CREWORKS SX-DUCV106

CREWORKS Ultrasonic Cleaner

Model: SX-DUCV106

Käyttöopas

Johdanto

This manual provides instructions for the safe and efficient operation of your CREWORKS Ultrasonic Cleaner, Model SX-DUCV106. This device utilizes ultrasonic cavitation to thoroughly clean various items, including vinyl records, jewelry, glasses, and more. Please read this manual carefully before use and retain it for future reference.

Before and after cleaning a vinyl record with the CREWORKS Ultrasonic Cleaner, showing significant dirt removal.

Image: Before and After Cleaning Demonstration

Turvallisuusohjeet

VAROITUS: Näiden turvallisuusohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon tai vakavan vamman.

  • Only use with grounded electrical outlets.
  • Älä pura laitetta. Anna kaikki huoltotyöt pätevän henkilöstön tehtäväksi.
  • Do not operate the unit without water in the tank. Ensure the water level is between the MIN and MAX marks.
  • Do not use flammable, explosive, or corrosive cleaning solutions.
  • Vältä koskettamasta sähkökomponentteja märin käsin.
  • Pidä laite poissa lasten ja lemmikkien ulottuvilta.
  • Ensure proper ventilation during operation, as the unit can generate heat.
  • Irrota laite virtalähteestä ennen puhdistusta tai huoltoa.

Tuotteen komponentit

The CREWORKS Ultrasonic Cleaner package includes the following items:

  • Ultrasonic Cleaner Unit with Stainless Steel Tank
  • Kansi
  • Virtajohto
  • Cleaning Basket (for small items)
  • Vinyl Record Washing Rack (holds up to three 7" or 12" records)
  • Vinyl Record Drying Rack
  • Tyhjennysventtiili
All components of the CREWORKS Ultrasonic Cleaner laid out, including the main unit, lid, power cord, cleaning basket, record washing rack, and drying rack.

Image: Included Components

Asennus

  1. Place the ultrasonic cleaner on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
  2. Sulje tyhjennysventtiili tiiviisti.
  3. Fill the stainless steel tank with water. For enhanced cleaning, a small amount of appropriate cleaning solution can be added. Do not exceed the maximum fill line.
  4. Connect the power cord to the unit and then to a grounded electrical outlet.
The CREWORKS Ultrasonic Cleaner unit with its lid and control panel visible, ready for setup.

Image: Ultrasonic Cleaner Unit

Toiminta

General Cleaning Procedure

  1. After filling the tank (see Setup), place the items to be cleaned into the cleaning basket. Ensure items are fully submerged but not touching the bottom of the tank.
  2. Aseta puhdistuskori säiliöön.
  3. Set the desired cleaning time using the 'TIME +' and 'TIME -' buttons on the control panel. The timer can be set up to 30 minutes.
  4. Set the desired temperature using the 'TEMP +' and 'TEMP -' buttons. The heater can warm the solution up to 175°F (79°C). Heating can improve cleaning effectiveness for some items.
  5. Press the 'ON/OFF' button for the ultrasonic function to start cleaning. Press the 'ON/OFF' button for the heater function if heating is desired.
  6. Laite pysähtyy automaattisesti, kun asetettu aika on kulunut umpeen.
  7. Carefully remove the cleaning basket and rinse the cleaned items with clean water.

Vinyl Record Cleaning Procedure

  1. Assemble the vinyl record washing rack and place it over the tank.
  2. Carefully mount up to three 7-inch or 12-inch vinyl records onto the rack, ensuring the labels are protected from the cleaning solution.
  3. Lower the records into the tank, ensuring the grooves are submerged in the cleaning solution.
  4. Set the desired cleaning time and temperature as described in the General Cleaning Procedure.
  5. Start the ultrasonic cleaning and heating functions.
  6. Once cleaning is complete, carefully lift the records from the tank.
  7. Place the cleaned records onto the included drying rack to air dry completely before storage or playback.
The CREWORKS Ultrasonic Cleaner with vinyl records mounted on the washing rack, submerged in the cleaning tank.

