Pipishell PIXSF2
Pipishell Full Motion TV -seinäkiinnikkeen käyttöohje
Model: PIXSF2
Johdanto
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasing sen nivelvarsi ja VESA-levy.
Turvallisuustiedot
Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:
- Varmista, että kiinnityspinta kestää turvallisesti telineen ja television yhteispainon.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- Use all provided hardware and do not substitute parts.
- Jos olet epävarma jostakin asennusprosessin osasta, ota yhteyttä pätevään ammattilaiseen.
- Pidä lapset ja lemmikkieläimet loitolla asennuksen aikana.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
Pakkauksen sisältö
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| Komponentti | Määrä |
|---|---|
| Seinälevyn kokoonpano | 1 |
| TV Bracket | 1 |
| Mounting Hardware (screws, anchors, washers) | Valikoima |
| Käyttöohje | 1 |
Asennus ja asennus
Follow these steps carefully for a secure installation:
- Tarkista yhteensopivuus: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- Paikanna asennuskohta: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- Seinälevy: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- Kiinnitä TV-teline: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- Ripusta näyttö: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
Käyttöohjeet
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- Kääntyvä: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal viewkulma.
- Kallistaa: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect viewkulma.
- Jatko- ja paluuveto: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile Katso.
- Kierto: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
Huolto
To ensure the longevity and proper function of your TV wall mount:
- Tarkista säännöllisesti kaikki ruuvit ja liitokset varmistaaksesi, että ne ovat tiukasti kiinni.
- Puhdista teline pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.
- Älä ripusta telineeseen mitään muuta kuin sille tarkoitettu televisio.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Kiinnitys tuntuu epävakaalta asennuksen jälkeen. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| Vaikeuksia säätää kääntöä/kallistusta. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| TV ei ole vaakasuorassa. | Seinälevy asennettu epätasaisesti. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
Tekniset tiedot
- Malli: PIXSF2
- Merkki: Pipishell
- Materiaali: Seosteräs
- Väri: Musta
- Yhteensopivat TV-koot: 13-26 tuumaa
- Suurin kuormitettavuus: 33 lbs (15 kg)
- VESA-yhteensopivuus: 75x75mm, 100x100mm
- Liikkeen tyyppi: Swivel, Rotate, Tilt, Full Motion, Articulating
- Kallistuskulma: -15° - +5°
- Kääntökulma: ±90° (max, depends on TV size)
- Jatkos seinästä: 2.9 tuumaa (sisäänvedettynä) - 10.6 tuumaa (levitettynä)
- Tuotteen mitat: 38.98 x 12.6 x 5.12 tuumaa (pelkkä jalusta)
- Tuotteen paino: 1.39 kiloa
Takuu ja tuki
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell websivusto.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- Sähköposti: support@pipishell.com
- Websivusto: www.pipishell.com
You can also find additional resources and FAQs on our websivusto.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.