Johdanto
This manual provides instructions for the proper installation, operation, and maintenance of your Leader Accessories Quick Disconnect Boat Seat Mount with Swivel. Please read these instructions carefully before use to ensure safe and efficient operation. This product is designed for universal fit on boat pedestals or flat surfaces measuring 8 inches x 9 inches.
Tuotteen komponentit
Jokainen sarja sisältää seuraavat osat:
- Quick Disconnect Seat Mount (1 unit)
- 6¼ inch Seat Swivel (1 unit)
Note: Mounting screws (1/4 UNC) are not included and must be purchased separately.
Image: Two complete sets of quick disconnect seat mounts and swivels, as included in the package.
Asennus ja asennus
- Mounting the Swivel to the Seat:
Attach the 6¼ inch seat swivel to the bottom of your boat seat using appropriate 1/4 UNC screws (not included). Ensure the swivel is centered and securely fastened. The swivel features two rows of slotted holes to accommodate most seat sizes. If necessary, remove the iron plate from the swivel, align it with your seat's bolt pattern, and then reinstall the iron plate.
Image: A hand using a screwdriver to adjust the swivel mechanism on the underside of a boat seat, demonstrating how to fit the swivel to different seat patterns.
- Mounting the Quick Disconnect Base:
Secure the quick disconnect seat mount base to your boat's pedestal or any flat 8 inch x 9 inch surface. Use appropriate 1/4 UNC screws (not included) to fasten the base firmly. Ensure the base is stable and does not wobble.
Image: The quick disconnect seat mount base displayed above various types of boat pedestals, illustrating its universal compatibility.
Image: A quick disconnect seat mount being separated from a boat pedestal, showing the detachment mechanism.
- Connecting the Seat Assembly to the Base:
Align the seat assembly (with the swivel attached) with the quick disconnect base. Slide the seat assembly onto the base until it locks securely into place. You should hear or feel a click indicating it is properly engaged.
Image: A boat seat being slid into position on the quick disconnect mount, demonstrating the connection process.
Image: A boat seat fully connected and secured to the quick disconnect mount, ready for use.
Käyttöohjeet
- Swiveling the Seat: The integrated swivel allows for 360-degree rotation. Simply turn the seat to your desired position.
- Pikakatkaisutoiminto: To remove the seat, locate the release lever on the quick disconnect mount. Engage the lever and slide the seat assembly off the base. This allows for fast and easy removal or swapping of seats.
Image: A diagram illustrating the full 360-degree rotational capability of the boat seat swivel.
Image: A diagram demonstrating the mechanism for releasing the boat seat from its quick disconnect mount.
Huolto
- Puhdistus: Clean the seat mount and swivel regularly with fresh water and a mild detergent. Rinse thoroughly and dry to prevent corrosion.
- Voitelu: Periodically apply a silicone-based lubricant to the sliding mechanism of the quick disconnect mount and the swivel to ensure smooth operation and prevent sticking.
- Kiinnittimen tarkistus: Regularly inspect all screws and fasteners for tightness. Tighten any loose fasteners to ensure the seat remains secure during use.
Vianetsintä
- Seat feels too tight while sliding: If the seat is difficult to slide onto or off the quick disconnect base, use a screwdriver to slightly loosen the screws on the mount. This can reduce friction and allow for smoother operation.
- Swivel does not fit seat bolt pattern: The swivel has two rows of slotted holes. You may need to remove the iron plate and reinstall it to align with your specific seat's bolt pattern.
- General instability: Ensure all mounting screws for both the swivel to the seat and the quick disconnect base to the pedestal/surface are securely tightened.
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | A |
| Materiaali | Seosterästä, muovia |
| Tuotteen paino (settiä kohden) | Approximately 2.13 kg (4.26 kg for 2 sets) |
| Quick Disconnect Mount Dimensions | Noin 8.8 cm P x 1.2 cm L x 8.3 cm K |
| Swivel Dimensions | Noin 6.3 cm P x 0.9 cm L x 5 cm K |
| Yhteensopivuus | All brands of pedestals or flat 8" x 9" surfaces |
| Screw Size (Recommended) | 1/4 UNC (not included) |
Image: A detailed diagram displaying the key dimensions of both the quick disconnect seat mount and the swivel.
Takuutiedot
Specific warranty details for this product are not provided in this document. For information regarding warranty coverage, please refer to the product packaging or contact Leader Accessories directly.
Asiakastuki
If you have any questions, require assistance with installation, or need to report an issue, please contact Leader Accessories customer support through their official websivustolta tai jälleenmyyjältä, jolta tuote on ostettu.