DROK DROK-TRANSFORMER

DROK DC Buck Converter CNC (Model DROK-TRANSFORMER) Instruction Manual

Model: DROK-TRANSFORMER | Brand: DROK

Johdanto

This manual provides detailed instructions for the safe and efficient operation of your DROK DC Buck Converter CNC. This adjustable power supply regulator module is designed to convert an input voltage range of 10V-100V DC to an adjustable output voltage of 0-60V DC, with an output current of 0-12A and power up to 720W. It features constant voltage and current modes, a cooling fan, an LCD display, and multiple protection mechanisms.

Tuotteen ominaisuudet

  • Säädettävä voltage & nykyinen: Tulo Voltage: 10V-100V; Output Voltage: 0-60V; Output Current: 0-12A; Output Power: 0-720W. All parameters are arbitrarily adjustable.
  • Constant Voitage & Current Modes: The module supports both constant output voltage (CV) and constant output current (CC) settings via key buttons.
  • Tuuletin: Equipped with an integrated cooling fan to maintain optimal operating temperature, activating when output current exceeds 1.5A.
  • LCD-näyttö: Features a clear LCD color screen for real-time display of voltage, current, and power, enhancing user convenience.
  • Kattava suojaus: Includes reverse connection protection, input low voltage protection (LVP), over voltage protection (OVP), over current protection (OCP), and over power protection (OPP) for enhanced safety and durability.

Tuote loppuview

Familiarize yourself with the components of the DROK DC Buck Converter CNC:

Labeled diagram of DROK DC Buck Converter CNC showing input/output ports, fuse, fan, LCD, buttons, and rotary encoder.
Figure 1: Component Layout
Tämä kuva näyttää yläosan view of the DROK DC Buck Converter CNC with key components labeled. From left to right and top to bottom, you can identify the Input Port, Input 15A Automotive Fuse, Power Indicator LED, Fan Cooling System, LCD Display, Silicone Buttons for control, Communication Port, Output Port, and Rotary Encoder for fine adjustments.

The module's design includes clearly marked input and output terminals, a protective fuse, an active cooling fan, and an intuitive LCD interface for monitoring and control.

Tekniset tiedot

ParametriArvo
Tulo Voltage10V-100V DC
Lähtö Voltage0-60V DC
Lähtövirta0-12A
Lähtöteho0-720W
Voitage Regulation Resolution10mV
Current Regulation Resolution10mA
Voitage Näytön tarkkuus10mV
Nykyinen näytön resoluutio10mA
Fan Start-up ConditionOutput Current > 1.5A
Oikosulkusuojaus15A Automotive Fuse
Tulon suojausReverse Connection Protection, Low Voltage Protection (LVP)
LähtösuojausYli Voltage Protection (OVP), Over Current Protection (OCP), Over Power Protection (OPP)
Mitat (P × L × K)135 mm × 98 mm × 45 mm (5.31 tuumaa × 3.86 tuumaa × 1.77 tuumaa)
Tuotteen paino13.1 unssia
Image showing the dimensions of the DROK DC Buck Converter CNC: 135mm length, 98mm width, 45mm height.
Kuva 2: Tuotteen mitat
This image illustrates the physical dimensions of the buck converter module, indicating its length, width, and height for proper installation planning.

Asennus

Proper setup is crucial for safe and effective operation. Ensure all connections are secure before applying power.

  1. Virta pois: Varmista, että kaikki virtalähteet on irrotettu ennen johtojen kytkemistä.
  2. Tulojohdot: Connect your DC input power source (10V-100V) to the "IN+" and "IN-" terminals on the module. Ensure correct polarity: "IN+" for positive, "IN-" for negative. The module features reverse connection protection, but correct wiring is always recommended.
  3. Lähtöjohdot: Connect your load to the "OUT+" and "OUT-" terminals. Ensure correct polarity: "OUT+" for positive, "OUT-" for negative.
  4. Maadoitus: The module typically shares a common negative ground between input and output. Verify this for your specific application to avoid ground loops or unexpected behavior.
  5. Asennus: Secure the module in a well-ventilated area, away from conductive materials. Consider using a non-conductive enclosure if operating in an environment where accidental contact is possible.
  6. Ensimmäinen käynnistys: After all connections are verified, apply power to the input. The LCD display should illuminate, showing current voltage ja nykyiset lukemat.
Alapuoli view of the DROK DC Buck Converter CNC, showing solder points and circuit board traces.
Figure 3: Underside of the Module
Tämä kuva tarjoaa view of the circuit board's underside, which can be helpful for understanding mounting points and general layout.

