Johdanto
The Midland BR02 Pro Z is a robust and efficient two-way radio kit designed for professional use in environments such as shops, hotels, and restaurants. This kit provides reliable and rapid communication through its essential functions. Featuring 32 PMR446 channels, 50 CTCSS tones, and 116 DCS codes, the BR02 Pro Z ensures clear and secure conversations. Its lithium-ion battery offers extended operational time, managed by an automatic power-saving function for energy efficiency. This manual will guide you through the setup, operation, and maintenance of your BR02 Pro Z radios.
Pakkauksen sisältö
Valitse seuraavat kohdat rastittamalla ruutu:
- 2 x Midland BR02 Pro Z Two-Way Radios
- 2 x MA-21LKi Micro-Earpieces
- 2 x lataustelakkaa
- 2 x AC Power Adapters for Chargers
- 2 x vyökiinnikkeet
- 2 x Lithium-ion Battery Packs (pre-installed or separate)

Image: Complete Midland BR02 Pro Z kit showing two radios, two MA-21LKi micro-earpieces, two charging docks, and two power adapters.
Asennus
1. Akun asennus ja lataus
- Varmista, että radio on sammutettu.
- If the battery is not pre-installed, align the lithium-ion battery pack with the compartment on the back of the radio and slide it into place until it clicks securely.
- Aseta radio lataustelakkaan.
- Connect the AC power adapter to the charging dock and then plug it into a standard wall outlet.
- The charging indicator light on the dock will illuminate (typically red) to show charging is in progress. It will change color (typically green) when fully charged.
- Anna akun latautua täyteen noin 4–6 tuntia ennen ensimmäistä käyttökertaa.
2. Kiinnitä vyöpidike
Kohdista vyöklipsi radion takana oleviin ruuvinreikiin ja kiinnitä se mukana toimitetuilla ruuveilla. Tämä mahdollistaa kätevän kantamisen.
3. Connecting the Micro-Earpiece (MA-21LKi)
Insert the MA-21LKi micro-earpiece's dual-pin connector into the accessory jack on the side of the radio. Ensure it is firmly seated for proper audio transmission and reception.

Kuva: Edessä view of a single Midland BR02 Pro Z radio, highlighting its robust design and controls.
Käyttöohjeet
1. Virta päälle/pois ja äänenvoimakkuuden säätö
- Käynnistä radio kiertämällä ON/OFF/äänenvoimakkuuden säädin clockwise until you hear a click and a voice announcement.
- Jatka nupin kiertämistä myötäpäivään lisätäksesi äänenvoimakkuutta ja vastapäivään vähentääksesi sitä.
- Sammuta virta kääntämällä nuppia vastapäivään, kunnes kuulet napsahduksen.
2. Kanavan valinta
- The BR02 Pro Z has 32 PMR446 channels (16 + 16 pre-programmed).
- Kierrä Kanavanvalitsin (usually the top-most knob) to choose your desired channel.
- The radio will provide a voice announcement of the selected channel number.
- Ensure all radios you wish to communicate with are set to the same channel and CTCSS/DCS code.
3. Lähetys ja vastaanotto
- Lähettääksesi, pidä painettuna Push-To-Talk (PTT) -painike located on the side of the radio. Speak clearly into the microphone (or earpiece microphone).
- Lopeta lähetys vapauttamalla PTT-painike ja kuuntele vastausta.
- Radio vastaanottaa lähetyksiä automaattisesti, kun PTT-painiketta ei paineta.
4. Skannaustoiminto
The Scan function allows the radio to constantly check all channels for ongoing conversations. When a signal is detected, the radio will temporarily stop on that channel. This function is typically activated via programming software.
5. Näyttötoiminto
The Monitor function temporarily disables the squelch, allowing you to hear very weak signals or to check if a channel is clear before transmitting. This function is usually assigned to a programmable side button.
6. CTCSS-äänet ja DCS-koodit
The BR02 Pro Z supports 50 CTCSS tones and 116 DCS codes (normal and inverted). These codes help filter out unwanted conversations on the same channel. To communicate, all radios must be set to the same channel and the same CTCSS tone or DCS code. These are typically set via programming software.

Kuva: Sivu view of the Midland BR02 Pro Z radio, illustrating the PTT button and accessory port for earpieces.
Huolto
1. Puhdistus
- Pyyhi radion ulkopinta pehmeällä,amp kangas. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
- Ensure no moisture enters the accessory jack or speaker/microphone openings.
2. Akun hoito
- Akun käyttöiän maksimoimiseksi vältä akun usein tapahtuvaa täydellistä tyhjentämistä.
- Säilytä radiota ja akkua viileässä ja kuivassa paikassa, kun sitä ei käytetä pitkään aikaan.
- The radio features an automatic power-saving function to optimize battery consumption.
3. Yleinen hoito
- Vältä radion pudottamista tai sen altistamista voimakkaille iskuille.
- Pidä radio poissa äärimmäisistä lämpötiloista ja suorasta auringonvalosta.
- The radio is not waterproof; avoid exposure to water or high humidity.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Radio ei käynnisty. | Akku on tyhjä tai se ei ole asennettu oikein. | Lataa akku täyteen. Varmista, että akku on oikein paikallaan lokerossaan. |
| Ei voi lähettää tai vastaanottaa. | Incorrect channel or CTCSS/DCS code. Out of range. | Verify all radios are on the same channel and code. Move closer to the other radio. |
| Huono äänenlaatu tai ei ääntä. | Volume too low. Earpiece not connected properly. Squelch setting too high. | Increase volume. Re-insert earpiece connector firmly. Use the Monitor function to check for weak signals. |
| Akun käyttöikä on odotettua lyhyempi. | Battery not fully charged. Old battery. Frequent transmissions. | Ensure battery is fully charged. Consider replacing old batteries. Minimize unnecessary transmissions. |
Tekniset tiedot
- Malli: C1524
- Merkki: Midland
- Väri: Musta
- Kanavien määrä: 32 PMR446 (16 + 16 pre-programmed)
- Taajuusalue: 446.00625–446.09375 MHz
- CTCSS Tones: 50
- DCS Codes: 116 (Normal and Inverted)
- Suurin kantama: Up to 12 Kilometers (depending on terrain and conditions)
- Akun tyyppi: Lithium-ion (2000 mAh, 7.4V)
- Akun kesto: Jopa 24 tuntia (tyypillinen käyttö)
- Erikoisominaisuudet: Rechargeable batteries, Scan function (programmable), Monitor function, Automatic Power Save, Voice Announcements, Low battery voice indication
- Paino: 180 g (sisältää akun)
- Mitat: 118 x 60 x 35 mm (ei sisällä antennia)
- Vedenkestävyystaso: Ei vedenpitävä
- Yhteensopivat lisävarusteet: MA-21LKi micro-earpieces and other compatible two-pin accessories.
Takuu ja tuki
Takuutiedot
Specific warranty details for the Midland BR02 Pro Z are not provided in the product information. Please refer to the warranty card included with your purchase or contact Midland customer service for detailed warranty terms and conditions.
Asiakastuki
For technical assistance, troubleshooting beyond this manual, or inquiries regarding spare parts and software updates, please contact Midland customer support. You can typically find contact information on the manufacturer's official websivustolla tai tuotepakkauksessa.
Please note that information regarding spare parts availability and guaranteed software updates is not available in the provided product details.





