Behringer KAKSIVAIHEINEN

Behringer DUAL-PHASE Analog Phaser Pedal Instruction Manual

Model: DUAL-PHASE | Brand: Behringer

1. Johdanto

The Behringer DUAL-PHASE is an authentic analog dual-phase shifter pedal designed to recreate the classic 70s phaser sound. Utilizing 12 optocouplers, this pedal delivers a rich, intense, and natural phasing effect. It features two independent sweep generators and two phaser sections (A and B), offering extensive control over your sound. With CV control capabilities and a robust metal chassis, the DUAL-PHASE is a versatile addition to any musician's setup.

2. Turvallisuusohjeet

  • Virtalähde: Use only a 9V DC, center-negative power adapter. Ensure the adapter provides sufficient current (at least 670mA, 1A recommended). Using an incorrect power supply can damage the unit and void the warranty.
  • Kosteus: Do not expose the unit to rain, moisture, or any liquids.
  • Ilmanvaihto: Varmista riittävä ilmanvaihto laitteen ympärillä. Älä tuki tuuletusaukkoja.
  • Puhdistus: Clean the unit only with a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Sijoitus: Place the unit on a stable, flat surface. Avoid extreme temperatures or direct sunlight.
  • Huolto: Älä yritä huoltaa tätä laitetta itse. Jätä kaikki huoltotyöt pätevän huoltohenkilöstön tehtäväksi.

3. Tuote ohiview

The DUAL-PHASE pedal features a comprehensive set of controls for shaping your phaser effects. Below is an overview of the front panel controls and rear panel connections.

3.1 Etupaneelin säätimet

Behringer DUAL-PHASE Analog Phaser Pedal front panel

Figure 1: Behringer DUAL-PHASE Analog Phaser Pedal - Front Panel Overview

  • 1. SWEEP GENERATOR 1: Controls for the first sweep generator.
    • HINTA: Adjusts the speed of the phaser sweep for Generator 1.
    • MUOTO: Selects the waveform shape for the sweep (e.g., sine, triangle).
    • CV: Switch to enable external Control Voltage input for Generator 1 rate control.
    Close-up of Sweep Generator 1 controls on Behringer DUAL-PHASE

    Figure 2: Close-up of Sweep Generator 1 controls (RATE, SHAPE, CV switch).

  • 2. PHASOR A: Controls for the first phaser section.
    • SYVYYS: Adjusts the intensity or range of the phasing effect for Phasor A.
    • PALAUTE: Controls the amount of phased signal fed back into the input, creating more resonant and intense effects.
  • 3. SWEEP GENERATOR 2: Controls for the second sweep generator.
    • HINTA: Adjusts the speed of the phaser sweep for Generator 2.
    • MUOTO: Selects the waveform shape for the sweep.
  • 4. PHASOR B: Controls for the second phaser section.
    • SYVYYS: Adjusts the intensity or range of the phasing effect for Phasor B.
    • PALAUTE: Controls the amount of phased signal fed back into the input for Phasor B.
  • 5. SWEEP SYNC: Controls for synchronizing and blending the sweep generators.
    • NORM/REV Switch: Changes the phase relationship between the two sweep generators.
    • GEN 1/GEN 2 Switch: Selects which generator controls the overall sweep.
    • SWEEP Knob: Blends the output of the two sweep generators.
  • 6. PHASOR B INPUT (IN A/D Switch): Determines the input source for Phasor B. When set to 'IN A', Phasor B receives its input from the output of Phasor A, creating a series effect. When set to 'D', Phasor B receives a direct input, allowing for parallel processing or dual-channel use.
  • 7. Footswitches (A & B): Engage or bypass the respective phaser sections.

3.2 Takapaneelin liitännät

The rear panel typically includes the following connections:

  • INPUT: 1/4" TS jack for connecting your instrument or audio source.
  • LÄHTÖ: 1/4" TS jack for connecting to an amplifier- tai next-efektipedaali.
  • VIRRANSYÖTTÖ: 9V DC input for connecting the power adapter.
  • CV INPUT: 1/4" TS jack for external 5V Control Voltage input to modulate parameters.

