DALY Smart BMS 16S 48V 30A LifePO4 Protection Board User Manual

1. Johdanto

This manual provides essential information for the installation, operation, and maintenance of your DALY Smart BMS 16S 48V 30A LifePO4 PCB Protection Board. This Battery Management System (BMS) is designed to protect 16-cell, 48-volt Lithium Iron Phosphate (LifePO4) battery packs, ensuring their safety and extending their lifespan. It includes features such as overcurrent, overcharge, overdischarge, short circuit, and temperature protection, along with a wireless Bluetooth module for monitoring and parameter modification.

Kuva 1: Etuosa view of the DALY Smart BMS 16S 48V 30A LifePO4 Protection Board.

2. Tärkeimmät ominaisuudet

• Kattava suojaus: Sisältää ylivirta-, ylilataus-, ylipurkaus-, oikosulku- ja lämpötilasuojauksen akun suojaamiseksi.
• Älykäs valvonta: Wireless Bluetooth module allows real-time monitoring of battery status and modification of parameters via a smartphone application or PC software.
• Vankka muotoilu: Kaksinkertainen suojaus ruiskutuspatenttitekniikan ja patentoidun kuoren ansiosta, mikä tarjoaa vedenpitävät, pölynkestävät, iskunkestävät ja antistaattiset ominaisuudet.
• Suuri tarkkuus: Utilizes high-quality components for precise acquisition of battery data.
• Helppo asennus: Designed for straightforward integration into your battery system.

Figure 2: DALY Smart BMS connected to a smartphone application for real-time data display.

3. Pakkauksen sisältö

Pura pakkausta pakkauksesta ja varmista, että kaikki alla luetellut osat ovat mukana:

• 3.2V LifePO4 BMS (1 unit)
• Bluetooth-moduuli (1 yksikkö)
• NTC-anturi (1 yksikkö)
• Sampling-kaapeli (1 yksikkö)
• UART-kaapeli (1 yksikkö)
• Käyttöohje (1 yksikkö)

4. Asennus ja asennus

Proper installation is crucial for the safe and effective operation of the BMS. Please follow these steps carefully.

4.1 Tarvittavat työkalut

• Soldering machine (suggested temperature: 662°F / 350°C)
• Sakset
• Kaksipuolinen teippi
• Tinalanka
• Yleismittari

4.2 Kytkentäohjeet

Note: Always disconnect balance wires and the BMS connection port before welding black and red balance wires on the battery pack. Ensure the BMS cooling surface remains uncovered.

1. After assembling your LifePO4 battery pack, mark battery B-, B1, B2,..., until the last red wire reaches battery pack B+.
2. Connect balance wires to the BMS connection port. Use a multimeter in ohm detection function and turn on the buzzer. Connect the multimeter's black test pen to BMS P- and the red test pen to BMS B-. A beep sound indicates the BMS circuit connection is correct.
3. Käytä tasavirta-äänenvoimakkuuttatage function multimeter to measure the battery pack's voltage (between Battery B- and Battery B+) and through the BMS output voltage (between BMS B- and Battery P+). If these voltages are the same, the BMS can work normally.

Figure 3: Detailed wiring diagram for connecting the DALY Smart BMS to a 16S LifePO4 battery pack.

Figure 4: Physical dimensions of the DALY Smart BMS 16S 48V 30A.

5. Käyttö

The DALY Smart BMS offers advanced monitoring and control capabilities through its integrated Bluetooth module and compatible software.

5.1 Bluetooth App / PC Software

Utilize the dedicated Bluetooth application (for smartphones) or PC software to:

• Monitor real-time battery parameters such as voltage, current, temperature, and State of Charge (SOC).
• View fault alarms and protection status.
• Modify various BMS parameters to optimize performance for specific applications.

Kuva 5: Esimample of DALY Smart BMS integration with a battery system and remote monitoring via a smartphone application.

6. Tekniset tiedot

6.1 Yleiset tiedot

6.2 Electrical Parameters (LifePO4 16S Smart BMS)

Figure 6: Detailed electrical parameters for DALY Smart BMS LifePO4 16S models.

Refer to Figure 6 for detailed electrical parameters including discharge current, charge current, overcharge protection, overdischarge protection, balance voltage, short circuit protection, and temperature protection ranges. Note that the 30A model's specific values are listed within the table.

7. Vianmääritys

Tässä osiossa käsitellään yleisiä ongelmia, joita saatat kohdata DALY Smart BMS -järjestelmän kanssa.

7.1 BMS Shutting Off

If the BMS frequently disconnects the battery from the bus or shuts off unexpectedly, consider the following:

• Johdotusten tarkistus: Re-verify all wiring connections, especially the balance leads and main power connections, for secure and correct placement. Loose connections can cause intermittent operation.
• Parametriasetukset: Ensure that the protection parameters (e.g., overcurrent, undervoltage) configured in the Bluetooth app or PC software are appropriate for your battery pack and load. Incorrect settings can trigger premature protection.
• Kuormavirta: Confirm that the continuous discharge current of your application does not exceed the BMS's rated 30A capacity. Sustained overcurrent will activate protection.
• Lämpötila: Check the operating temperature of the BMS. Excessive heat can trigger thermal protection. Ensure adequate ventilation around the BMS.
• Cell Imbalance: Merkittävä tilavuustage differences between individual cells can cause the BMS to trigger balance or protection functions. Monitor cell voltages via the app.

If the issue persists after checking these points, contact customer support for further assistance.

8. Huolto

To ensure the longevity and optimal performance of your DALY Smart BMS:

• Säännöllinen tarkastus: Periodically inspect all wiring and connections for signs of wear, corrosion, or looseness.
• Puhtaus: Keep the BMS free from dust and debris. While the unit is dustproof, a clean environment helps maintain optimal thermal performance.
• Ohjelmistopäivitykset: Check for any available firmware or software updates for the Bluetooth app or PC software to ensure you have the latest features and bug fixes.
• Ympäristöolosuhteet: Käytä rakennusautomaatiojärjestelmää sen määritellyissä lämpötila- ja kosteusrajoissa vaurioiden välttämiseksi.

Kuva 7: Räjähtänyt view illustrating the internal structure and components of the DALY BMS, highlighting its robust design.

9. Sovellukset

The DALY Smart BMS is suitable for a wide range of applications requiring reliable battery management for 16S 48V LifePO4 battery packs.

Kuva 8: Esimamples of diverse applications for DALY BMS products.

10. Takuu ja tuki

DALY provides comprehensive customer support for its products.

• Asiakaspalvelu: 24-hour one-on-one customer service is available for inquiries and assistance.
• Tekninen tuki: Lifetime technical support is offered for all DALY BMS products.
• Lisävarusteet: If you require additional accessories such as an active balancer or parallel module, please contact customer service.