Qingping Digitaalinen Bluetooth-lämpömittari Kosteusmittari Käyttöohje

1. Tuote ohiview

The Qingping Digital Bluetooth Thermometer Hygrometer is designed to provide accurate, real-time temperature and humidity readings for indoor environments. Featuring an E Ink display for clear visibility from various angles, this compact device offers multiple mounting options and long battery life. It can connect to the Qingping+ app for remote data access and historical data tracking.

Figure 1: Qingping Thermometer Hygrometer and its companion app interface.

2. Asennus

2.1. Akun asennus

The device uses one CR2430 Lithium Metal button cell battery, which is included. To install or replace the battery:

1. Paikanna laitteen takaosassa oleva paristolokeron kansi.
2. Twist the cover counter-clockwise to open it.
3. Aseta CR2430-paristo paikalleen positiivinen (+) puoli ylöspäin.
4. Aseta kansi takaisin ja kiinnitä se kiertämällä myötäpäivään.

Figure 2: Battery compartment showing the CR2430 battery.

2.2. Asennusvaihtoehdot

The Qingping Thermometer Hygrometer offers versatile placement options:

• Työpöydän sijoittelu: Open the back cover to an angle of 90 degrees to the body. This allows the device to stand upright on a flat surface.
• Seinäasennus: Use the supplied wall sticker. Attach the sticker to a clean, dry wall surface, then attach the monitor to the sticker. The monitor has built-in magnets, and the wall sticker contains an iron plate for secure attachment.
• Magneettinen kiinnitys: The device has built-in magnets, allowing it to be directly attached to iron surfaces, such as a refrigerator door.

Figure 3: Desktop and Wall mounting configurations.

3. Käyttöohjeet

3.1. E Ink Display

The E Ink display provides clear, paper-like readings of temperature and humidity. It offers ultra-wide viewing angles and high contrast for easy readability from various positions in a room.

Figure 4: Features of the E Ink display.

3.2. Lämpötilayksiköiden vaihtaminen

To switch between Fahrenheit (°F) and Celsius (°C), press the button located on the back of the product.

3.3. App Connection and Remote Monitoring (Qingping+ App)

To access temperature and humidity data remotely, download the Qingping+ app from the Google Play Store or Apple App Store. A Qingping Bluetooth Gateway (sold separately) is required for remote access functionality.

Figure 5: Remote monitoring via the Qingping+ app.

3.4. Historical Data Recording

The device tracks and saves data for up to 30 days. This historical data can be viewed as graphical statistics within the Qingping+ app and can also be exported in CSV format if needed.

Kuva 6: Historiatiedot viewable in the Qingping+ app.

4. Huolto

4.1. Pariston käyttöikä ja vaihto

The device features low power consumption, providing approximately 10 months of battery life in normal indoor environments. When the battery is low, a battery icon will appear on the display. Refer to Section 2.1 for battery replacement instructions.

4.2. Hoito ja puhdistus

To ensure accurate readings and prolong the device's lifespan:

• Pyyhi laite pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita äläkä upota laitetta veteen.
• Avoid placing the product in environments with humidity consistently higher than 90% for long-term use, as this may affect performance.
• Älä tuki tuotteen pohjassa olevaa tuuletusaukkoa.

5. Vianmääritys

• Epätarkkoja lukemia:
  • Ensure the device is placed in a stable environment, away from direct sunlight, drafts, or heat sources.
  • Allow approximately 15 minutes for the readings to stabilize after initial setup or significant environmental changes.
  • Verify the vent hole on the bottom of the product is not blocked.
• Display Issues (e.g., "188" displayed):
  • This indicates a factory reset or an error. Press and hold the button on the back of the product until the screen displays "188", then release. Wait for the product to return to correct temperature and humidity readings.
• No Data in App / Connection Issues:
  • Varmista, että Bluetooth on käytössä älypuhelimesi Bluetooth-toiminnolla ja että laite on kantaman sisällä.
  • For remote access, confirm that a Qingping Bluetooth Gateway is properly set up and connected.
  • Check the battery level of the device.
  • Restart the Qingping+ app and/or your smartphone.

6. Tekniset tiedot

Figure 7: High accuracy sensor from Sensirion.

7. Takuu ja tuki

For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Qingping websivusto. Säilytä ostokuitti takuuvaatimuksia varten.

For further assistance, you may also contact Qingping customer service through their official channels.