Jectse 4G LTE USB WiFi Modem Router Instruction Manual

1. Johdanto

This manual provides detailed instructions for the Jectse 4G LTE USB WiFi Modem Router. This device allows you to establish a portable Wi-Fi hotspot using a 3G or 4G SIM card, or function as a USB modem when connected to a computer. It supports up to 10 users simultaneously and offers a data transfer rate of 300 Mbps.

2. Tuotteen tekniset tiedot

• Tuotteen materiaali: ABS
• Väri: Valkoinen
• SIM-korttipaikka: Standard SIM card slot (SIM card not included)
• 4G LTE-FDD Bands: B1/B3/B5/B7/B8/B20
• 4G LTE-TDD Bands: 38/39/40/41
• 3G WCDMA -taajuusalueet: B1/B2/B5/B8
• GSM-taajuudet: 900/1800/1900/850
• Wi-Fi-standardi: 802.11 b/g/n
• Langaton standardi: IEEE802.11b/g/n
• Sharing Capacity: Jopa 10 käyttäjää
• Tiedonsiirtonopeus: 300 Mbps
• Effective WiFi Distance: Jopa 10 metriä
• Yhteystekniikka: USB, Wi-Fi
• Yhteensopivat laitteet: Smartphone, tablet, personal computer
• Tuetut käyttöjärjestelmät: Win 2000/2003/XP/Vista/7/8/10 (32/64-bit), OS 10.4 or higher, Linux

3. Pakkauksen sisältö

Tarkista pakkauksesta seuraavat tuotteet:

• 1 x Jectse Mobile Router
• 1 x Käyttöohje

4. Asennusohjeet

4.1. SIM-kortin asettaminen

The Jectse 4G LTE USB WiFi Modem Router requires a standard 3G or 4G SIM card to function as a mobile hotspot.

1. Irrota laitteen takakansi varovasti.
2. Etsi vakiomallinen SIM-korttipaikka.
3. Insert your activated standard SIM card into the slot, ensuring correct orientation.
4. Aseta takakansi takaisin paikalleen.

Image: The Jectse 4G LTE USB WiFi Modem Router with its back cover removed, revealing the internal components and the standard SIM card slot. The device is white and red.

4.2. Ensimmäinen yhteys

The device can be powered via a USB port.

1. Connect the Jectse 4G LTE USB WiFi Modem Router to any standard USB port (e.g., computer, USB wall adapter, car USB port).
2. Laite käynnistyy automaattisesti.

Image: The Jectse 4G LTE USB WiFi Modem Router, a white and red USB stick, with its USB connector visible, ready to be plugged into a port.

4.3. APN Configuration (If Necessary)

Even if your SIM card is compatible, it may not be plug-and-play and you might need to disable the SIM card's PIN and configure the Access Point Name (APN) settings. This is typically done through the device's web käyttöliittymä.

• Connect your computer or mobile device to the router's Wi-Fi network (SSID and password are usually printed on the device or its packaging).
• Avaa a web browser and enter the router's IP address (e.g., 192.168.100.1, often printed on the device).
• Log in using the default username and password (e.g., admin/admin, often printed on the device).
• Navigate to the network settings or APN settings section.
• Enter the correct APN details provided by your mobile network operator.
• Tallenna asetukset ja käynnistä laite uudelleen, jos sitä pyydetään.

5. Käyttöohjeet

5.1. Using as a WiFi Hotspot

Once powered on with an active SIM card and correct APN settings, the device will broadcast a Wi-Fi signal.

1. On your smartphone, tablet, or laptop, search for available Wi-Fi networks.
2. Select the network name (SSID) corresponding to your Jectse router. The SSID and Wi-Fi key are typically printed on the device itself.
3. Enter the Wi-Fi key (password) to connect.
4. Up to 10 devices can connect simultaneously to the hotspot.

Image: The Jectse 4G LTE USB WiFi Modem Router shown in an outdoor setting, illustrating its portability and use for multiple users in various scenarios like travel or gatherings.

5.2. Using as a USB Modem

When connected to a computer's USB port, the device can also function as a direct USB modem, providing internet access to that computer.

1. Connect the Jectse router to an available USB port on your computer.
2. The computer should automatically detect the device and install necessary drivers. If not, refer to the troubleshooting section.
3. Once drivers are installed, the computer will establish an internet connection via the modem.

Image: A person using a laptop outdoors, with the Jectse 4G LTE USB WiFi Modem Router connected, demonstrating its use for mobile work or streaming.

6. Huolto

To ensure optimal performance and longevity of your Jectse 4G LTE USB WiFi Modem Router, follow these general maintenance guidelines:

• Pidä laite puhtaana ja pölyttömänä. Käytä puhdistamiseen pehmeää, kuivaa liinaa.
• Vältä altistamasta laitetta äärimmäisille lämpötiloille, suoralle auringonvalolle tai korkealle kosteudelle.
• Älä pudota laitetta tai kohdista siihen voimakkaita iskuja.
• Säilytä laitetta viileässä, kuivassa paikassa, kun sitä ei käytetä.

7. Vianmääritys

If you encounter issues with your Jectse 4G LTE USB WiFi Modem Router, refer to the following common solutions:

7.1. Ei Internet-yhteyttä

• Tarkista SIM-kortti: Varmista, että SIM-kortti on asetettu oikein ja että se on aktivoitu datapaketilla.
• APN-asetukset: Verify that the APN settings are correctly configured for your mobile network operator (refer to Section 4.3).
• SIM-kortin PIN-koodi: If your SIM card has a PIN, ensure it is disabled. This can usually be done by inserting the SIM into a smartphone and disabling the PIN lock in its settings.
• Signaalin voimakkuus: Check the signal indicator on the device. If the signal is weak or absent, move to an area with better network coverage.
• Käynnistä laite uudelleen: Disconnect and reconnect the device from the USB port to restart it.

7.2. Device Not Recognized as USB Modem

• Ohjaimen asennus: Ensure that your computer's antivirus software or firewall is not blocking the installation of USB modem drivers. Temporarily disable them if necessary and try reconnecting the device.
• USB-portti: Kokeile kytkeä laite tietokoneesi toiseen USB-porttiin.
• Käyttöjärjestelmän yhteensopivuus: Verify that your operating system is supported (Win 2000/2003/XP/Vista/7/8/10, OS 10.4+, Linux).

Kuva: Lähikuva view of the Jectse 4G LTE USB WiFi Modem Router, highlighting the signal and Wi-Fi indicator lights, which provide status information.

8. Takuu ja tuki

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Jectse customer service. Specific details regarding spare parts availability and software updates are not provided in this manual.