Luqeeg Digital Wooden Alarm Clock User Manual

1. Johdanto

Thank you for choosing the Luqeeg Digital Wooden Alarm Clock. This device combines functionality with a minimalist design, offering time, date, temperature display, and alarm features. Its LED display and wooden finish make it a suitable addition to various environments such as offices, bedrooms, or bedside tables. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

Image 1.1: The Luqeeg Digital Wooden Alarm Clock in a home setting.

2. Turvallisuustiedot

• Älä altista laitetta vedelle tai korkealle kosteudelle.
• Vältä äärimmäisiä lämpötiloja ja suoraa auringonvaloa.
• Älä pudota laitetta tai kohdista siihen voimakkaita iskuja.
• Pidä poissa lasten ulottuvilta.
• Käytä virtalähteenä ainoastaan ​​laitteen mukana toimitettua USB-kaapelia.
• Hävitä paristot vastuullisesti paikallisten määräysten mukaisesti.

3. Pakkauksen sisältö

Tarkista pakkauksesta seuraavat tuotteet:

• 1 x Luqeeg LED Wooden Clock
• 1 x USB-kaapeli
• 1 x Käyttöohje (tämä asiakirja)

4. Tuote ohiview

Familiarize yourself with the buttons and ports on the back of your alarm clock:

Kuva 4.1: Takaosa view of the clock with labeled controls.

• Akkulaukku: Compartment for 3 AAA batteries (not included) for backup power.
• Virtasovittimen liitin: Connect the USB cable for primary power.
• RESET-avain: Resets the clock to factory settings.
• DOWN Adjustment Key: Pienentää arvoja asetuksen aikana.
• UP Adjustment Key: Lisää arvoja asetuksen aikana.
• SET-näppäin: Enters setting mode and confirms selections.

5. Asennus

5.1 Laitteen virran kytkeminen

The clock can be powered via the included USB cable or by batteries for backup. For continuous operation, it is recommended to use the USB power supply.

1. Primary Power (USB): Connect the small end of the USB cable to the Power Adapter Jack on the back of the clock. Connect the other end to a USB power adapter (not included) or a powered USB port.
2. Akun varmuuskopiointi: Open the Battery Case on the back. Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity. Additionally, insert 1 CR2032 button cell battery (not included) for memory function, which retains settings during power outages.

Image 5.1: The clock with its USB cable for power connection.

6. Käyttöohjeet

6.1 Basic Display Modes

The clock cycles through displaying time, date, and temperature. You can usually switch between display modes by pressing the UP or DOWN button outside of setting mode.

6.2 Kellonajan ja päivämäärän asettaminen

1. Paina SARJA -painiketta kerran siirtyäksesi ajan asetustilaan. Tunnit vilkkuvat.
2. Käytä UP ja ALAS painikkeita säätääksesi tuntia.
3. Paina SARJA again to move to minute setting. Adjust with UP ja ALAS.
4. Jatka painamista SARJA selaa vuoden, kuukauden ja päivän asetuksia ja säädä kutakin UP ja ALAS.
5. Paina SARJA viimeisen kerran poistuaksesi asetustilasta.

6.3 Hälytyksen asettaminen

The clock supports multiple alarms (e.g., AL1, AL2, AL3). The exact number may vary by model.

1. Paina SARJA button repeatedly until 'AL' appears, indicating alarm setting mode.
2. Paina SARJA again to select an alarm (e.g., AL1). The hour digits will flash.
3. Käyttää UP ja ALAS asettaaksesi haluamasi herätysajan.
4. Paina SARJA to move to minute setting. Adjust with UP ja ALAS.
5. Paina SARJA to confirm the alarm time. You may then see an option to enable/disable the alarm (ON/OFF). Use UP/ALAS valitaksesi.
6. Repeat for other alarms if desired. Press SARJA poistuaksesi hälytyksen asetustilasta.

6.4 Kirkkauden säätö

The clock features 3 levels of brightness. To adjust, press the UP button outside of setting mode. Each press will cycle through the brightness levels.

6.5 Voice Control Power Saving Mode

To conserve power, the display can be set to turn off automatically and activate only when sound is detected (e.g., a clap or tap). This mode is typically enabled or disabled by a long press of the ALAS button or a specific combination of buttons. Refer to the quick start guide for your specific model if this function is not immediately apparent.

Image 6.1: Demonstrating the voice control power saving mode.

7. Huolto

• Puhdistus: Wipe the clock gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Akun vaihto: If using battery backup, replace AAA batteries when the display dims or functions become erratic. Replace the CR2032 memory battery periodically (e.g., annually) to ensure settings are retained during power interruptions.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding the operation of your Luqeeg Digital Wooden Alarm Clock, please contact the retailer or manufacturer's customer service. Please have your model number (Luqeeggxwrao5h2y8620) and purchase information ready when contacting support.