Johdanto
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RICOO S7744 TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The RICOO S7744 TV Wall Mount, showcasing its articulating arm design.
Turvallisuustiedot
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- Use appropriate tools and follow all steps precisely. If unsure, consult a qualified installer.
- Älä ylitä 45 kg:n (99 paunan) enimmäispainokapasiteettia.
- Verify VESA compatibility (max 400x400 mm) with your TV before installation.
- Pidä lapset ja lemmikkieläimet loitolla asennuksen aikana.
Pakkauksen sisältö
Please check that all components are present and undamaged before installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
Paketti sisältää yleensä:
- Wall plate assembly with articulating arm
- TV bracket arms
- Mounting hardware kit (various screws, washers, spacers, and concrete anchors)
- Käyttöohje
Asennus ja asennus
Follow these steps carefully to install your TV wall mount. It is recommended to have two people for installation.
- Vaihe 1: Määritä asennuspaikka
Choose a suitable location on your wall. Ensure there are no hidden electrical wires or plumbing. The wall must be capable of supporting the weight of the mount and your TV. Use a stud finder if mounting to wood studs.
- Vaihe 2: Kiinnitä television kiinnikkeet televisioon
Carefully place your TV face down on a soft, clean surface. Attach the TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened to the VESA mounting holes on your TV.
Note: The mount supports VESA patterns from 200x200 mm up to 400x400 mm.
- Vaihe 3: Kiinnitä seinälevy seinään
Hold the wall plate assembly against the wall at your desired height. Use a level to ensure it is straight. Mark the drilling locations. Drill pilot holes. For concrete walls, insert the provided wall anchors. Secure the wall plate to the wall using the appropriate screws. Ensure it is level and firmly attached.
- Vaihe 4: Ripusta televisio seinälevyyn
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.
Operating the TV Wall Mount
The RICOO S7744 mount offers various adjustments for optimal viewing.
- Kääntyvä: The mount allows for a swivel range of +/-60 degrees. Gently push or pull the TV to adjust the viewkulma vaakasuoraan.
- Kallistaa: Säädä pystysuora viewing angle with a tilt range of +18 degrees (up) to -2 degrees (down). Loosen the tilt adjustment screws, set the desired angle, and re-tighten.
- Vaaitus: The front plate can be rotated +/-3 degrees for fine-tuning the TV's level after installation. Loosen the leveling screws, adjust, and re-tighten.
- Laajennus: The arm length can be extended from 86 mm to 388 mm from the wall. Gently pull the TV away from the wall or push it closer.
Image: Demonstrates the swivel, tilt, and extension capabilities of the mount, along with integrated cable management features for organizing cables.
Huolto
Säännöllinen huolto varmistaa TV-seinätelineesi pitkän käyttöiän ja turvallisen toiminnan.
- Puhdistus: Pyyhi teline pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.
- Säännölliset tarkastukset: Tarkista säännöllisesti kaikkien ruuvien ja pulttien kireys. Kiristä tarvittaessa uudelleen.
- Liike: If the mount's movement becomes stiff, apply a small amount of silicone-based lubricant to the moving joints.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Televisio ei ole vaakasuorassa | Wall plate not level, or front plate adjustment needed. | Adjust the +/-3 degree leveling feature on the front plate. If the wall plate is significantly off, re-install it ensuring it is level. |
| Mount feels loose or wobbly | Mounting screws are not tight enough, or wall anchors are insufficient. | Check and re-tighten all wall and TV mounting screws. Ensure appropriate anchors were used for your wall type and that they are securely installed. |
| Vaikeuksia säätää kääntöä/kallistusta | Adjustment screws are too tight, or joints require lubrication. | Loosen adjustment screws slightly. Apply silicone-based lubricant to moving joints if necessary. |
Tekniset tiedot
- Malli: S7744
- Näytön koon yhteensopivuus: 32–55 tuumaa (81–140 cm)
- Suurin kapasiteetti: 45 kg (99 lbs)
- VESA-yhteensopivuus: 200x200, 300x200, 300x300, 400x200, 400x400 mm
- Kääntöalue: +/- 60 astetta
- Kallistusalue: +18 degrees / -2 degrees
- Tasauksen säätö: +/- 3 astetta
- Wall Distance (Arm Length): 86 mm - 388 mm
- Materiaali: Steel (Note: Product specifications listed 'wood', but steel is the standard material for TV mounts of this type.)
- Väri: Musta
- Tuotteen mitat: 15.28 x 17.13 x 16.54 tuumaa
- Tuotteen paino: 9.48 kiloa
Image: Detailed technical drawing showing the dimensions and adjustable ranges of the RICOO S7744 TV Wall Mount in millimeters.
Takuu ja tuki
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official RICOO websivusto. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.
Valmistaja: ENZ Engineering GmbH