UEi DL579-600A kaksoisnäyttö TRMS-Clamp Mittarin käyttöopas

Tuote loppuview

The UEi DL579 is a CAT III 600 V rated True RMS AC Clamp Meter designed for comprehensive electrical testing. It features a dual display for simultaneous readings and measures AC/DC voltage, AC current, resistance, capacitance, and temperature.

This versatile tool is ideal for checking system boards, live wires, and performing various electrical measurements in professional settings.

Tärkeimmät ominaisuudet:

• CAT III 600 V rating for enhanced safety.
• Measures AC Volts up to 750 VAC.
• Measures DC Volts up to 1000 VDC.
• Measures AC current up to 600A.
• Measures Resistance up to 60MΩ.
• Includes temperature measurement via K-Type thermocouples.
• Capacitance measurement capability.
• Dual display for simultaneous readings.
• Inrush current function for motor startup analysis.

Komponentit ja säätimet

Kuva 1: Etuosa view of the UEi DL579-600A Dual Display TRMS-Clamp Meter, showing the main display, rotary dial, and clamp leuka.

Figure 2: The DL579-600A meter alongside its accessories, including test leads, K-Type thermocouple, carrying pouch, and batteries.

Detailed Component Breakdown:

• A. Clamp: Used to measure inductive AC current. Opens to 1.25 inches (32.0mm).
• B. Johtimen kohdistusmerkit: Indicators for proper conductor placement within the clamp.
• C. Category Max Indicator: Displays the maximum CAT Rating for the clamp leuka.
• D. NCV Alert Light: Illuminates when Non-Contact Voltage (NCV) is detected.
• F. Clamp Vipu: Used to open and close the current clamp leuka.
• G. Pyörivä valitsin: Used to select the desired measurement function (e.g., Volts, Amps, Ohms, Temp).
• H. Aluepainike: Press to set the manual range for measurements.
• I. SELECT-painike: Used to toggle between functions within a single rotary dial position (e.g., AC/DC).
• J. Category Max Indicator: Displays the maximum CAT Rating for the input jacks.
• K. Test Lead Input Jacks: Multifunction and Positive input jacks for connecting test leads.
• L. Wire Separation Tab/NCV Sensor: Used to isolate an individual wire from a bundle for testing. The NCV sensor detects live voltage.
• M. Test Lead Holder: Kätevä säilytyspaikka mittausjohdoille.
• N. Hand Guide: Provides a point of reference for operator safety during use.
• O. Hold/Backlight Button: Press to hold the current reading on the display or activate the backlight.
• P. Min/Max-painike: Records minimum and maximum readings during a measurement session.
• K. Näyttö: Dual LCD display showing measurement values.
• R. Inrush/Hz Duty -painike: Activates Inrush current measurement or switches to Frequency/Duty Cycle mode.
• S. K-tyypin lämpötila-anturin tulot: Jacks for connecting the K-Type thermocouple for temperature measurements.
• T. Tuloliittimen lukko: Secures the test leads in the input jacks.
• U. Built-in versatile magnet: Can be used as a mount or with an optional strap.
• V. Pariston kansi: Suojaa akkulokeroa.
• W. Akkutilan salvat: Kiinnitä akun kansi.

Kuva 3: Lähikuva view of the dual display, showing simultaneous readings for different parameters.

Figure 4: Detail of the test lead input jacks and the K-Type temperature probe input, with a probe connected.

Kuva 5: Takaosa view showing the built-in versatile magnet, allowing for hands-free operation or attachment to metal surfaces.

Figure 6: Close-up of the battery compartment, secured by latches, for easy battery replacement.

Asennus ja ensimmäinen käyttö

1. Akun asennus: Open the battery cover (V) by releasing the latches (W). Insert the required batteries, ensuring correct polarity. Close the cover securely.
2. Virta päälle: Rotate the Rotary Selector Dial (G) from the "OFF" position to any desired measurement function (e.g., V~ for AC Volts, A~ for AC Current). The display (Q) will illuminate.
3. Mittausjohtojen kytkeminen: Voltage, resistance, capacitance, or diode measurements, insert the test leads into the appropriate Test Lead Input Jacks (K). Ensure the leads are fully inserted and secured by the Input Jack Lock (T).
4. Connecting Temperature Probe: For temperature measurements, connect the K-Type thermocouple to the K-Type Temperature Probe Inputs (S).

Käyttöohjeet

Measuring AC Current (Clamp Toiminto):

1. Rotate the Rotary Selector Dial (G) to the "A~" position.
2. Paina Clamp Lever (F) to open the Clamp (A).
3. Place the single conductor wire to be measured within the clamp jaw, ensuring it aligns with the Conductor Alignment Marks (B).
4. Vapauta Clamp Lever (F) to close the jaw around the conductor.
5. Read the AC current value on the Display (Q).

Measuring Voltage (AC/DC):

1. Connect the test leads to the appropriate Test Lead Input Jacks (K).
2. Rotate the Rotary Selector Dial (G) to the "V~" (AC Volts) or "V-" (DC Volts) position. Use the SELECT button (I) to toggle if needed.
3. Kosketa mittausjohtoja piirin kohtiin, joissa vol.tage on mitattava.
4. Lue voltage value on the Display (Q).

Lämpötilan mittaus:

1. Connect the K-Type thermocouple to the K-Type Temperature Probe Inputs (S).
2. Rotate the Rotary Selector Dial (G) to the "Temp" position.
3. Place the thermocouple tip on or near the object whose temperature is to be measured.
4. Read the temperature value on the Display (Q).

Using Hold/Backlight and Min/Max Functions:

• Pidä: Press the Hold/Backlight Button (O) briefly to freeze the current reading on the display. Press again to release.
• Taustavalo: Press and hold the Hold/Backlight Button (O) to activate the display backlight for low-light conditions. Press and hold again to turn off.
• Min/Max: Press the Min/Max Button (P) to enter Min/Max recording mode. The meter will continuously record the minimum and maximum values. Press again to cycle through Min, Max, and current readings. Hold to exit.

Huolto

• Puhdistus: Wipe the meter with a dry, clean cloth. Do not use abrasive cleaners or solvents.
• Akun vaihto: When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings. Refer to the "Setup and Initial Use" section for battery installation.
• Varastointi: Store the meter in its provided carrying pouch (Figure 2) in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Kalibrointi: For optimal accuracy, periodic calibration by a qualified service center is recommended.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

The UEi DL579-600A Dual Display TRMS-Clamp Meter comes with a yhden vuoden takuu from the date of purchase. For warranty claims, technical support, or service inquiries, please refer to the contact information provided in the included warranty documentation or visit the official UEi Test Instruments websivusto.

Saat lisätukea ja resursseja osoitteesta UEi Test Instruments Store on Amazon.