Käyttöohjeet

The DROK DC Buck Converter CNC is controlled via its LCD display, silicone buttons, and rotary encoder.

Setting Output Voltage ja nykyinen

  1. Asetuksiin pääseminen: Press the "SET" button to enter the parameter setting mode. The display will show the currently adjustable parameter (e.g., output voltagja).
  2. Navigointiparametrit: Use the "SET" button to cycle through different parameters: output voltage, output current limit, and potentially other settings depending on the firmware version.
  3. Arvojen säätäminen: While a parameter is selected, turn the "Rotary Encoder" (knob) clockwise to increase the value and counter-clockwise to decrease it. Short press the rotary encoder to switch between coarse and fine adjustment modes.
  4. Asetusten vahvistaminen: Once the desired value is set, press the "OK" button (or the "SET" button again, depending on the model) to confirm and save the setting.
  5. Lähtöohjaus: Use the "ON/OFF" button to enable or disable the output. When disabled, the module may still show input voltage but will not supply power to the output terminals.

LCD-näytön ymmärtäminen

The LCD provides real-time feedback on the module's status:

  • Lähtö Voltage (V): Näyttää nykyisen voltage being supplied to the load.
  • Output Current (A): Shows the current being drawn by the load.
  • Lähtöteho (W): Indicates the total power being delivered.
  • Tulo Voltage (IN V): Näyttää voltage of the input power source.
  • Protection Indicators: May display indicators for active protections (e.g., OVP, OCP) if triggered.

The module can be programmed to output a predetermined voltage upon power-up or only when the output button is pressed. Refer to the specific on-screen menu options for configuring this behavior.

Huolto

Regular maintenance ensures the longevity and reliable performance of your buck converter.

  • Pidä puhtaana: Periodically clean the module, especially the fan and heatsink, to prevent dust buildup which can hinder cooling. Use a soft, dry brush or compressed air. Ensure power is disconnected before cleaning.
  • Tarkista liitännät: Regularly inspect all input and output wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to arcing, overheating, or unstable operation.
  • Monitorin tuulettimen toiminta: Ensure the cooling fan operates correctly when the output current exceeds 1.5A. A non-functional fan can lead to overheating and module damage.
  • Ympäristöolosuhteet: Operate the module within its specified temperature and humidity ranges. Avoid exposure to moisture, extreme temperatures, or corrosive environments.
  • Sulakkeen tarkastus: If the module fails to power on or provide output, check the 15A automotive fuse. Replace it with a fuse of the same rating if blown.

Vianetsintä

This section addresses common issues you might encounter with your DROK DC Buck Converter CNC.

OngelmaMahdollinen syy ja ratkaisu
Ei virtaa/Näyttö pois päältä
  • No input power: Verify the input power source is connected and supplying voltage 10–100 V:n alueella.
  • Palanut sulake: Check the 15A automotive fuse. Replace if necessary with a fuse of the same rating.
  • Virheellinen johdotus: Ensure input wires are connected correctly to "IN+" and "IN-".
Ei lähtöä Voltage
  • Output disabled: Press the "ON/OFF" button to enable the output.
  • Output short circuit: Disconnect the load and check for a short circuit. The OCP (Over Current Protection) may have activated.
  • Ylikuormitus: The load may be drawing more current or power than the set limits or the module's maximum capacity (12A/720W). Reduce the load or adjust settings.
  • Output protection triggered: OVP, OCP, or OPP may have activated. Check the display for error messages and resolve the underlying issue.
Lähtö Voltage/Current Unstable
  • Löysät liitännät: Tighten all input and output wiring connections.
  • Input power fluctuations: Ensure the input power source is stable.
  • Ylikuumeneminen: Check if the fan is operating. Ensure adequate ventilation around the module. If the module is hot, reduce the load.
Tuuletin ei toimi
  • Low load: The fan activates when the output current exceeds 1.5A. If the load is below this, the fan will not run. This is normal operation.
  • Fan malfunction: If the load is high (>1.5A) and the module is hot but the fan is not running, the fan may be faulty. Contact support.
Incorrect Readings on LCD
  • Calibration issue: While factory calibrated, extreme conditions or damage could affect accuracy. If persistent, contact support.
  • Measurement limitations: Ensure your external measurement tools are accurate and properly connected.

Takuu ja tuki

DROK provides a one-year service period for products purchased. If you encounter any quality issues with your DROK DC Buck Converter CNC within this period, you are eligible for a brand new replacement.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact DROK customer support through the retailer where the product was purchased or visit the official DROK websivustolta yhteystiedot.

When contacting support, please have your product model number (DROK-TRANSFORMER) and purchase details readily available.