AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Tuote ohiview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Tärkeimmät ominaisuudet:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedian käyttö: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Tekniset tiedot

3. Asennusopas

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Pakkauksesta purkaminen

1. Poista tietokoneen kotelo varovasti pakkauksestaan.
2. Poista kaikki suojakalvot tai sisäiset pakkausmateriaalit.
3. Aseta kotelo vakaalle ja tasaiselle alustalle.

3.2 Emolevyn asennus

1. Irrota karkaistusta lasista valmistettu sivupaneeli irrottamalla siipiruuvit.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Kiinnitä emolevy mukana toimitetuilla ruuveilla.

3.3 Virtalähteen asennus

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Kiinnitä virtalähde ruuveilla kotelon takaosasta.

3.4 Tallennusaseman asennus

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Laajennuskortin (GPU) asentaminen

1. Irrota tarvittavat laajennuspaikkojen suojat kotelon takaosasta.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Jäähdytysjärjestelmä

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Kaapelin hallinta

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4. Käyttöohjeet

4.1 Virran kytkeminen päälle/pois

• To power on your PC, press the Tehoa button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Tehoa painiketta muutaman sekunnin ajan.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• USB 3.0 -portti (x1): Nopeaa tiedonsiirtoa varten.
• USB 2.0 -portit (x2): Oheislaitteiden kytkemiseen.
• Mikrofoniliitäntä: Äänituloa varten.
• HD Audio Jack: For audio output (headphones/speakers).
• Reset-painike: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Huolto

Säännöllinen huolto auttaa varmistamaan tietokoneesi komponenttien optimaalisen suorituskyvyn ja pitkäikäisyyden.

5.1 Pölysuodattimen puhdistus

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Yleinen puhdistus

• Pyyhi kotelon ulkopinta pehmeällä,amp kangas. Vältä hankaavia puhdistusaineita.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Vianmääritys

Jos kohtaat ongelmia tietokoneen kotelon kanssa, harkitse seuraavia yleisiä vianmääritysohjeita:

• Ei virtaa: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Tuulettimet eivät pyöri / RGB ei toimi: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Ylikuumeneminen: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Etupaneelin portit eivät toimi: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Takuu ja tuki

7.1 Takuutiedot

The AeroCool HEXFORMBKV2 PC case comes with a 2 vuoden takuu for parts. Please retain your proof of purchase for warranty claims.

7.2 Tekninen tuki

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's websivustolla tai tuotteen pakkauksessa.

• AeroCool-virallinen Websivusto: www.aerocool.io
• Asiakastuen sähköposti: support@aerocool.io (Esimample, please verify on official websivusto)