Pro-Ject VC-S3 (Model 9120122295748)

Pro-Ject VC-S3 Premium Record Cleaning Machine User Manual

Model: VC-S3 (9120122295748) | Brand: Pro-Ject

Johdanto

The Pro-Ject VC-S3 is a premium record cleaning machine designed to effectively remove dirt, dust, and static from your vinyl records, ensuring optimal playback quality and longevity. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your VC-S3 unit.

Pro-Ject VC-S3 Premium Record Cleaning Machine, angled view

Kuva: Kulmikas view of the Pro-Ject VC-S3 Premium Record Cleaning Machine, showcasing its silver finish and compact design. A record is placed on the platter with the vacuum arm positioned over it.

Tuotteen ominaisuudet

  • Superfast & super strong cleaning: Efficiently cleans records with powerful vacuum suction.
  • Completely dry record within 2 rotations: Designed for rapid drying, allowing immediate playback.
  • Big 2.5l tank for vacuumed cleaning liquid: Large capacity waste fluid tank for extended use.
  • Removes static load of vinyl records: Helps eliminate static electricity that attracts dust.
  • Removes cleaning fluid (Wash it) residue free: Ensures no residue is left on the record surface after cleaning.

Asennus

  1. Purkaminen: Carefully remove the VC-S3 unit and all accessories from its packaging. Retain packaging for future transport or storage.
  2. Sijoitus: Place the machine on a stable, level surface away from direct sunlight, heat sources, and excessive dust. Ensure adequate ventilation around the unit.
  3. Virtaliitäntä: Connect the provided power cable to the VC-S3 and then to a suitable wall outlet. Ensure the power switch is in the "Off" position before connecting.
  4. Nesteen valmistus: Prepare your record cleaning fluid according to its manufacturer's instructions. Pro-Ject recommends using their "Wash it" cleaning fluid for optimal results.
Yläosa view of Pro-Ject VC-S3 with a record on the platter

Kuva: Ylhäältä alas view of the Pro-Ject VC-S3, showing a vinyl record placed on the central spindle and the vacuum arm positioned to the right.

Käyttöohjeet

Follow these steps for effective record cleaning:

  1. Paikkatieto: Carefully place the record onto the spindle, ensuring it sits flat. Secure it with the record clamp.
  2. Apply Fluid: Apply a small amount of cleaning fluid evenly across the record surface. Use a dedicated brush (not included) to gently spread the fluid.
  3. Käynnistä moottori: Flip the "MOTOR" switch to the "I" position to start the platter rotation. Allow the fluid to work for a few rotations.
  4. Engage Vacuum: Flip the "VACUUM" switch to the "I" position to activate the vacuum suction. The vacuum arm will draw the fluid and contaminants from the record surface.
  5. Dry Record: Allow the vacuum to operate for 1-2 rotations (approximately 2 seconds) until the record surface appears dry. For heavily soiled records, a second application and vacuum cycle may be necessary.
  6. Lopeta toiminta: First, flip the "VACUUM" switch to "O", then the "MOTOR" switch to "O".
  7. Remove Record: Carefully remove the record clamp and then the cleaned record.
Close-up of the motor and vacuum switches on the Pro-Ject VC-S3

Kuva: Lähikuva view of the two toggle switches on the side of the Pro-Ject VC-S3, labeled "MOTOR" and "VACUUM", indicating their on/off positions.

Huolto

  • Tyhjä jätesäiliö: Regularly check and empty the waste fluid tank. The tank is located at the bottom of the unit. Refer to the diagram in the full manual for exact location and removal instructions. Dispose of waste fluid responsibly.
  • Clean Vacuum Arm: Periodically inspect the felt strips on the vacuum arm for wear or debris. Clean them gently with a damp cloth. Replace worn strips to maintain optimal suction.
  • Ulkopuolen puhdistus: Puhdista laitteen ulkopinta pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
  • Varastointi: When not in use for extended periods, disconnect the power and store the unit in a dry, dust-free environment.

Vianetsintä

OngelmaMahdollinen syyRatkaisu
Record not drying completely or wet streaks remain.
  • Insufficient vacuum time.
  • Worn or dirty vacuum arm felt strips.
  • Waste tank is full.
  • Record warpage preventing full contact.
  • Increase vacuum time to 2-3 rotations.
  • Clean or replace felt strips.
  • Empty the waste tank.
  • Ensure record is as flat as possible; apply gentle pressure to the vacuum arm if necessary (with caution).
Kone ei käynnisty.
  • Virtajohtoa ei ole kytketty.
  • Ei virtaa pistorasiasta.
  • Tarkista virtajohdon liitäntä laitteeseen ja pistorasiaan.
  • Testaa pistorasiaa toisella laitteella.
Motor or vacuum not engaging.
  • Switches not fully engaged.
  • Sisäinen vika.
  • Ensure switches are firmly in the "I" position.
  • Jos ongelma jatkuu, ota yhteyttä asiakastukeen.

Tekniset tiedot

  • Mallin nimi: VC-S3
  • Tuotteen mallinumero: 9120122295748
  • Merkki: Pro-Ject
  • Väri: Hopea
  • Tuotteen mitat: 20 x 18 x 18 tuumaa (pituus x leveys x korkeus)
  • Tuotteen paino: 19.41 kiloa
  • Virtalähde: Johdollinen sähkö
  • Jätesäiliön tilavuus: 2.5 litraa (noin)

Takuu ja tuki

Specific warranty terms and detailed support contact information are not provided in this document. For warranty claims, technical support, or service inquiries, please refer to the official Pro-Ject Audio Systems websivustolta tai ota yhteyttä valtuutettuun jälleenmyyjään. Säilytä ostokuitti takuun voimassaoloa varten.

You can visit the official Pro-Ject store on Amazon for more information: Pro-Ject Audio Systems Store

© 2024 Pro-Ject Audio Systems. Kaikki oikeudet pidätetään.

Tämä käyttöohje on tarkoitettu vain tiedoksi. Tekniset tiedot voivat muuttua ilman erillistä ilmoitusta.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.