Dr. Senst YK-80B

Dr. Senst Pulsoximeter YK-80B User Manual

Malli: YK-80B

1. Johdanto

The Dr. Senst Pulsoximeter YK-80B is a portable, non-invasive device intended for spot-checking of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate (PR) in adults and pediatric patients at home or in medical facilities. It is designed for ease of use and provides quick, reliable measurements.

Dr. Senst Pulsoximeter YK-80B

Figure 1: Dr. Senst Pulsoximeter YK-80B. This image shows the compact, white and black design of the pulse oximeter with its digital display showing readings.

2. Turvallisuustiedot

Lue kaikki turvallisuustiedot huolellisesti ennen laitteen käyttöä.

  • Älä käytä pulssioksimetriä MRI- tai CT-ympäristössä.
  • Do not use the device in situations requiring continuous monitoring.
  • Keep the device away from young children. Small parts may pose a choking hazard.
  • Avoid exposing the device to direct sunlight, high temperatures, or moisture.
  • Älä käytä laitetta, jos se vaikuttaa vaurioituneelta.
  • Consult a medical professional for interpretation of results. This device is for informational purposes and not a substitute for medical advice.

3. Tuote ohiview

Familiarize yourself with the components of your Dr. Senst Pulsoximeter YK-80B.

Dr. Senst Pulsoximeter YK-80B labeled components

Figure 2: Labeled components of the Dr. Senst Pulsoximeter YK-80B. This image highlights the OLED-Display, Power/Mode Button, Battery Compartment Cover, and Finger Opening.

Dr. Senst Pulsoximeter YK-80B display and dimensions

Figure 3: Display elements and dimensions of the Dr. Senst Pulsoximeter YK-80B. This image shows the device's compact size (58mm x 32mm) and points out the Oxygen Saturation (SpO2), Perfusion Index (PI), and Pulse Rate (PR) indicators on the display.

Tärkeimmät komponentit:

  • OLED-Display: Shows SpO2, Pulse Rate, Perfusion Index (PI), and battery level.
  • Virta / tila-painike: Used to turn the device on/off and change display modes.
  • Finger Opening: Where the finger is inserted for measurement.
  • Akkulokero: Located at the back for battery insertion.

4. Asennus

Akun asennus:

The device requires 2 AAA batteries (included).

  1. Avaa laitteen takana oleva paristolokeron kansi.
  2. Insert the two AAA batteries according to the polarity indicators (+/-) inside the compartment.
  3. Sulje paristolokeron kansi kunnolla.

5. Käyttöohjeet

Mittauksen ottaminen:

  1. Ensure your finger is clean and free of nail polish or artificial nails.
  2. Avaa clamp pulssioksimetristä.
  3. Insert one of your fingers (preferably the index or middle finger) into the finger opening until it touches the stop.
  4. Vapauta clamp, ensuring the finger is comfortably in place.
  5. Press the Power/Mode button to turn on the device.
  6. Keep your hand still during the measurement. Readings will appear on the display within a few seconds.
  7. The device will automatically turn off after approximately 8 seconds of inactivity.
Hand using Dr. Senst Pulsoximeter for quick results

Figure 4: Demonstrating quick and reliable results. This image shows a hand with the pulse oximeter attached to a finger, indicating ease of use for obtaining readings.

Precise and painless measurement with Dr. Senst Pulsoximeter

Figure 5: Illustrating precise and painless measurement. This image shows a person's hand with the pulse oximeter on a finger, emphasizing the comfortable and accurate measurement process.

Dr. Senst Pulsoximeter for home or workplace use

Figure 6: Ideal for measurement at home or in the workplace. This image depicts the pulse oximeter being used in both a home setting (on a bed) and a desk setting, highlighting its versatility.

Näytä tiedot:

  • SpO2 (%): Oxygen Saturation level. Normal range is typically 95-100%.
  • PR (bpm): Syke lyönteinä minuutissa.
  • PI (%): Perfusion Index, indicating the strength of the pulse signal.
  • Pariston ilmaisin: Näyttää jäljellä olevan akunkeston.

6. Huolto

Puhdistus:

  • Clean the surface of the device with a soft cloth dampdesinfiointiaineella (esim. 70-prosenttisella isopropyylialkoholilla).
  • Älä upota laitetta veteen tai mihinkään puhdistusliuokseen.
  • Varmista, että laite on täysin kuiva ennen uudelleenkäyttöä.

Varastointi:

  • Säilytä laitetta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
  • Jos laitetta ei käytetä pitkään aikaan, poista paristot vuotojen estämiseksi.

7. Vianmääritys

OngelmaMahdollinen syyRatkaisu
Laite ei käynnistyHeikot tai tyhjät paristot; Paristojen virheellinen asennusVaihda paristot; Tarkista paristojen napaisuus
Epätarkkoja lukemiaFinger not inserted correctly; Movement during measurement; Nail polish/artificial nails; Cold fingersReinsert finger; Remain still; Remove nail polish; Warm hands
Display shows "---

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.