WORKPRO W125235

WORKPRO 3.6V akkukäyttöisen kuumaliimapistoolin käyttöohje

Malli: W125235

Johdanto

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Turvallisuustiedot

Always keep the glue gun away from children.
Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
Varmista, että työskentelyalue on hyvin tuuletettu.
Do not leave the hot glue gun unattended when it is powered on.
Unplug or power off the glue gun when not in use or before performing any maintenance.
Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Allow the equipment to cool down completely before packing it away.
This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Pakkauksen sisältö

Tarkista pakkauksen sisältö varmistaaksesi, että kaikki osat ovat mukana ja vahingoittumattomia:

1 x WORKPRO 3.6V Cordless Hot Glue Gun
20 x Mini Glue Sticks (0.27" Dia)
1 x Type-C latauskaapeli
1 x Käyttöohje (tämä asiakirja)

WORKPRO Cordless Hot Glue Gun and included accessories — Image: The WORKPRO Cordless Hot Glue Gun shown with its included accessories, including the Type-C charging cable and a bundle of 20 mini glue sticks.

Tuote loppuview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

WORKPRO-johdottoman kuumaliimapistoolin kaavio merkityillä osilla — Image: A detailed diagram of the WORKPRO Cordless Hot Glue Gun, highlighting key components such as the nozzle, ON/OFF switch, glue stick entry, LED indicator, trigger lever, Type-C cable, retractable stand-up base, and Type-C charging port.

Suutin: Annostelee sulanutta liimaa.
On / off kytkin: Käynnistää ja sammuttaa laitteen.
Glue Stick Entry: Where glue sticks are inserted.
LED-ilmaisin: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
Liipaisinvipu: Aktivoi liiman annostelun.
Type-C latausportti: Latauskaapelin kytkemistä varten.
Sisäänvedettävä seisoma-alusta: Provides stability when the gun is not in use.

Asennus

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

Locate the Type-C charging port on the glue gun.
Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
LED-merkkivalo palaa punaisena latauksen aikana ja muuttuu vihreäksi, kun se on ladattu täyteen.

WORKPRO Cordless Hot Glue Gun charging via USB-C — Image: The WORKPRO Cordless Hot Glue Gun connected via its Type-C cable to a laptop for charging, demonstrating its USB rechargeable capability. The LED indicator shows the charging status.

Käyttöohjeet

Follow these steps to operate your hot glue gun:

Aseta liimapuikko: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
Virta päälle: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
Esilämmitys: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
Levitä liimaa: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
Automaattinen sammutus: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

WORKPRO Cordless Hot Glue Gun heating up with red LED indicator — Image: The WORKPRO Cordless Hot Glue Gun with its red LED indicator illuminated, signifying that it is in the process of heating up. A timer on the image shows "90S" for the fast preheating time.

Four-step instruction guide for using the WORKPRO Cordless Hot Glue Gun — Image: A visual guide demonstrating the four main steps of using the glue gun: 1) Inserting the glue stick, 2) Pressing the ON/OFF switch, 3) Waiting for the LED to turn green after 90 seconds of preheating, and 4) Pulling the trigger to dispense glue.

Tärkeitä huomautuksia:

Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
Sammuta laite ja anna sen jäähtyä kokonaan ennen kuin pakkaat sen pois.
The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Comparison of glue output from WORKPRO glue gun versus ordinary glue gun — Image: A side-by-side comparison illustrating the superior glue output and clarity of the WORKPRO glue gun (left) compared to an ordinary glue gun (right). The WORKPRO gun shows a consistent, clear glue flow at 0.14 oz/minute, while the ordinary gun shows a less controlled, drippy output at 0.07 oz/minute.

Huolto

Puhdistus: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
Suuttimen hoito: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
Varastointi: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
Akun hoito: Akun optimaalisen käyttöiän saavuttamiseksi vältä akun usein tapahtuvaa täydellistä purkamista. Lataa se säännöllisesti, vaikka et käyttäisi sitä jatkuvasti.

Vianetsintä

Ongelma	Mahdollinen syy	Ratkaisu
Liimapistooli ei kuumene.	Akku on vähissä tai tyhjä. Power switch not pressed correctly.	Lataa liimapistooli täyteen. Press and hold the ON/OFF switch for 3 seconds until the LED lights up.
No glue dispenses when trigger is pulled.	Glue gun not hot enough. Glue stick not fully inserted or jammed.	Odota, että LED-merkkivalo muuttuu vihreäksi. Ensure glue stick is fully inserted. Do not force it.
Glue drips excessively from nozzle.	Normal during heating/cooling. Incorrect glue stick size.	Place the gun on its stand. Use only 0.27" diameter glue sticks.
LED-merkkivalo pysyy punaisena.	Still heating up. Lataus käynnissä.	Wait for approximately 90 seconds for it to turn green. Wait for charging to complete (LED turns green).

Tekniset tiedot

Ominaisuus	Yksityiskohta
Merkki	WORKPRO
Mallinumero	W125235
Virtalähde	Akkukäyttöinen (litiumioni)
Voitage	3.6 volttia
Wattage	9 wattia
Akun kapasiteetti	2500 mAh
Lataustulo	5 V 1 A (tyyppi C)
Esilämmitysaika	Noin 90 sekuntia
Glue Output Speed	0.14 oz / min
Yhteensopiva liimapuikon halkaisija	0.27 inches (Mini Sticks)
Automaattinen sammutus	8 minuuttia käyttämättömyyttä
Tuotteen paino	1.1 kiloa
Pakkauksen mitat	8.11 x 7.52 x 2.13 tuumaa
Alkuperämaa	Kiina
Yhteensopiva materiaali	Wood, Ceramic, Metal, Stone

Takuu ja tuki

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: WORKPRO-myymälä

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.