1. Turvallisuustiedot
Read and understand all instructions before operating this manual bender. Failure to follow all instructions may result in serious injury.
- Käytä asianmukaisia henkilönsuojaimia: Always wear safety glasses, gloves, and sturdy footwear when operating the bender.
- Secure the bender: Ensure the bender is securely mounted to a stable workbench or surface before use to prevent movement during operation.
- Inspect material: Before bending, inspect the material for defects, cracks, or inconsistencies that could lead to breakage during bending.
- Clear work area: Keep the work area clean and free of clutter. Ensure adequate space around the bender for safe operation.
- Pidä kädet poissa: Never place hands or fingers near moving parts or the bending area during operation.
- Do not exceed capacity: Adhere strictly to the maximum stock width and thickness specifications to prevent damage to the bender or injury.
- Use correct dies: Select the appropriate bending die for the material and desired bend radius.
- Valvo lapsia: Pidä lapset ja asiattomat poissa työalueelta.
2. Tuote ohiview
The VEVOR YP-9 Manual Bender is a robust tool designed for bending solid round and square metal bars. It features a durable construction and a lever-action design for efficient operation. The unit comes with a set of interchangeable dies to accommodate various bending requirements.
Image 2.1: The VEVOR YP-9 Manual Bender, showing its main components including the base, bending head, and operating handle.
Tärkeimmät ominaisuudet:
- Korkea suorituskyky: Capable of precise bending for various diameters of round and square metal bars.
- 7 Superior Dies: Includes interchangeable dies ranging from 1" to 3" outer diameter, made from reinforced steel for durability.
- Tukeva ja kestävä rakenne: Manufactured with high-quality materials for long-lasting use.
- Energy-saving Structure: Features an ergonomic 44-inch long handle with a non-slip rubber grip for comfortable and labor-saving operation.
- Yleiskäyttö: Suitable for various applications including grids, gates, railings, furniture, and pipeline work.
Image 2.2: Illustration highlighting the heavy-duty A3 steel construction, high strength, and stable base of the bender.
Mukana olevat komponentit:
- 1 x Manual Tube Bender (main unit)
- 7 x Round Dies (1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3")
- 2 x Fixing Pins
- 4 x kiinnitysruuvit
Image 2.3: The seven interchangeable cast steel bending dies provided with the unit, ranging from 1 inch to 3 inches in outer diameter.
3. Tekniset tiedot
| Parametri | Arvo |
| Malli | YP-9 Manual Bender |
| Round Dies Size (Outer Diameter) | 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3" |
| Varaston enimmäisleveys | 1-15/16" (approx. 49 mm) |
| Max varastopaksuus | 5/16" (approx. 8 mm) |
| Capacity (Mild Steel) | 5/16" x 1-1/4" or 1/4" x 2" |
| Kahvan pituus | 44" (noin 111.76 cm) |
| Asennusreiät | 4 holes, 5/8" diameter |
| Tuotteen paino | 32 paunaa (noin 14.5 kg) |
| Tuotteen mitat | 38.5" x 9.4" x 9" (noin 97.79 x 23.87 x 22.86 cm) |
| Virtalähde | Käsikäyttöinen |
Image 3.1: Dimensional drawing of the VEVOR YP-9 Manual Bender, indicating its overall length, width, and height.
4. Asennus
Proper setup is crucial for safe and effective operation of the manual bender.
4.1 Mounting the Bender
- Choose a sturdy workbench or surface capable of supporting the bender and the forces applied during bending.
- Position the bender on the chosen surface. Use the four 5/8" mounting holes on the base as a template to mark drilling locations.
- Drill appropriate holes in the workbench.
- Secure the bender to the workbench using the provided fixing screws or other suitable heavy-duty fasteners. Ensure all fasteners are tightened securely.
4.2 Kahvan kokoaminen
- Insert the long handle into the designated slot on the bending head.
- Align the holes on the handle with the corresponding holes on the bending head.
- Insert the fixing pins through the aligned holes to secure the handle.
4.3 Installing Bending Dies
- Select the appropriate round die based on the desired bend radius and material size.
- Place the selected die onto the central pivot point of the bending head.
- Ensure the die is seated correctly and can rotate freely.
5. Käyttöohjeet
Follow these steps for safe and effective bending:
- Valmistele materiaali: Cut the metal bar to the required length. Ensure the ends are deburred and smooth to prevent injury and ensure a clean bend.
- Select and Install Die: Choose the correct bending die for your material's dimensions and desired bend radius. Install it as described in Section 4.3.
- Sijoita materiaali: Place the metal bar into the bender, ensuring it rests firmly against the selected die and the retaining pins. The point where the bend is desired should align with the center of the die.
- Initiate the Bend: Apply steady, even pressure to the long handle. Slowly pull the handle to begin bending the material around the die.
- Monitor the Bend: Continuously observe the material as it bends. Stop when the desired angle is achieved. Avoid over-bending, as this can weaken the material or damage the bender.
- Vapauta materiaali: Once the bend is complete, carefully release the pressure on the handle and remove the bent material from the bender.
Image 5.1: The VEVOR YP-9 Manual Bender actively bending a metal bar, demonstrating the lever action.
Vinkkejä parhaisiin tuloksiin:
- For thicker materials, apply consistent, slow pressure.
- Practice with scrap material to get a feel for the bender's operation and the material's bending characteristics.
- Ensure the material is clean and free of rust or debris that could affect the bend quality.
6. Huolto
Regular maintenance ensures the longevity and optimal performance of your VEVOR YP-9 Manual Bender.
- Puhdistus: After each use, wipe down the bender, especially the dies and bending head, to remove metal shavings, dust, and debris. Use a dry cloth or a soft brush.
- Voitelu: Periodically apply a light coat of machine oil to all pivot points and moving parts to ensure smooth operation and prevent rust.
- Tarkastus: Regularly inspect the dies, pins, and the main structure for any signs of wear, damage, or deformation. Replace worn or damaged parts immediately.
- Varastointi: Store the bender in a dry, clean environment to prevent corrosion. If storing for extended periods, apply a thin layer of rust preventative to exposed metal surfaces.
7. Vianmääritys
Tässä osiossa käsitellään yleisiä ongelmia, joita saatat kohdata käytön aikana.
| Ongelma | Mahdollinen syy | Ratkaisu |
| Materiaali luistaa taivutuksen aikana | Material not securely positioned; incorrect die size; insufficient clampvoimaa. | Ensure material is firmly against the die and retaining pins. Verify die size matches material. Check if the bender is securely mounted. |
| Bend is inconsistent or uneven | Uneven pressure applied; material defect; bender not stable. | Apply steady, even pressure to the handle. Inspect material for flaws. Re-check bender mounting. |
| Difficulty operating the handle | Material exceeds bender capacity; lack of lubrication; rust on moving parts. | Verify material dimensions are within specifications. Lubricate pivot points and moving parts. Clean any rust. |
| Naarmut taivutetussa materiaalissa | Debris on dies; rough edges on material; worn dies. | Clean dies thoroughly. Deburr material edges before bending. Inspect dies for wear and replace if necessary. |
8. Takuu ja tuki
VEVOR-tuotteet on suunniteltu kestäviksi ja tehokkaiksi. Katso tarkemmat takuutiedot tuotteen mukana toimitetusta takuukortista tai käy VEVORin virallisella verkkosivustolla. websivusto.
If you encounter any issues or require technical assistance, please contact VEVOR customer support through their official channels. Have your product model number (YP-9 Manual Bender) and purchase details ready when contacting support.
VEVOR-virallinen Websivusto: www.vevor.com