Stayer 36V L20 Cordless Brush Cutter

1. Johdanto

This manual provides essential information for the safe and effective use of your Stayer 36V L20 Cordless Brush Cutter. Please read these instructions carefully before operating the tool to ensure proper assembly, operation, and maintenance. Keep this manual for future reference.

Yleiset turvallisuusvaroitukset

• Käytä aina asianmukaisia ​​henkilönsuojaimia, kuten silmäsuojaimia, kuulonsuojaimia, käsineitä ja tukevia jalkineita.
• Varmista, että työalueella ei ole sivullisia, lapsia eikä lemmikkejä.
• Inspect the tool for any damage or loose parts before each use. Do not operate a damaged tool.
• Irrota akkupakkaus, kun sitä ei käytetä, ennen puhdistusta tai huoltoa varten.
• Do not operate the brush cutter in wet conditions or in the presence of flammable liquids or gases.

2. Tuote ohiview

The Stayer 36V L20 is a powerful cordless brush cutter designed for trimming grass, weeds, and light brush. It features a brushless motor for efficiency and durability, powered by two 18V Li-ion batteries for a total of 36V.

Figure 1: Stayer 36V L20 Cordless Brush Cutter. Key components include the dual battery insertion point, safety switch, 180° rotatable double handle, adjustable head, and support harness.

Tärkeimmät ominaisuudet:

• Kaksoisparistojärjestelmä: Utilizes two 18V batteries for a combined 36V power output, ensuring extended runtime and consistent performance.
• Harjaton moottori: Provides increased efficiency, longer motor life, and reduced maintenance.
• Nylon Line and Disc Cutting: Equipped for both nylon line trimming and disc cutting for versatile use on various types of vegetation.
• 2-Second Reverse Rotation: A quick reverse spin system helps clear tangled grass and debris from the cutting mechanism.
• Electronic Speed Regulator: Allows adjustment of cutting speed to match the task at hand.
• Lightweight Aluminum Structure: Ensures maximum lightness and durability of the tool.
• Kaksoisturvakytkin: Prevents unintentional activation and enhances user safety.
• Automatic Nylon Line Feed: Simplifies line management during operation.
• 180° Rotatable Double Handle: Ergonomic design for comfortable use and adaptability to different working positions.
• Support Harness: Distributes tool weight for comfortable handling during prolonged use.
• STAYER Li-ion HIGH-TECH Battery: Features protection against overcharge, discharge, overheating, and short circuits, with an LED charge indicator.
• LED-työalueen valo: Valaisee leikkuualueen paremman näkyvyyden takaamiseksi.

3. Asennus

3.1. Akun lataaminen

1. Liitä laturi sopivaan pistorasiaan.
2. Insert the Stayer 18V Li-ion batteries into the charger. Ensure they are seated correctly.
3. Allow the batteries to charge fully. The LED indicator on the charger will show the charging status.
4. Kun akut ovat täysin latautuneet, poista ne laturista.

3.2. Tool Assembly

While the main unit comes largely pre-assembled, some components may require attachment.

• Kahvan kiinnitys: Secure the double handle to the main shaft using the provided fasteners. Ensure it is positioned comfortably for your height and working style.
• Suojan asennus: Attach the protective guard over the cutting head. This guard is crucial for user safety and must always be in place during operation.
• Valjaiden liitäntä: Attach the support harness to the designated point on the brush cutter shaft. Adjust the harness for a comfortable and balanced fit, distributing the tool's weight evenly.

3.3. Akun asennus

1. Ensure the brush cutter is switched off and the safety switch is engaged.
2. Insert two fully charged 18V Li-ion batteries into the dual battery slots on the tool. Push firmly until they click into place.
3. Verify that the batteries are securely seated before use.

4. Käyttöohjeet

4.1. Työkalun käynnistäminen ja pysäyttäminen

1. Varmista, että kaikkia turvaohjeita noudatetaan ja henkilönsuojaimia käytetään.
2. To start, engage the double safety switch and then press the trigger. The tool will begin operating.
3. To stop, release the trigger. The cutting head will cease rotation.

4.2. Nopeuden säätö

Use the electronic speed regulator to adjust the cutting speed. Lower speeds are suitable for light trimming, while higher speeds are for denser vegetation.

4.3. Leikkaustekniikat

• Nylon Line Trimming: Hold the brush cutter at a slight angle to the ground. Use a sweeping motion to cut grass and light weeds. The automatic line feed system will advance the line as needed.
• Disc Cutting: For thicker brush and small saplings, use the cutting disc. Approach the material slowly and maintain a firm grip. Avoid hitting hard objects like rocks or metal.
• Käänteinen kierto: If the cutting head becomes clogged with grass or debris, activate the 2-second reverse rotation system to clear it. Refer to the tool's specific controls for this function.

4.4. Using the Support Harness

Adjust the harness so the tool is balanced and comfortable. This reduces fatigue during extended use and allows for better control.

5. Huolto

Regular maintenance ensures the longevity and safe operation of your brush cutter. Always remove the batteries before performing any maintenance.

5.1. Puhdistus

• After each use, clean the cutting head, guard, and motor housing to remove grass, dirt, and debris.
• Use a dry cloth or soft brush. Do not use water or cleaning solvents that could damage the tool.
• Varmista, että tuuletusaukot ovat esteettömiä ylikuumenemisen estämiseksi.

5.2. Nylon Line Replacement

When the nylon line becomes too short or breaks, replace it according to the instructions provided with the cutting head or refer to the manufacturer's guidelines. Use only recommended line types and diameters.

5.3. Akun hoito ja säilytys

• Säilytä paristoja viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
• Älä säilytä täysin tyhjiä akkuja pitkiä aikoja. Lataa ne säännöllisesti, jos niitä ei käytetä.
• Do not expose batteries to water or impact.

5.4. Tool Storage

Store the brush cutter in a secure, dry place, out of reach of children. Ensure the batteries are removed before storage.

6. Vianmääritys

This section addresses common issues you might encounter with your Stayer 36V L20 Brush Cutter.

7. Tekniset tiedot

Technical data for the Stayer 36V L20 Cordless Brush Cutter (Model 1.2824).