1. Johdanto
Thank you for choosing the Bosch AdvancedHedgeCut 70 electric hedge trimmer. This powerful and ergonomically designed tool is engineered for efficient and comfortable trimming of large hedges. Featuring Pro-Silence technology, it significantly reduces noise levels during operation. The 500 W Eco motor ensures high cutting performance, while the 70 cm blade length and 34 mm cutting capacity are ideal for dense foliage.
This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your hedge trimmer. Please read it thoroughly before first use and keep it for future reference.
2. Yleiset turvallisuusohjeet
VAROITUS: Lue kaikki tämän sähkötyökalun mukana toimitetut turvallisuusvaroitukset, ohjeet, kuvat ja tekniset tiedot. Kaikkien alla lueteltujen ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon ja/tai vakavan vamman.
- Käytä aina asianmukaisia henkilönsuojaimia, kuten suojalaseja, kuulonsuojaimia, käsineitä ja tukevia jalkineita.
- Pidä lapset ja sivulliset loitolla pensasleikkuria käyttäessäsi.
- Tarkista pensasleikkuri vaurioiden varalta ennen jokaista käyttökertaa. Älä käytä, jos se on vaurioitunut.
- Varmista, että virtajohto on hyvässä kunnossa ja sijoitettu niin, etteivät terät leikkaa sitä.
- Never operate the hedge trimmer in wet conditions or rain.
- Irrota virtalähde ennen puhdistusta, huoltoa tai kun jätät työkalun ilman valvontaa.
- Hold the hedge trimmer firmly with both hands during operation.
- Avoid cutting near electrical cables or other hidden objects.
- Älä kurota liikaa. Säilytä koko ajan oikea jalansija ja tasapaino.
- Säilytä pensasleikkuria kuivassa, turvallisessa paikassa lasten ulottumattomissa.
3. Tuote ohiview
The Bosch AdvancedHedgeCut 70 is designed for comfortable and efficient hedge trimming. Key components include:
- Terä: 70 cm laser-cut, diamond-ground blades for precise cutting.
- Terän suoja: Protective cover for the blade when not in use.
- Moniasentoinen kahva: Ergonomic handle for comfortable operation at various angles.
- Pro-Silence Motor: 500 W motor with reduced noise output.
- Käsisuoja: Transparent hand guard for clear visibility of the cutting area.
- Sähköjohto: Integrated power cable for mains connection.
Figure 3.1: A woman operating the Bosch AdvancedHedgeCut 70 hedge trimmer, demonstrating its ProSilence technology. A man is relaxing nearby, undisturbed by the low noise level.
Kuva 3.2: Lähikuva view of the precision-ground blades of the AdvancedHedgeCut 70, highlighting their sharpness and cutting efficiency.
Figure 3.3: Detail of the ergonomic multi-position handle on the AdvancedHedgeCut 70, designed for comfortable use at various angles.
4. Asennus
- Purkaminen: Carefully remove the hedge trimmer and all accessories from the packaging. Ensure all components listed in the "Components Included" section are present.
- Teränsuojuksen irrottaminen: Before use, remove the blade guard from the cutting blade. Always reattach the blade guard when the tool is not in use or during transport.
- Virtaliitäntä: Connect the hedge trimmer's power cable to a suitable outdoor extension cord. Ensure the extension cord is rated for outdoor use and is in good condition. Use a cable retainer if available on the extension cord to prevent accidental disconnection.
- Käyttöä edeltävä tarkistus: Before starting, visually inspect the blades for any damage or debris. Ensure all handles are securely fastened.
5. Käyttöohjeet
5.1 Käynnistys ja pysäytys
- To start the hedge trimmer, press and hold both safety switches (one on the front handle, one on the rear handle) simultaneously.
- To stop the hedge trimmer, release either safety switch. The blades will stop quickly.
5.2 Leikkaustekniikat
Parhaan tuloksen ja turvallisuuden saavuttamiseksi noudata näitä ohjeita:
- Holding the Tool: Always hold the hedge trimmer firmly with both hands. The multi-position handle allows for comfortable grip at various angles, reducing fatigue during extended use.
- Leikkausliike: Use a sweeping motion, moving the blades along the hedge. For horizontal cuts, tilt the blade slightly (5-10 degrees) towards the hedge to ensure a clean cut.
- Pystysuuntaiset leikkaukset: When trimming the sides of hedges, move the trimmer upwards, then downwards, ensuring a smooth, even finish.
- Thick Branches: The AdvancedHedgeCut 70 can cut branches up to 34 mm in diameter. For thicker branches, position the blade teeth around the branch and allow the tool to cut through without forcing.
Figure 5.1: The hedge trimmer blade effectively cutting through a thick branch, demonstrating its robust cutting capacity.
Figure 5.2: The hedge trimmer blade positioned close to a wall, illustrating its ability to trim edges precisely without damaging the surface.
6. Huolto
Säännöllinen huolto varmistaa pensasleikkurisi pitkän käyttöiän ja optimaalisen suorituskyvyn.
- Puhdistus: After each use, disconnect the power supply and clean the blades and housing. Use a stiff brush to remove sap and debris from the blades. Wipe the housing with a damp kangas. Älä käytä liuottimia tai hankaavia puhdistusaineita.
- Terän hoito: Periodically lubricate the blades with a light machine oil or blade lubricant to prevent rust and ensure smooth operation. If the blades become dull, they can be sharpened by a qualified service technician.
- Varastointi: Always attach the blade guard before storing. Store the hedge trimmer in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Virtajohto: Regularly inspect the power cord for any signs of damage. If the cord is damaged, it must be replaced by Bosch or an authorized service center to avoid a hazard.
7. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Pensasleikkuri ei käynnisty. | No power supply; safety switches not pressed simultaneously; damaged power cord. | Check power connection and extension cord. Ensure both safety switches are fully depressed. Inspect power cord for damage; replace if necessary. |
| Huono leikkausteho. | Tylsät terät; terät tukkeutuneet roskista; leikkaavat oksia liian paksuina. | Clean blades and lubricate. Have blades sharpened by a professional. Avoid cutting branches exceeding 34 mm. |
| Liiallinen tärinä. | Damaged blades; loose components. | Inspect blades for damage. Check for any loose screws or parts. If problem persists, contact customer support. |
8. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Mallinumero | 06008C0903 |
| Moottorin teho | 500 W |
| Terän pituus | 70 cm |
| Cutting Capacity (Max. Branch Diameter) | 34 mm |
| Tyhjäkäyntiisku | 3400 lyöntiä/min |
| Acoustic Power Level | 93 dB |
| Friction Clutch Torque | 60 Nm |
| Paino (ilman akkua) | 4.1 kg |
| Tuotteen mitat (P x L x K) | 50 x 60 x 10 cm |
| Virtalähde | Johdollinen sähkö |
| Terän materiaali | Alumiini |
| Mukana olevat komponentit | AdvancedHedgeCut 70, Blade Cover, Carton |
9. Takuu ja tuki
Bosch provides high-quality products and stands by their durability. This product comes with a commitment to spare parts availability for 5 vuotta.
For warranty claims, technical assistance, or to order spare parts, please contact your local Bosch service center or visit the official Bosch website. Ensure you have your model number (06008C0903) and proof of purchase available when contacting support.
Lisätietoja saat osoitteesta Bosch-myymälä Amazonissa.