RICOO S5011 Swivel Monitor Wall Mount

Johdanto

This manual provides detailed instructions for the safe and proper installation and operation of your RICOO S5011 Swivel Monitor Wall Mount. Please read all instructions carefully before beginning installation. Keep this manual for future reference.

Turvallisuustiedot

• Painokapasiteetti: Älä ylitä 20 kg:n (44 paunan) enimmäispainokapasiteettia. Ylikuormitus voi aiheuttaa vakavia vammoja tai tuotevaurioita.
• Näytön koko: Tämä teline on suunniteltu 13–27 tuuman näytöille.
• VESA-yhteensopivuus: Ensure your monitor has VESA mounting patterns of 75x75 mm or 100x100 mm.
• Seinän tyyppi: This mount is supplied with anchors suitable for concrete walls only. For other wall types (e.g., wood studs, drywall), consult a professional or purchase appropriate mounting hardware.
• Asennus: Improper installation may cause property damage or personal injury. If you are unsure about the installation process, seek professional assistance.
• Liikkuvat osat: Be aware of pinch points when adjusting the mount. Keep hands clear of moving parts.

Pakkauksen sisältö

Verify that all components are present and undamaged before installation. If any parts are missing or damaged, contact RICOO customer service.

• Pre-assembled monitor mount
• Wall anchors (for concrete walls only)
• Screws for monitor attachment
• Seinäruuvit
• Additional accessories (e.g., washers, spacers)

Kuva: Yliview of the RICOO S5011 monitor wall mount and its main components.

Tekniset tiedot

Kuva: Detailed dimensions of the RICOO S5011 wall mount, showing measurements for installation planning.

Asennus ja asennus

Follow these steps carefully to install your RICOO S5011 monitor wall mount.

1. Check VESA Compatibility

Before mounting, ensure your monitor has the correct VESA pattern (75x75 mm or 100x100 mm). Measure the distance between the four mounting holes on the back of your monitor.

Kuva: VESA compatibility chart indicating supported patterns (75x75, 100x100) and an illustration of correct VESA plate alignment on the monitor.

2. Mark Drilling Locations

• Determine the desired height for your monitor.
• Hold the wall plate of the mount against the wall at the desired position.
• Use a pencil to mark the drilling points through the holes on the wall plate. Use a level to ensure the marks are perfectly horizontal.

3. Drill Holes and Install Wall Plate

• Drill holes at the marked locations. The drill bit size will depend on the wall anchors provided and your wall type.
• Insert the wall anchors (provided for concrete walls) into the drilled holes.
• Attach the wall plate to the wall using the wall screws. Ensure it is securely fastened.

4. Attach Monitor to Mount

• Carefully align the VESA plate on the mount with the mounting holes on the back of your monitor.
• Use the provided monitor screws, washers, and spacers (if necessary) to securely attach the monitor to the VESA plate. Do not overtighten.

Käyttöohjeet

The RICOO S5011 mount offers flexible adjustments for optimal viewmukavuutta.

Adjusting Swivel and Tilt

• Kääntyvä: The monitor arm can swivel up to 180 degrees left or right, depending on your monitor's width and distance from the wall. Gently push the monitor to the desired angle.
• Kallistaa: The monitor can be tilted +5 degrees upwards and -12 degrees downwards. Loosen any adjustment knobs or screws if present (refer to the specific design of your pre-assembled unit), adjust the tilt, and then re-tighten to secure the position.

Kaapelin hallinta

Utilize the integrated cable clips or channels on the arm to route your monitor cables neatly. This helps maintain a clean appearance and prevents cable damage.

Kuva: Lähikuva view of the mount demonstrating its articulation points for swivel and tilt, along with cable management options.

Huolto

• Säännölliset tarkastukset: Tarkista säännöllisesti kaikki ruuvit ja liitokset varmistaaksesi, että ne ovat tiukasti kiinni.
• Puhdistus: Puhdista kiinnike pehmeällä, d:lläamp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
• Voitelu: Moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, ensure no debris is obstructing the joints.

Vianetsintä

• Näyttö ei ole vaakasuorassa: Check that the wall plate is installed horizontally using a level. Some mounts may have a fine-tuning adjustment for leveling the VESA plate; consult the specific design of your pre-assembled unit.
• Vaikeuksia säätää kääntöä/kallistusta: Ensure no cables are snagged. Check if any tension screws need to be loosened for adjustment and then re-tightened to hold the position. Do not force movement.
• Teline tuntuu epävakaalta: Immediately remove the monitor. Re-check all wall and monitor connections. Ensure the wall type is appropriate and the anchors/screws are correctly installed and tightened. Verify the monitor weight does not exceed the maximum capacity.

Takuu ja tuki

RICOO products are manufactured with quality and durability in mind. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official RICOO websivusto.