Johdanto
Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
Tärkeitä turvallisuusohjeita
- Katkaise virta ennen asennusta tai huoltoa.
- This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltage vaatimukset.
- Do not expose the light to excessive moisture or extreme temperatures.
- Handle the LED board with care to avoid damage to components.
- Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
- Asennuksen saa suorittaa vain pätevä henkilö, jos olet epävarma.
Pakkauksen sisältö
- 1 x SAMCON SBE-C-1 DC LED Light with Switch
Tuote loppuview
The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.
Kuva 1: Etuosa view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.
Kuva 2: Takaosa view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.
Asennusohjeet
- Valmistele asennuspinta: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
- Kiinnitä LED-valo: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
- Liitä virta:
- Identify the positive (+) and negative (-) terminals of your DC power source.
- Yhdistä punainen lanka from the LED light to the positiivinen (+) napa of your DC power source.
- Yhdistä musta johto from the LED light to the negatiivinen (-) napa of your DC power source.
- Warning: Ensure correct polarity to prevent damage to the LED light.
- Tarkista yhteydet: Tarkista kaikki liitännät kahdesti varmistaaksesi, että ne ovat tukevasti kiinni ja että polarisaatio on oikein.
Käyttöohjeet
- Virta päälle: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
- Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.
Huolto
- Puhdistus: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Tarkastus: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
- Lämmönhallinta: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty | Ei virtalähdettä | Check if the DC power source is active. |
| Valo ei syty | Virheellinen johdotuksen napaisuus | Verify that the red wire is connected to positive (+) and the black wire to negative (-). |
| Valo ei syty | Viallinen kytkin | Ensure the integrated switch is pressed to the ON position. |
| Valo välkkyy | Epävakaa virtalähde | Ensure a stable DC power source is used. |
| Valo välkkyy | Löysät liitokset | Tarkista ja kiristä kaikki johdinliitännät. |
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Merkki | SAMCON |
| Malli | SBE-C-1 |
| Valon tyyppi | LED |
| Valonlähde Wattage | 10 wattia |
| Erikoisominaisuus | Energiatehokas |
| Ohjaimen tyyppi | Painike |
| Väri | Valkoinen |
| Mukana olevat komponentit | Kevyt |
Takuu ja tuki
For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.