RECOIL REQ7 7-Band Car Audio Equalizer User Manual

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your RECOIL REQ7 7-Band Car Audio Parametric Graphic Equalizer. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

2. Tärkeimmät ominaisuudet

• 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer.
• Fully Adjustable -12 dB to +12 dB EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz and 16kHz).
• 2 channels of speaker level inputs & 6 channels of RCA outputs (front, rear, sub).
• Auxiliary stereo RCA input & front panel auxiliary stereo input.
• Separate level controls on front of EQ for convenience (master, sub, front/rear fader, main/auxiliary inputs).
• Exceptional 83 dB signal-to-noise performance.
• Extended frequency response from 20 Hz to 30 kHz.
• High Voltage (Max Output Voltage 7V) Premium Tiffany RCA connectors.
• ISO mounting holes and removable trim ring for custom installation.
• Includes installation brackets and hardware.

3. Turvallisuustiedot

Noudata aina seuraavia turvaohjeita asennuksen ja käytön aikana:

• Irrota ajoneuvon akun negatiivinen napa ennen sähkötöitä.
• Varmista, että kaikki johdot on vedetty ja kiinnitetty oikein vaurioiden tai oikosulkujen välttämiseksi.
• Do not operate the unit in wet conditions or expose it to excessive moisture.
• Jos olet epävarma asennusvaiheista, ota yhteyttä ammattitaitoiseen auton äänentoiston asentajaan.
• Avoid adjusting audio settings while driving to maintain focus on the road.

4. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• RECOIL REQ7 Equalizer Unit
• Asennustelineet
• Kiinnitystarvikkeet (ruuvit jne.)
• Power/Ground Wiring Harness
• Käyttöopas (tämä asiakirja)

5. Tuote ohiview

5.1 Etupaneelin säätimet

Image: Front panel of the RECOIL REQ7 equalizer, showing the seven EQ band controls, master volume, subwoofer level, fader, and auxiliary input.

• ALATASO: Adjusts the output level of the subwoofer channel.
• TILAVUUS: Master volume control for all channels.
• AUX S/W: Switch to select between Main and Auxiliary input.
• AUX IN: 3.5mm stereo jack for auxiliary audio input.
• FADER: Balances the audio output between front and rear channels.
• EQ Bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz): Seven individual rotary controls to adjust the gain (-12dB to +12dB) for specific frequency ranges.

5.2 Takapaneelin liitännät

Image: Rear panel of the RECOIL REQ7 equalizer, displaying RCA inputs (Main In, Aux In, Hi Input), RCA outputs (Front Out, Rear Out, Sub Out), and power connection.

• SUB OUT (L/R): RCA outputs for connecting to a subwoofer ampelävämpi.
• AUX IN (L/R): RCA inputs for auxiliary audio sources.
• HI INPUT (L/R): Speaker level inputs for connecting to a factory head unit without RCA outputs.
• MAIN IN (L/R): RCA inputs for the primary audio source (e.g., head unit).
• REAR OUT (L/R): RCA outputs for connecting to a rear channel ampelävämpi.
• FRONT OUT (L/R): RCA outputs for connecting to a front channel ampelävämpi.
• VIRTA: Connection terminal for power, ground, and remote turn-on wires.
• LOW PASS FREQUENCY Switch (90Hz/60Hz): Selects the low-pass crossover frequency for the subwoofer output.

6. Asennus

Proper installation is crucial for optimal performance. If you are not comfortable with car audio wiring, seek professional assistance.

6.1 Asennus

1. Choose a suitable mounting location that is dry, well-ventilated, and accessible for adjustments. The REQ7 is a 1/2 DIN size, allowing for flexible placement.
2. Use the provided mounting brackets and hardware to secure the equalizer. Ensure the unit is firmly attached to prevent vibration.
3. The removable trim ring can be used for custom installations to achieve a flush look.

6.2 Johdotusliitännät

Refer to the diagram below for typical wiring connections.

Kuva: Ylhäältä alas view of the RECOIL REQ7 equalizer, illustrating the various input and output connections for a car audio system.

• Power (RED wire): Connect to a fused +12V constant power source from the vehicle's battery.
• Maadoitus (MUSTA johto): Connect to a clean, solid chassis ground point in the vehicle. Ensure good metal-to-metal contact.
• Remote (BLUE wire): Connect to the remote turn-on output of your head unit or other switched +12V source. This turns the equalizer on/off with your audio system.
• Äänitulot:
  • RCA Inputs (MAIN IN / AUX IN): Liitä RCA-kaapelit pääyksikön esivahvistimestaamp outputs to the MAIN IN. Use AUX IN for additional RCA sources.
  • High Level Inputs (HI INPUT): If your head unit does not have RCA outputs, connect the speaker wires directly to the HI INPUT terminals.
• Audio Outputs (FRONT OUT / REAR OUT / SUB OUT): Connect RCA cables from these outputs to the corresponding inputs on your external amppelastajia.

7. Käyttöohjeet

7.1 Ensimmäinen käynnistys

1. After completing all wiring, reconnect the vehicle's negative battery terminal.
2. Turn on your head unit. The REQ7 should power on automatically via the remote wire.
3. Start with all EQ bands at their center (flat) position, master volume low, and subwoofer level low.

7.2 Ääniasetusten säätäminen

• Lähteen valinta: Käytä AUX S/W switch to toggle between the MAIN IN (RCA from head unit) and AUX IN (front panel 3.5mm or rear RCA auxiliary inputs).
• Pää-äänenvoimakkuus: Lisää hitaasti VOLUME nuppi mukavalle kuuntelutasolle.
• Subwooferin taso: Säädä ALATASO knob to blend the subwoofer output with the main speakers.
• FADER Control: Käytä FADER knob to balance the sound between the front and rear speakers.
• Tasoitus: Säädä yksilöllisesti EQ bändi controls (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6kHz, 16kHz) to fine-tune the audio frequency response to your preference. Increase (+) to boost a frequency, decrease (-) to cut it.
• Alipäästösuodatin: Käytä ALAPÄÄSTÖTAAJUUS switch on the rear panel to select the desired crossover point (60Hz or 90Hz) for the subwoofer output. This ensures only low frequencies are sent to the subwoofer.

8. Huolto

• Pidä laite puhtaana ja pölyttömänä. Käytä puhdistamiseen pehmeää, kuivaa liinaa.
• Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
• Ensure all connections remain secure over time. Periodically check wiring for any signs of wear or corrosion.

9. Vianmääritys

10. Tekniset tiedot

11. Takuu ja tuki

RECOIL products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official RECOIL websivusto. Säilytä ostokuitti ostotodistuksena.

For further assistance, you may contact RECOIL customer support through their official channels.