Image: Vinyl Records in Cleaning Rack

A white plastic drying rack designed to hold multiple vinyl records upright for air drying.

Image: Record Drying Rack

Ohjauspaneeli ohiview

The digital control panel allows precise setting of cleaning parameters.

  • SET TEMP (°C) / ACTUAL TEMP (°C): Displays the set temperature and the current actual temperature of the solution.
  • LÄMPÖTILA + / LÄMPÖTILA -: Buttons to increase or decrease the target temperature.
  • ON/OFF (Heater): Aktivoi tai deaktivoi lämmitystoiminnon.
  • SET TIME (MINUTES SECONDS): Displays the set cleaning duration.
  • TIME + / TIME -: Buttons to increase or decrease the cleaning time.
  • ON/OFF (Ultrasonic): Aktivoi tai deaktivoi ultraäänipuhdistustoiminnon.
Close-up of the CREWORKS Ultrasonic Cleaner's digital control panel, showing buttons for temperature and timer settings, and warning labels.

Image: Digital Control Panel

Huolto

  1. Säiliön tyhjennys: After each use, especially if using cleaning solutions, drain the tank by opening the drain valve. Place a container underneath to collect the liquid.
  2. Säiliön puhdistus: Rinse the stainless steel tank with clean water. Wipe the interior and exterior surfaces with a soft, damp kangas. Älä käytä hankaavia puhdistusaineita tai teräsvillaa.
  3. Varastointi: Varmista, että laite on täysin kuiva ennen säilytystä. Säilytä viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja kosteudesta.
  4. Säännöllinen tarkastus: Periodically check the power cord for any damage. Ensure the drain valve operates smoothly.

Vianetsintä

OngelmaMahdollinen syyRatkaisu
Yksikkö ei käynnisty.No power supply; Power cord not connected; Faulty outlet.Check power cord connection; Test outlet with another device; Ensure unit is plugged into a grounded outlet.
Ultraäänitoiminto ei toimi.Ultrasonic function not activated; Insufficient water in tank.Press the ultrasonic 'ON/OFF' button; Ensure water level is above MIN mark.
Heater not working or overheating.Heater function not activated; Sensor malfunction; Prolonged operation.Press the heater 'ON/OFF' button; Allow unit to cool down; If overheating persists, discontinue use and contact support.
Huonot puhdistustulokset.Incorrect cleaning solution; Insufficient cleaning time/temperature; Items not properly submerged.Use appropriate cleaning solution for item type; Increase cleaning time or temperature; Ensure items are fully submerged.
Unit is excessively noisy.Normal operation sound; Items touching tank walls.Some operational noise is normal for ultrasonic cleaners. Ensure items are in the basket and not directly touching the tank. Consider operating in a well-ventilated area away from sensitive ears.

Tekniset tiedot

  • Malli: SX-DUCV106
  • Säiliön tilavuus: 1.6 litraa (6 litraa)
  • Ultraääniteho: 180W
  • Lämmitysteho: Jopa 200W
  • Ultraäänitaajuus: 40 kHz
  • Ajastimen asetukset: 0-30 minutes (Digital)
  • Lämpötila-asetukset: Up to 175°F (79°C) (Digital)
  • Säiliön materiaali: 304 ruostumatonta terästä
  • Tuotteen mitat: Noin 12.8 x 6.9 x 10.2 tuumaa
  • Tuotteen paino: Noin 10.5 kiloa
Diagram showing the dimensions of the CREWORKS Ultrasonic Cleaner unit and the record drying rack.

Kuva: Tuotteen mitat

Takuu ja tuki

CREWORKS products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please contact CREWORKS customer service. Please have your model number (SX-DUCV106) and purchase information ready when contacting support.

For the most up-to-date contact information, please visit the official CREWORKS websivustolta tai katso ostodokumentaatiostasi.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.