Fishman AFX AcoustiVerb Reverb Pedal User Manual

1. Johdanto

The Fishman AFX AcoustiVerb is a compact reverb pedal designed specifically for acoustic instruments. It integrates three distinct reverb types (Hall, Plate, Spring) with Fishman's unique blending and voicing architecture, ensuring your acoustic tone is preserved while adding rich spatial effects. This manual provides essential information for the proper setup, operation, and maintenance of your AcoustiVerb pedal.

2. Asennus

Follow these steps to connect your AcoustiVerb pedal to your acoustic instrument and ampnostin tai PA-järjestelmä.

2.1 Virtaliitäntä

The AcoustiVerb pedal requires a 9V DC power supply (center negative, 50mA minimum). Connect the power supply to the 9V DC input jack located on the rear of the pedal.

Kuva: Takaosa view of the pedal, highlighting the 9V DC power input and the True/Buffer bypass switches.

2.2 Instrument and Ampkestävämpiä yhteyksiä

1. Connect your acoustic instrument (e.g., guitar, mandolin) to the IN polkimen oikealla puolella olevaan liittimeen tavallisella 6,3 mm:n instrumenttikaapelilla.


Image: Right side of the pedal with the 1/4-inch IN jack.

2. Yhdistä OUT polkimen vasemmalla puolella oleva tunkki omaan amplifier, mixer, or PA system using another standard 1/4-inch instrument cable.

Image: Left side of the pedal with the 1/4-inch OUT jack.

2.3 Bypass Mode Selection

The AcoustiVerb offers two bypass modes: True Bypass and Buffered Bypass. Use the small switch on the rear of the pedal to select your preferred mode.

• Todellinen ohitus: When the effect is off, your signal passes directly through the pedal without any electronic interference. This is ideal for maintaining signal integrity when using multiple pedals.
• Puskuroitu ohitus: When the effect is off, a high-quality buffer circuit maintains signal strength over long cable runs, preventing tone loss.

3. Käyttöohjeet

The AcoustiVerb pedal features intuitive controls for shaping your reverb sound.

Kuva: Yläosa view of the AcoustiVerb pedal with all controls labeled.

3.1 Säätimet

• Taso: This knob controls the overall volume of the reverb effect blended with your dry signal. Turn clockwise to increase the reverb level.
• Sävy: This knob adjusts the tonal character of the reverb effect. It only affects the reverb sound, not your instrument's dry tone. Turn clockwise for brighter reverb, counter-clockwise for darker reverb.
• Hajoamisaika: This knob determines how long the reverb effect sustains. Turn clockwise for longer, more expansive reverb tails, and counter-clockwise for shorter, more subtle reverbs.
• Reverb Type Switch: This three-position switch allows you to select between three distinct reverb algorithms:
  • Kevät: Emulates the classic sound of a spring reverb tank, often found in vintage amppelastajia.
  • Sali: Simulates the natural reverberation of a large concert hall, providing a spacious and ambient sound.
  • Levy: Recreates the smooth, dense decay of a plate reverb, known for its rich and shimmering qualities.
• Jalkakytkin: Engages or bypasses the reverb effect. The LED indicator above the footswitch illuminates when the effect is active.

4. Huolto

Proper care will ensure the longevity and optimal performance of your AcoustiVerb pedal.

• Puhdistus: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish and controls.
• Varastointi: Store the pedal in a cool, dry environment away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
• Virtalähde: Always use a compatible 9V DC (center negative) power supply. Using an incorrect power supply can damage the unit and void the warranty.

5. Vianmääritys

If you encounter issues with your AcoustiVerb pedal, refer to the following common troubleshooting steps.

• Ei ääntä:
  • Varmista, että virtalähde on kytketty oikein ja toimii.
  • Tarkista kaikkien instrumenttikaapelien oikea liitäntä ja eheys. Kokeile vaihtaa kaapelit.
  • Varmista, että instrumenttisi ja amplifier are working correctly independently of the pedal.
  • Ensure the pedal's footswitch is engaged (LED illuminated).
• Huono äänenlaatu / Kohina:
  • Tarkista löysät kaapeliliitännät.
  • Ensure you are using a regulated 9V DC power supply. Unregulated power supplies can introduce noise.
  • Experiment with the Tone knob to adjust the reverb's frequency response.
  • If using multiple pedals, ensure proper grounding and power isolation to prevent ground loops.
• Vaikutus ei kiinnosta:
  • Varmista, että virtalähde on kytketty ja että se antaa virtaa.
  • Press the footswitch firmly. The LED should illuminate when the effect is active.

If these steps do not resolve the issue, please contact Fishman customer support.

6. Tekniset tiedot

7. Takuu ja tuki

7.1 Takuutiedot

The Fishman AFX AcoustiVerb Reverb Pedal is covered by a 1 vuoden rajoitettu takuu from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper power supply usage. Please retain your proof of purchase for warranty claims.

7.2 Asiakastuki

For technical assistance, warranty service, or general inquiries, please visit the official Fishman website or contact their customer support department. Contact information can typically be found on the Fishman websivuston tukiosio.