RYOBI PBP002

RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) User Manual

1. Johdanto ja loppuview

The RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (model PBP002) is designed to provide reliable power for a wide range of RYOBI ONE+ cordless tools. This compact and lightweight battery ensures consistent performance for various applications, enhancing the portability and efficiency of your tools.

RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery PBP002

Kuva 1.1: Edessä view of the RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) showing the fuel gauge LEDs.

2. Turvallisuustiedot

Always read and understand all safety warnings and instructions before using this battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

  • Älä upota akkua veteen tai muihin nesteisiin.
  • Älä store the battery in direct sunlight or in temperatures exceeding 50°C (122°F).
  • Älä oikosulje akun navat.
  • Älä hävitä paristot tuleen.
  • Pidä akku poissa lasten ulottuvilta.
  • Use only with RYOBI ONE+ compatible chargers.
  • Jos akku on tyhjäasing is cracked or damaged, Älä käytä sitä.
  • Kierrätä tai hävitä paristot paikallisten määräysten mukaisesti.

3. Asennus

Proper setup ensures optimal performance and longevity of your battery.

3.1 Ensimmäinen lataus

Fully charge the battery before its first use. Connect the battery to a compatible RYOBI ONE+ charger. The charger's indicator lights will display the charging status. Refer to your charger's manual for specific light patterns.

3.2 Akun asennus

To install the battery into a RYOBI ONE+ tool:

  1. Kohdista akku RYOBI ONE+ -työkalusi akkuliitäntään.
  2. Liu'uta akku tukevasti paikalleen, kunnes se napsahtaa, mikä osoittaa turvallisen kytkennän.
RYOBI ONE+ battery being inserted into a reciprocating saw

Kuva 3.1: Illustrates the correct method for inserting the battery into a compatible RYOBI ONE+ tool.

4. Käyttöohjeet

Once the battery is charged and installed, it is ready for operation.

4.1 Powering Tools

With the battery securely installed, your RYOBI ONE+ tool is ready for use. Refer to your specific tool's instruction manual for detailed operating procedures.

4.2 Akun varauksen ilmaisin

The battery features an on-board fuel gauge to indicate the remaining charge. Press the button on the battery to activate the LEDs. The number of illuminated LEDs corresponds to the approximate charge level:

  • 4 LEDiä: 75-100% lataus
  • 3 LEDiä: 50-75% lataus
  • 2 LEDiä: 25-50% lataus
  • 1 LEDiä: 0–25 % lataus (lataus pian)
RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery PBP002 with illuminated fuel gauge

Kuva 4.1: The battery's fuel gauge showing multiple illuminated LEDs, indicating a high charge level.

5. Huolto

Regular maintenance helps extend the life and performance of your battery.

5.1 Puhdistus

Keep the battery terminals clean and free of dust or debris. Use a dry, clean cloth to wipe the exterior of the battery. Älä use solvents or harsh chemicals.

5.2 Varastointi

For long-term storage, store the battery in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the battery with a partial charge (approximately 50%) to help prolong its overall lifespan. Avoid storing fully discharged batteries.

5.3 Latauskäytännöt

Recharge batteries promptly after use, especially if they are fully discharged. Avoid leaving batteries on the charger for extended periods after they are fully charged, as this can reduce battery life.

6. Vianmääritys

If you encounter issues with your battery, refer to the following common troubleshooting steps.

6.1 Akku ei lataudu

  • Ensure the charger is properly plugged into a working electrical outlet.
  • Verify that the battery is correctly seated in the charger.
  • Tarkista, ettei akussa tai laturissa ole näkyviä vaurioita. Jos ne ovat vaurioituneet, lopeta käyttö.
  • Allow the battery to cool down if it is hot from recent use; some chargers will not initiate charging until the battery reaches a safe temperature.

6.2 Työkalu ei käynnisty

  • Varmista, että akku on täyteen ladattu. Tarkista polttoainemittari.
  • Verify that the battery is securely installed in the tool until it clicks into place.
  • Check for any obstructions or issues with the tool itself. Refer to the tool's manual for specific troubleshooting.

7. Tekniset tiedot

MallinumeroPBP002
Voitage18 volttia
Akun kapasiteetti1.5 Ah
Akkukennon koostumusLitium-ioni
Tuotteen mitat (P x L x K)16.31 x 10.39 x 10.31 cm
Tuotteen paino311.84 g (11 unssia)
UudelleenkäytettävyysLadattava
Yhteensopivat työkalutRYOBI 18V ONE+ Tools

8. Takuu

This RYOBI ONE+ 18V Lithium-Ion 1.5 Ah Battery (PBP002) comes with a 30 päivän takuu from the date of purchase. Please retain your proof of purchase for all warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modifications, or normal wear and tear. For full warranty terms and conditions, please refer to the official RYOBI warranty documentation or websivusto.

9. Asiakastuki

For technical assistance, warranty claims, or product inquiries, please contact RYOBI Customer Support.

  • Valmistaja: RYOBI
  • Liikepaikka: One World Technologies Inc. PO Box 1288 Anderson SC 29622
  • For the most up-to-date contact information and support resources, please visit the official RYOBI websivusto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.