4. Asennus

  1. Virtaliitäntä: Connect a 9V DC, center-negative power adapter (minimum 670mA, 1A recommended) to the POWER INPUT jack on the rear panel.
  2. Äänitulo: Connect your instrument (e.g., guitar) or audio source to the INPUT jack using a standard 1/4" TS instrument cable.
  3. Äänilähtö: Liitä OUTPUT-liitäntä laitteeseesi. amplifier, mixer, or the input of another effect pedal using a standard 1/4" TS instrument cable.
  4. CV Control (Optional): If using external CV control, connect a 5V Control Voltage source to the CV INPUT jack. Ensure the CV switch for the desired sweep generator is engaged.
  5. Alkuasetukset: For a basic phaser effect, set all DEPTH and FEEDBACK knobs to mid-range (5), and adjust the RATE and SHAPE knobs on Sweep Generator 1 to your preference. Ensure the PHASOR B INPUT switch is set to 'IN A' for a combined effect, or 'D' for independent operation.

5. Käyttöohjeet

The DUAL-PHASE offers a wide range of phasing effects. Experiment with the controls to discover its full potential.

  • Vaikutuksen saaminen: Press the A footswitch to engage Phasor A. Press the B footswitch to engage Phasor B. The corresponding LED will illuminate when active.
  • Adjusting Sweep Speed: Use the RATE knobs on SWEEP GENERATOR 1 and SWEEP GENERATOR 2 to control the speed of the phaser sweep.
  • Changing Sweep Shape: The SHAPE switches allow you to select different waveform shapes for the sweep, altering the character of the modulation.
  • Controlling Effect Intensity: The DEPTH knobs for PHASOR A and PHASOR B adjust how pronounced the phasing effect is. Higher settings result in a deeper, more dramatic sweep.
  • Adding Resonance: The FEEDBACK knobs for PHASOR A and PHASOR B introduce a portion of the output signal back into the input, creating a more resonant,

    Aiheeseen liittyvät asiakirjat - DUAL-PHASE

    Preview Behringer DUAL-PHASE -pikaopas: Aito kaksoisvaiheensiirrin
    Aloita nopeasti Behringer DUAL-PHASE:n kanssa, joka on autenttinen kaksoisvaiheensiirrin 12 optokytkimellä. Tämä opas kattaa tärkeät turvallisuusohjeet, yksityiskohtaiset ohjauskuvaukset ja asennusohjeet perus-, Lush- ja stereo-ph-äänille.asing-efektit.
    Preview BEHRINGER SP400 SUPER PHASE SHIFTER - Kitaraefektipedaali
    Tutustu BEHRINGER SP400 SUPER PHASE SHIFTER -pedaaliin, monipuoliseen kitaraefektipedaaliin, joka tarjoaa laajan valikoiman vaihesiirtoefektejä vinyylistä...tage psychedelia to modern sound manipulation. Features include Real Sound Modeling (RSM) technology, dedicated controls for Mode, Resonance, Depth, and Rate, and a blue LED indicator. Operates on 9V battery or optional PSU-SB DC power supply. Ideal for musicians seeking diverse phase effects.
    Preview Behringer SUPER FUZZ SF300: 3-Mode Fuzz Distortion Effects Pedal - User Manual & Specifications
    Comprehensive guide to the Behringer SUPER FUZZ SF300, a 3-mode fuzz distortion effects pedal for electric guitars. Learn about controls, specifications, safety, and compliance information.
    Preview Behringer Chorus -sinfoniaorkesteri: Vintage Modulaatiopedaalin pika-aloitusopas
    Aloita Behringer Chorus Symphony -pedaalin käyttö. Tämä opas kattaa asennuksen, säätimet, turvallisuusohjeet ja tekniset tiedot.tage-tyylinen modulaatioefektipedaali.
    Preview Behringer FX600 Digital Stereo Multi-Effects Pedal User Manual
    Comprehensive guide to the Behringer FX600 Digital Stereo Multi-Effects Pedal, covering its 24-bit stereo effects, controls, specifications, and safety instructions. Learn about Chorus, Flanger, Phaser, Delay, Tremolo, and Pitch Shifter effects.
    Preview Behringer FCV100 Ultra-Joustava Kaksoistilaisella Jalkapedaalilla Pikaopas
    Tämä pikaopas tarjoaa olennaista tietoa Behringer FCV100 Ultra-Flible Dual-Mode -jalkapedaalin asentamiseen ja käyttöön äänenvoimakkuuden ja modulaation säätöön. Se sisältää turvallisuusohjeet, käyttötilat ja tekniset tiedot.

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.