Johdanto
This manual provides essential information for the safe and effective use of your JAMARA AX8 Lipo Battery. This lithium-polymer battery is designed to deliver high energy content with low self-discharge, making it suitable for various model applications such as quadcopters, drones, helicopters, and model cars. Please read these instructions carefully before use to ensure optimal performance and longevity of your battery.
Turvallisuustiedot
Warning: This product is not a toy.
Litiumpolymeeriakkuja (LiPo) on käsiteltävä varoen. Turvallisuusohjeiden noudattamatta jättäminen voi johtaa tulipaloon, henkilövahinkoihin tai omaisuusvahinkoihin.
- Do not puncture, drop, short-circuit, or disassemble the battery.
- Älä altista akkua äärimmäisille lämpötiloille, suoralle auringonvalolle tai kosteudelle.
- Always use a LiPo-compatible charger and follow its instructions.
- Älä koskaan jätä lataavia akkuja ilman valvontaa.
- Säilytä paristoja viileässä, kuivassa paikassa, erillään syttyvistä materiaaleista.
- Jos akku turpoaa, vuotaa tai siinä on merkkejä vaurioista, lopeta käyttö välittömästi ja hävitä se asianmukaisesti.
Pakkauksen sisältö
Varmista, että pakkauksessa on kaikki tarvittavat osat:
- 1 x JAMARA AX8 Lipo Battery (3.7V, 300mAh)
Asennus
The JAMARA AX8 Lipo Battery is designed for quick integration into compatible models.
- Alkuperäinen lataus: Before first use, fully charge the battery using a compatible LiPo charger. Refer to your charger's manual for specific charging procedures.
- Connecting to Model: Carefully align the battery connector with the corresponding port on your model (e.g., quadcopter, drone). Ensure a secure connection. Do not force the connector.

Image: Close-up of the battery's connector. This white two-pin connector ensures a secure and reliable power supply to your model.

Image: The JAMARA AX8 Lipo battery with indicated dimensions. The battery measures approximately 3.5 cm in length, 2 cm in width, and 0.8 cm in height, making it compact for various model applications.
Toiminta
Once the battery is charged and securely connected to your model, you can begin operation.
- Ensure your model's power switch is in the OFF position before connecting the battery.
- After connecting the battery, turn on your model's power switch.
- Monitor battery performance during use. If you notice a significant drop in power or performance, it indicates the battery is nearing depletion.
- Avoid completely discharging the battery, as this can damage LiPo cells. The integrated Battery Management System (BMS) helps protect against deep discharge.
- Disconnect the battery from the model after each use.
Huolto
Proper maintenance extends the life and performance of your LiPo battery.
- Lataus: Always use a charger specifically designed for LiPo batteries. Follow the charger's instructions for correct voltage ja nykyiset asetukset.
- Varastointi: For long-term storage, charge the battery to a 'storage voltage' (typically around 3.8V per cell). Store in a cool, dry place, ideally in a fire-resistant LiPo bag.
- Tarkastus: Regularly inspect the battery for any signs of damage, swelling, or connector wear. Do not use a damaged battery.
- Hävittäminen: Dispose of old or damaged LiPo batteries responsibly according to local regulations. Never throw them in household waste.
Vianetsintä
If you encounter issues with your JAMARA AX8 Lipo Battery, consider the following:
- Akku ei lataudu:
- Varmista, että laturi on kytketty oikein ja toimii.
- Verify the battery connector is clean and securely attached to the charger.
- Check if the charger settings are correct for a 3.7V LiPo battery.
- Low power or short run time:
- Varmista ennen käyttöä, että akku on ladattu täyteen.
- The battery may be old or degraded. LiPo batteries have a finite number of charge cycles.
- Check for any damage to the battery or its connectors.
- Akun turpoaminen:
- Immediately discontinue use. Swelling indicates internal damage and a potential safety hazard.
- Dispose of the battery safely according to local regulations.
Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Tekniikka | Li-polymeeri |
| Kapasiteetti | 300 mAh |
| Voitage | 3.7 V |
| Tehoa | 1.11 Wh |
| Mallinumero | 423193 |
| Mallin nimi | AX8 Lipo |
| Mitat (P x L x K) | 35 mm x 20 mm x 8 mm (1.38 x 0.79 x 0.31 tuumaa) |
| Paino | Noin 0.01 kilogrammaa |
| Uudelleenkäytettävyys | Ladattava |
| Suositeltu käyttö | Drone, RC Models |
Takuu ja tuki
For warranty information and technical support, please refer to the documentation provided with your original purchase or visit the official Jamara websivusto. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.