Johdanto
Thank you for choosing the WORKPRO LED Work Light (Model W130016A). This versatile and durable work light is designed to provide bright, reliable illumination for a wide range of tasks and environments. Featuring multiple light modes, a rotatable stand, strong magnetic base, and power bank functionality, it is an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: WORKPRO LED Work Light (Model W130016A)
Tuotteen ominaisuudet
- Neljä valotilaa: High, Medium, Low, and Flashing modes to suit various lighting requirements.
- 180° kääntyvä jalusta: Adjustable stand with 7 locking positions allows for precise light angle adjustment.
- Rechargeable & Power Bank Function: Equipped with two built-in 3.7V, 2000mAh batteries. Features a Type-C input for charging the light and a USB-A output to function as a power bank for other devices.
- Vahva magneettinen pohja: Four N42 magnets on the back allow secure attachment to metal surfaces, providing hands-free operation.
- Kestävä rakenne: Made from Acrylonitrile Butadiene Styrene (ABS) and metal with TPR soft rubber for corrosion, wear, and impact resistance.
- Vedenpitävä ja iskunkestävä: Designed to withstand challenging environments, passing high and low temperature tests.
Kuva 2: Keskeiset ominaisuudetview
Asennus ja lataus
Alkuveloitus
Before first use, fully charge the WORKPRO LED Work Light. Connect the provided Type-C charging cable to the light's input port and to a compatible USB power adapter (not included). The charging indicator light will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.
Power Bank -toiminto
To use the work light as a power bank, open the protective cover on the back of the light. Connect your device's charging cable to the USB-A output port on the work light. The output indicator light will show blue when charging an external device.
Figure 3: Charging Ports and Power Bank Function
Figure 4: Power Bank in Use
Käyttöohjeet
Virta päälle/pois ja tilan valinta
Locate the power button on the back of the work light. Press the button once to turn the light on to the High brightness mode. Subsequent presses will cycle through the modes in the following order: High > Medium > Low > Flashing. To turn the light off, press and hold the power button for 2 seconds, or cycle through all modes until the light turns off.
Figure 5: Light Modes and Operation
Adjusting the Stand and Magnetic Mounting
The integrated stand can be rotated 180° and features 7 adjustable locking positions. Adjust the stand to direct the light as needed. For hands-free use, utilize the four N42 magnets on the back of the light to attach it securely to any metal surface.
Kuva 6: Säädettävä kiinnike
Figure 7: Magnetic Mounting in Use
Huolto
- Puhdistus: Pyyhi valo pehmeällä, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Varastointi: Store the light in a cool, dry place away from direct sunlight when not in use for extended periods. Ensure the protective cover for the charging ports is securely closed.
- Akun hoito: Akun käyttöiän pidentämiseksi vältä akun usein tapahtuvaa täydellistä tyhjentymistä. Lataa valo säännöllisesti, vaikka sitä ei käytettäisikään aktiivisesti.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty. | Akun heikkous tai virtapainikkeen ongelma. | Charge the light fully. Ensure the power button is pressed correctly. |
| Valoteho on himmeä. | Akku vähissä tai väärä tila. | Recharge the light. Cycle through modes to select a brighter setting. |
| Ulkoista laitetta ei voi ladata. | Työvalon paristo on vähissä tai johdossa on ongelma. | Varmista, että työvalossa on riittävästi virtaa. Kokeile toista USB-kaapelia. |
Jos ongelmat jatkuvat, ota yhteyttä asiakastukeen.
Tekniset tiedot
- Malli: W130016A
- Valon lähde: COB LED
- Kirkkaus: Up to 2000 Lumens (High Mode)
- Valotilat: Korkea, Keskitaso, Matala, Vilkkuu
- Akku: 2 x 3.7V, 2000mAh Lithium-Ion (4000mAh total)
- Tulolatausportti: Type-C (5V, 2A)
- Lähtölatausportti: USB-A (5V, 1A)
- Työajat: High: 2 hours, Medium: 3 hours, Low: 8 hours
- Materiaali: Akryylinitriilibutadieenistyreeni (ABS), metalli
- Erikoisominaisuudet: 180° Rotatable Stand, 4 N42 Magnets, Waterproof, Shockproof
- Valmistaja: HANGZHOU GREATSTAR INDUSTRIAL CO. LTD
- UPC: 820909691396
Virallinen tuotevideo
Video: Perfect Work Lights for Every Job (Duration: 1:44). This video demonstrates the features and versatility of the WORKPRO LED Work Light in various scenarios.
Takuu ja tuki
For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.