the Controller: Locate the 6-pin interface cable from the TF-901 LCD and connect it to the corresponding port on the brushless controller. Ensure the connection is firm and fully seated.
- Liitä virta: Connect the main power cables from the controller to your vehicle's DC48V battery. Pay close attention to polarity (positive to positive, negative to negative).
- Kytke moottori: Connect the motor phase wires and Hall sensor wires from your brushless motor to the corresponding ports on the controller. Color-matching is typically required.
- Connect Brake Signal: Connect the brake lever signal wires to the controller. This allows the controller to cut power to the motor when brakes are applied.
- Connect Power Switch: Integrate the provided power switch into the main power circuit as instructed by your vehicle's wiring diagram or the controller's specific instructions.
- Turvallinen johdotus: Route all cables neatly and secure them with cable ties to prevent them from snagging or getting damaged during operation.
4. Käyttöohjeet
Once installed, follow these steps to operate your electric scooter or e-bike with the XIBANY system.
4.1 Virta päälle/pois
- Virran kytkeminen: Press the power switch. The TF-901 LCD display should illuminate, indicating the system is active.
- Virran sammuttaminen: Press the power switch again. The LCD display will turn off, and the system will shut down.
4.2 LCD Display Functions (TF-901)
The TF-901 LCD instrument provides essential information for your ride:
- Nopeusnäyttö: Näyttää nykyisen ajonopeuden.
- Akun tason ilmaisin: Näyttää jäljellä olevan akun varauksen.
- Tilan valinta: Allows selection of different power assist levels or riding modes (if supported by the controller).
- Virhekoodit: In case of system malfunction, specific error codes may be displayed to aid in troubleshooting. Refer to the troubleshooting section for common codes.
4.3 Acceleration Control
The integrated throttle grip on the TF-901 LCD instrument controls acceleration. Gently twist the throttle to increase speed. Release the throttle to decelerate.
4.4 Brake Function
When the brake levers are engaged, the controller receives a signal to cut power to the motor, ensuring safe stopping. Ensure your brake levers are properly connected and functioning.
5. Huolto
Regular maintenance helps ensure the longevity and reliable performance of your XIBANY system.
- Tarkista liitännät: Periodically check all electrical connections for tightness and corrosion. Loose connections can lead to intermittent operation or damage.
- Pidä puhtaana ja kuivana: Ensure the LCD instrument and controller are kept clean and dry. Avoid exposure to heavy rain or direct water spray.
- Kaapelin eheys: Inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
- Ympäristönsuojelu: Avoid storing or operating the system in extreme temperatures or high humidity.
6. Vianmääritys
Tässä osiossa on ratkaisuja yleisiin ongelmiin, joita saatat kohdata.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Järjestelmä ei käynnisty. | Loose power connection, discharged battery, faulty power switch. | Check all power connections. Ensure battery is charged. Test or replace power switch. |
| Motor not responding to throttle. | Loose throttle connection, controller malfunction, motor issue. | Verify the 6-pin LCD/throttle connection to the controller. Check motor connections. If problem persists, consult a technician. |
| LCD-näyttö on tyhjä tai välkkyy. | Loose 6-pin connection, damaged LCD cable, faulty LCD unit. | Ensure the 6-pin cable between LCD and controller is securely connected. Inspect cable for damage. If necessary, replace the LCD instrument. |
| Inconsistent power delivery. | Loose motor phase wires, Hall sensor issues, controller overheating. | Check motor and Hall sensor connections. Ensure controller has adequate ventilation. |
7. Tekniset tiedot
- Voitage: DC 48V
- Nykyinen: 20A
- Näytön malli: TF-901 LCD
- Näyttöliittymä: 6-nastainen
- Ohjaimen tyyppi: Intelligent Brushless
- Materiaali: Metal (Controller housing)
- Mallin nimi: XIBANY001
- Tuotteen paino: Noin 1.76 unssia (50 grammaa)
- Paketin mitat: Noin 1.18 x 0.79 x 0.39 tuumaa
- Ikäryhmä (kuvaus): Aikuinen
8. Takuu ja tuki
Warranty information for the XIBANY TF-901 LCD Instrument and DC48V 20A Brushless Controller is typically provided at the point of purchase or can be obtained directly from the manufacturer or authorized reseller. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact XIBANY customer service through the official channels provided with your product or on the XIBANY websivusto.