MOUNTUP Yhden näytön seinäkiinnikkeen käyttöohje

Tuote loppuview

The MOUNTUP Single Monitor Wall Mount (Model MU2003-AU) is designed to securely hold a single computer screen on a wall, freeing up desk space and allowing for flexible viewing angles. This gas spring monitor arm supports most flat or curved monitors up to 32 inches, with a weight capacity ranging from 4.4 to 19.8 pounds. It is compatible with VESA patterns 75x75mm and 100x100mm. The mount is suitable for installation on wood studs, brick, and concrete walls, but it is not intended for drywall-only applications.

Image: The MOUNTUP Single Monitor Wall Mount, showcasing its sleek black design and articulated arm. This mount provides a space-saving solution by elevating your monitor off the desk.

Näytön yhteensopivuus

Before installation, ensure your monitor meets the following compatibility requirements:

• Näytön koko: Fits most flat or curved computer screens up to 32 inches.
• Kantavuus: Supports displays weighing between 4.4 pounds (2 kg) and 19.8 pounds (9 kg).
• VESA-kuvio: Compatible with VESA mounting patterns of 75x75mm and 100x100mm. Verify the four screw holes on the back of your monitor. If your monitor has a different VESA pattern, an adapter may be required (not included).

Image: Visual representation of the monitor mount's compatibility, highlighting the maximum load capacity (4.4-19.8 lbs), VESA compatibility (75x75mm, 100x100mm), and maximum screen size (32 inches).

Asennus ja asennus

Carefully follow these steps to install your MOUNTUP Single Monitor Wall Mount. It is recommended to have a second person assist during certain stages asennuksesta.

1. Wall Compatibility

This monitor mount is designed for installation on solid wood studs, concrete walls, or brick walls. ÄLÄ asenna pelkästään kipsilevyyn.

Image: Illustrates the types of walls suitable for installation: wood stud, concrete wall, and brick wall. It explicitly warns against mounting on drywall without a stud.

2. Attaching Arm Assembly to Wall

Locate a suitable mounting position on your chosen wall type. Use a stud finder to accurately locate the center of a wood stud if applicable. Mark the pilot holes for drilling.

Drill pilot holes according to the manual's specifications for your wall type. Secure the arm assembly to the wall using the provided lag bolts and washers. Ensure the assembly is level before fully tightening.

Image: Shows the built-in gas spring mechanism and the quick-release VESA plate, which simplifies the process of attaching and detaching the monitor.

3. Attaching Monitor to VESA Plate

Attach the VESA plate to the back of your monitor using the appropriate screws and washers provided. Ensure the plate is securely fastened to the monitor's VESA mounting holes.

4. Mounting Monitor onto Arm

Carefully slide the monitor (with the attached VESA plate) onto the head of the swivel arm. Ensure it clicks securely into place. Install the security bolt to prevent accidental dislodgement.

Käyttö ja säädöt

The MOUNTUP monitor arm offers full motion capabilities for optimal viewmukavuutta ja ergonomista asettelua.

1. Kaasujousen jännityksen säätö

The gas spring tension needs to be adjusted to match your monitor's weight. This ensures the arm can hold the monitor at any desired height without drifting up or down.

• Jos näyttö putoaa alas: Turn the screw counter-clockwise ("+") direction to increase gas spring tension for a heavier monitor.
• Jos näyttö rises up: Turn the screw clockwise ("-") direction to reduce gas spring tension for a lighter monitor.

Hold the arm in a horizontal position while making adjustments. Refer to the table in the image for approximate turns based on monitor weight.

Kuva: Yksityiskohtainen view of the gas spring adjustment screw and the tilt angle adjustment bolt, with instructions on how to modify tension and angle.

2. Tilt Angle Adjustment

To adjust the monitor's tilt angle (up 90° / down 45°):

1. Löysää kallistuspulttia.
2. Adjust the monitor to your desired angle.
3. Retighten the tilting bolt to secure the position.

3. Swivel and Rotation

The monitor arm allows for extensive movement:

• Kääntyvä: The arm can swivel up to 270° at the wall plate and 180° at the monitor connection point, allowing you to easily share your screen or adjust your viewkuvakulma huoneen eri kohdista.
• Kierto: The monitor can rotate 360° (from landscape to portrait orientation) without removing it from the mount.
• Korkeuden säätö: The gas spring arm provides up to 12.2 inches of vertical height adjustment, allowing you to position your monitor at an ergonomic eye level.

Image: Demonstrates the full range of motion, including height adjustment (12.2 inches), 360° rotation, 180° swivel at two points, and tilt angles (+90°/-90°).

4. Kaapelien hallinta

Integrated cable management clips help keep your workspace tidy by routing cables along the arm. Open the clips, insert your cables, and close them to secure.

Image: Before and after comparison showing how the monitor arm helps create a clutter-free and ergonomically optimized workspace.

Huolto

To ensure the longevity and optimal performance of your MOUNTUP monitor arm, regular maintenance is recommended:

• Puhdistus: Pyyhi teline pehmeällä,amp liinalla. Vältä hankaavien puhdistusaineiden tai liuottimien käyttöä, jotka voivat vahingoittaa pintaa.
• Tarkastus: Periodically check all bolts and connections to ensure they are secure. Retighten if necessary.
• Kaasujousi: If the monitor arm's movement becomes stiff or too loose over time, re-adjust the gas spring tension as described in the "Operating and Adjustments" section.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

MOUNTUP provides 3-year support for this monitor mount, reflecting confidence in its construction, strength, and durability. For any pre-purchase questions, installation assistance, or support needs, please do not hesitate to contact MOUNTUP customer service.

Lisätietoja saat viralliselta sivustolta Asennusopas (PDF) ja Käyttöopas (PDF) saatavilla verkossa.