LEDVANCE Linear LED Shelf Light 400mm

1. Johdanto

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Lue tämä käyttöohje huolellisesti ennen asennusta ja säilytä se myöhempää tarvetta varten.

2. Turvallisuusohjeet

• Sähköturvallisuus: Asennuksen saa suorittaa pätevä sähköasentaja tai muu pätevä henkilö paikallisten sähkömääräysten mukaisesti. Irrota aina virta päävirtakytkimestä ennen asennusta, huoltoa tai korjausta.
• Käyttötarkoitus: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• IP44 luokitus: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Valon lähde: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Käsittely: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Puhdistus: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Liitäntätarvikkeet

4. Tekniset tiedot

Huomaa: Teknisiä tietoja voidaan muuttaa ilman erillistä ilmoitusta.

5. Asennus ja asennus

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Valmistele asennusalue: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Katkaise virta: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Merkitse porauspisteet: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Poraa reikiä: Poraa reiät merkittyihin kohtiin käyttämällä seinämateriaaliisi sopivaa poranterää. Aseta mukana toimitetut seinätulpat porattuihin reikiin.
5. Kiinnitä asennuskannattimet: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Sähköliitäntä: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Kiinnitä teline: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Palauta virta: Kun valaisin on asennettu ja kytketty tukevasti, kytke virta takaisin päävirtakatkaisimesta.

6. Käyttöohjeet

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Automaattinen toiminta: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Automaattinen sammutus: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Anturin sijoitus: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Huolto

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Puhdistus: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp Älä käytä voimakkaita kemikaaleja, hankaavia puhdistusaineita tai suihkeita suoraan valaisimen pinnalla.
• Tarkastus: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Valon lähde: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Vianmääritys

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Valo ei syty:
  • Tarkista, onko virtalähde kytketty ja onko sulake päällä.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Valo palaa jatkuvasti:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Varmista voltage supply is stable and within the specified range (240V).

Jos nämä toimenpiteet eivät ratkaise ongelmaa, ota yhteyttä asiakastukeen.

9. Takuu ja tuki

This LEDVANCE Linear LED Shelf Light comes with a 2 vuoden takuu ostopäivästä lukien ja kattaa materiaali- ja valmistusvirheet normaalin käytön aikana.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.