AXIS Q6225-LE PTZ -kameran käyttöopas

1. Johdanto

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS Q6225-LE PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This camera is designed for robust outdoor surveillance in challenging conditions.

2. Turvallisuustiedot

Noudata seuraavia turvaohjeita tuotteen vahingoittumisen tai henkilövahinkojen välttämiseksi:

• Asennus: Installation must be performed by qualified personnel in accordance with all local and national electrical and building codes.
• Virtalähde: Use only the specified power supply (60 watts) for this device. Ensure the power source is stable and meets the camera's requirements.
• Ympäristö: The camera is designed for outdoor use. However, avoid exposing it to extreme conditions beyond its specified operating range.
• Puhdistus: Katkaise virta ennen puhdistamista. Käytä pehmeää, kuivaa liinaa. Älä käytä nestemäisiä tai aerosolipuhdistusaineita.
• Muutokset: Do not attempt to modify or disassemble the camera. This may void the warranty and pose safety risks.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• AXIS Q6225-LE PTZ -kamera
• Asennusopas
• Kiinnike ja laitteisto
• Network Cable Connector
• Dokumentaatio- ja ohjelmisto-CD (jos sovellettavissa)

Kuva 1: AXIS Q6225-LE PTZ Camera. This image displays the grey-colored PTZ camera unit, highlighting its robust housing and integrated lens system, designed for outdoor surveillance.

4. Asennus ja asennus

4.1 Kameran asennus

The AXIS Q6225-LE is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions.

1. Valitse sopiva asennuspaikka, joka tarjoaa halutun kuvakentän view ja on sähkö- ja verkkoyhteyksien ulottuvilla.
2. Käytä mukana toimitettua kiinnitysmallia porareikien merkitsemiseen seinään.
3. Drill pilot holes and secure the mounting bracket using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly locked in place.

4.2 Virta- ja verkkoyhteys

Connect the camera to power and network as follows:

• Teho: Connect the power cable to a 60-watt power source. Ensure the connection is secure and weatherproof.
• Verkko: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera supports Wi-Fi for wireless communication. Refer to the network configuration section for wireless setup.

4.3 Alkukokoonpano

Kun olet fyysisesti asentanut ja kytkenyt laitteet, avaa kameran web interface for initial configuration:

1. Avaa a web browser on a computer connected to the same network as the camera.
2. Enter the camera's IP address in the browser's address bar. If the IP address is unknown, use the AXIS IP Utility tool to discover it.
3. Follow the on-screen prompts to set up a new password for the administrator account.
4. Configure basic network settings, date/time, and video stream settings.

5. Kameran käyttö

5.1 Panoroinnin, kallistuksen ja zoomauksen (PTZ) ohjaus

The AXIS Q6225-LE camera features full PTZ capabilities, allowing remote adjustment of its viewing angle and zoom level. Control is typically performed via the camera's web käyttöliittymä tai yhteensopiva videonhallintaohjelmisto (VMS).

• Panoroida: Rotate the camera horizontally to cover a wider area.
• Kallistaa: Adjust the camera vertically to view objects at different heights.
• Optinen zoom: Use the optical zoom feature to magnify distant objects without loss of image quality.

5.2 Liiketunnistus ja hälytykset

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings in the web interface to trigger recordings or notifications when movement is detected.

5.3 Infrared (IR) Illumination

Equipped with infrared light sources, the camera provides clear video surveillance in low-light or complete darkness. IR illumination activates automatically or can be manually controlled.

6. Huolto

6.1 Puhdistus

Regular cleaning of the camera lens and housing is recommended to ensure optimal performance, especially in dusty or harsh environments.

• Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Puhdista kameran kotelo mainoksellaamp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.

6.2 laiteohjelmistopäivitystä

Tarkista Axis Communications säännöllisesti website for firmware updates. Keeping the camera's firmware up-to-date ensures access to the latest features, security enhancements, and bug fixes.

7. Vianmääritys

This section addresses common issues you might encounter with your AXIS Q6225-LE camera.

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information and technical support, please refer to the official Axis Communications websivustolta tai ota yhteyttä valtuutettuun jälleenmyyjään. Säilytä ostokuitti ostotodistuksena.

Verkkoresurssit: www.axis.com