Wasserstein NestDB2VerMtBlkUSA

Wasserstein Vertical Adjustable Mount for Google Nest Doorbell (Battery)

Käyttöohje

Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your Wasserstein Vertical Adjustable Mount for the Google Nest Doorbell (Battery). Please read this manual thoroughly before installation and retain it for future reference.

Mitä laatikossa on

  • 1 x Wasserstein Vertical Adjustable Mount
  • 1 x Installation Toolkit (screws and anchors)
  • 1 x Käyttöohje
Takaisin view of the Wasserstein Vertical Adjustable Mount with mounting holes.

Kuva: Selkä view of the Wasserstein Vertical Adjustable Mount, showing its design and mounting points.

Asennus ja asennus

The Wasserstein Vertical Adjustable Mount is designed for hassle-free installation. Follow these steps to properly install your mount and Google Nest Doorbell (Battery).

  1. Valmistele asennuspinta: Ensure the surface where you intend to install the mount is clean and suitable for drilling.
  2. Kiinnitä pohjalevy: Use the provided screws and anchors to securely attach the mount's base plate to your desired location on the wall. If your doorbell is wired, feed the wires through the designated opening in the base plate.
  3. Säädä kulmaa: The vertical mount allows for adjustment from 0° to 10°. Position the adjustable part of the mount to achieve your desired vertical viewing angle. Secure the angle by tightening the small screw on the side of the mount.
  4. Mount the Google Nest Doorbell (Battery): Carefully attach your Google Nest Doorbell (Battery) onto the adjustable mount. Ensure it clicks securely into place.
Hands installing the Wasserstein Vertical Adjustable Mount on a wall.

Image: Hands attaching the Wasserstein Vertical Adjustable Mount to a wall, demonstrating the installation process.

Video: Official video demonstrating the installation and key features of the Wasserstein Vertical Adjustable Mount for Google Nest Doorbell (Battery).

Operation and Adjusting Viewkulmat

The primary function of this mount is to improve the viewing angle of your Google Nest Doorbell (Battery), especially when the doorbell is mounted at a suboptimal height or location. The adjustable design allows you to fine-tune the camera's vertical tilt.

  • Optimoitu View: Adjust the mount to direct your doorbell camera downwards, capturing visitors and packages that might otherwise be out of frame.
  • Up to 10° Vertical Adjustment: The mount provides up to 10 degrees of vertical tilt, allowing for precise positioning.
Side-by-side comparison of doorbell view without and with the mount.

Image: Side-by-side comparison showing the doorbell's field of view 'Without mount' and 'With mount', highlighting the expanded vertical coverage.

Google Nest Doorbell (Battery) installed on the Wasserstein Vertical Adjustable Mount.

Image: A Google Nest Doorbell (Battery) installed on the Wasserstein Vertical Adjustable Mount, demonstrating an improved viewkulma.

Huolto

The Wasserstein Vertical Adjustable Mount is constructed from rugged materials designed to withstand harsh weather conditions, ensuring long-lasting performance with minimal maintenance.

  • Puhdistus: Periodically wipe the mount with a damp liinalla pölyn tai lian poistamiseksi. Vältä voimakkaiden kemikaalien käyttöä, jotka voivat vahingoittaa materiaalia.
  • Tarkastus: Tarkista aika ajoin kiinnitysruuvit varmistaaksesi, että ne ovat tiukasti kiinni ja tukevasti.

Vianetsintä

If you encounter any issues with your Wasserstein Vertical Adjustable Mount, please refer to the following:

  • Mount is loose: Ensure all mounting screws are securely tightened. If the issue persists, re-install the mount using appropriate anchors for your wall type.
  • Kulman säätämisen vaikeus: Loosen the small adjustment screw slightly, reposition the mount to the desired angle, and then re-tighten the screw firmly.
  • Doorbell not fitting: Verify that your doorbell is a Google Nest Doorbell (Battery) model. Refer to the compatibility section in this manual.

For further assistance, please contact Wasserstein customer support.

Tekniset tiedot

Tuotteen nimiWasserstein Vertical Adjustable Mount
MallinumeroNestDB2VerMtBlkUSA
Yhteensopivat laitteetGoogle Nest -ovikello (akku)
Tuotteen mitat1.57 x 1.97 x 6.4 tuumaa
Tuotteen paino3.88 unssia
VäriMusta
AsennustyyppiSeinäteline
Säädettävyys0° to 10° Vertical Adjustment
Compatibility chart for Google Nest Doorbell models.

Image: Compatibility chart displaying a green checkmark for Google Nest Doorbell (Battery) and red crosses for other models.

Takuu ja tuki

This Wasserstein product is designed and manufactured to high-quality standards. It has passed the Made for Google certification, ensuring compatibility and reliability with Google Nest Devices.

  • Palautuskäytäntö: A 30-day refund/replacement policy is typically offered for this product. Please check with your retailer for specific return details.
  • Valmistaja: Wasserstein
  • Tukea: For product support, technical assistance, or warranty inquiries, please visit the official Wasserstein websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.