Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe Instruction Manual

1. Johdanto

This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.

Kuva 1: Etuosa view of the Barska AX13744 Biometric Safe.

2. Turvallisuustiedot

• Pidä hätäavaimet aina turvallisessa paikassa poissa kassakaapista. Älä säilytä niitä kassakaapin sisällä.
• Varmista, että kassakaappi on tukevasti kiinnitetty luvattoman irrottamisen estämiseksi.
• Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
• Regularly check battery levels to ensure proper function of the electronic lock.
• Pidä kassakaapin ovi suljettuna ja lukittuna, kun sitä ei käytetä.

3. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet:

• Barska AX13744 Safe Unit
• 2 Adjustable Shelves with Shelf Brackets
• 4 AA-paristoa
• Mounting Hardware (bolts, anchors)
• Set of Emergency Back-Up Keys (2 keys)

Kuva 2: Sisältyvät komponentit ja tuotteen mitat.

4. Asennus

4.1. Akun asennus

1. Paikanna paristolokero kassakaapin luukun sisäpuolelta.
2. Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
3. Sulje paristolokeron kansi kunnolla.

4.2. Initial Access and Opening

Upon first use, open the safe using the emergency keys:

1. Paikanna avaimenreiän suojus elektronisesta näppäimistöstä.
2. Remove the cover to expose the keyhole.
3. Insert one of the emergency keys and turn it clockwise while simultaneously turning the handle to open the safe door.
4. Once open, you can proceed with programming fingerprints and PIN codes.

4.3. Kassakaapin asentaminen

The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.

1. Choose a suitable location for the safe, ensuring a stable surface.
2. Mark the pre-drilled mounting points on the floor through the safe's base.
3. Drill pilot holes into the floor at the marked locations.
4. Position the safe over the holes and secure it using the provided bolts and anchors.
5. Varmista, että kassakaappi on tukevasti kiinni eikä se heilu.

Kuva 3: Sisustus view of the safe with adjustable shelves.

5. Käyttöohjeet

5.1. Biometric Fingerprint Access

The safe can store up to 160 distinct fingerprints.

1. To program a fingerprint, press the programming button located inside the safe.
2. Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
3. Repeat the scan multiple times for better accuracy.
4. To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.

5.2. Keypad PIN Code Access

The safe supports up to 2 unique PIN codes.

1. To program a PIN code, press the programming button inside the safe.
2. Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
3. Repeat the process to confirm the PIN code.
4. To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.

5.3. Emergency Key Access

In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.

Figure 4: Emergency access using a 9V battery (not included).

5.4. Hälytysjärjestelmä

• Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
• Lukitustila: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
• Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.

5.5. Sisäinen LED-valo

The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.

5.6. Säädettävät hyllyt

The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.

6. Huolto

• Puhdistus: Pyyhi kassakaapin ulkopinta pehmeällä,amp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.
• Akun vaihto: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
• Lukitusmekanismi: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.

7. Vianmääritys

8. Tekniset tiedot

Figure 5: Fire resistance features of the safe.

9. Takuu ja tuki

For warranty information, please refer to the manufacturer's official website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their websivusto.

Usein kysytyt kysymykset:

• Are replacement parts or accessories available for this product if needed? Vieraile meidän website to request keys or replacement parts.