Installation Tester TV 456 User Manual

1. Johdanto

The Testboy TV 456 is a comprehensive installation tester designed for professional testing of electrical systems. It is capable of performing a wide range of measurements including loop resistance, mains internal resistance, short circuit current, low ohm and continuity, insulation, RCD/FI tests for various types (A, AC, B, B+, F), and RCD/FI for electric car charging stations (6mA DC). The device features a 3.5-inch TFT color display and supports standard-compliant test protocols via included software. Its robust design and intuitive interface make it an essential tool for electrical professionals.

2. Turvallisuustiedot

Always observe the following safety precautions when operating the Testboy TV 456:

• Lue ja ymmärrä kaikki ohjeet ennen käyttöä.
• Älä käytä laitetta, jos se näyttää vaurioituneelta tai ei toimi oikein.
• Ensure proper personal protective equipment (PPE) is worn, such as insulated gloves and safety glasses.
• Always disconnect power to the circuit before performing any tests that require it.
• Älä ylitä laitteen enimmäissyöttötehoa.
• Only qualified personnel should operate this equipment.
• Vältä kosketusta jännitteellisiin piireihin.

3. Tuote ohiview

The Testboy TV 456 features a user-friendly layout with a clear display and tactile buttons for easy operation.

Kuva 1: Etuosa view of the Testboy TV 456 Installation Tester. The device features a central color display, navigation buttons on the left, function buttons (MEM, COM, HLP) on the top left, and a rotary selector switch on the right for selecting measurement modes (RPE, MΩ, LINE, LOOP, RCD, V). A large red "TEST" button is prominent on the left side.

3.1. Ohjaimet ja näyttö

• Näyttö: 3.5-inch TFT color display showing measurement results, settings, and menu navigation.
• Navigointipainikkeet: Ylös, alas, vasemmalle ja oikealle -nuolet valikoiden navigointiin ja arvojen säätämiseen.
• TEST-painike: Initiates a measurement or test sequence.
• MEM-painike: Accesses memory functions to save or recall test results.
• COM Button: Communication interface for data transfer.
• HLP Button: Provides on-screen help or information.
• Pyörivä valintakytkin: Used to select different measurement functions such as RPE (Protective Earth Resistance), MΩ (Insulation Resistance), LINE (Line Voltage), LOOP (Loop Impedance), RCD (Residual Current Device), and V (Voltagja).
• Virtapainike: Kytkee laitteen päälle tai pois päältä.
• Asetukset -painike: Avaa laitteen asetukset ja määritykset.

4. Asennus

4.1. Alkulataus

Before first use, ensure the Testboy TV 456 is fully charged. Connect the provided charging column adapter to the device and a suitable power source. The battery indicator on the display will show the charging status.

4.2. Virta päälle / pois

Paina ja pidä painettuna Virtapainike (marked with a circle and vertical line) located on the top right of the device to turn it on or off. The display will illuminate upon successful power-on.

4.3. Language and Basic Settings

Upon first power-on, you may be prompted to select a language. Use the navigation buttons to select your preferred language and confirm. Further settings such as date, time, and display brightness can be adjusted via the Asetukset-painike (marked with a gear icon).

5. Käyttöohjeet

The Testboy TV 456 offers various test options. Select the desired test mode using the rotary selector switch.

5.1. Loop Resistance Measurement

1. Turn the rotary selector switch to LOOP.
2. Connect the test leads to the circuit according to the on-screen diagram.
3. Paina TESTATA -painiketta aloittaaksesi mittauksen.
4. The loop resistance value will be displayed.

5.2. Eristysvastuksen mittaus

1. Turn the rotary selector switch to MΩ.
2. Ensure the circuit is de-energized and safely isolated.
3. Connect the test leads to the conductors to be tested.
4. Paina TESTATA button. The device will apply a test voltage ja näyttävät eristysresistanssin.

5.3. RCD/FI Testing

The device supports RCD/FI testing for types A, AC, B, B+, F, and 6mA DC for EV charging stations.

1. Turn the rotary selector switch to RCD.
2. Use the navigation buttons to select the RCD type (A, AC, B, B+, F, 6mA DC) and desired test current/multiplier (e.g., x1, x5).
3. Connect the test leads to the RCD circuit.
4. Paina TESTATA button. The device will perform the test and display the tripping time and current.

5.4. Data Logging and Software

The Testboy TV 456 allows for saving test results. Press the MEM button to access memory functions. Saved data can be transferred to a computer using the COM button and the provided software (Excel platform) for generating standard-compliant test protocols.

6. Huolto

6.1. Puhdistus

Puhdista laite säännöllisesti pehmeällä, damp liinaa. Älä käytä hankaavia puhdistusaineita tai liuottimia. Varmista, että laite on sammutettu ja irrotettu kaikista virtalähteistä ennen puhdistamista.

6.2. Akun hoito

To prolong battery life, avoid fully discharging the battery frequently. Store the device in a cool, dry place when not in use for extended periods. Recharge the battery periodically if stored for a long time.

6.3. Kalibrointi

For accurate measurements, it is recommended to have the Testboy TV 456 calibrated by an authorized service center periodically, typically annually or as required by local regulations.

7. Vianmääritys

8. Tekniset tiedot

• Malli: Test Boy TV 456
• Näyttö: 3.5 tuuman TFT-värinäyttö
• Test Options: Loop resistance, mains internal resistance, short circuit current, low ohm and continuity, insulation, RCD/FI (Types A, AC, B, B+, F), RCD/FI for EV charging stations (6mA DC), TRMS voltage, rotary field, frequency, grounding.
• Mitat: Jopa 1000 mittausta
• Mitat: 10.04 x 3.74 x 5.31 tuumaa (25.5 x 9.5 x 13.5 cm)
• Paino: 7.22 puntaa (3.27 kg)
• Valmistaja: Testboy
• Alkuperämaa: Taiwan
• Ensimmäisenä saatavilla: 5. tammikuuta 2024

9. Takuu ja tuki

9.1. Takuutiedot

The Testboy TV 456 comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Testboy websivustolta löydät tarkemmat ehdot takuun kattavuudesta ja kestosta.

9.2. Tekninen tuki

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Testboy customer support. Contact information can typically be found on the manufacturer's official websivustolla tai tuotepakkauksessa.