Johdanto
The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.
Tärkeitä turvallisuusohjeita
Lue ja noudata kaikkia ohjeita huolellisesti ennen UPS-laitteen asentamista, käyttöä tai huoltoa. Säilytä tämä käyttöohje myöhempää tarvetta varten.
- Tämä UPS sisältää vaarallisia aineitatagÄlä yritä purkaa laitetta. Huoltotyöt saa suorittaa vain pätevä henkilöstö.
- UPS-laite on liitettävä maadoitettuun pistorasiaan.
- Älä tuki tuuletusaukkoja. Varmista riittävä ilmankierto UPS-laitteen ympärillä.
- Älä asenna UPS-laitetta suoraan auringonvaloon, lämmönlähteiden lähelle tai ympäristöihin, joissa on paljon pölyä, kosteutta tai syövyttäviä aineita.
- The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
- In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.
Pakkauksen sisältö
Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer.
- PowerWalker VFI 3000 AT UPS Unit
- Käyttöopas (tämä asiakirja)
- USB-tiedonsiirtokaapeli
- Virransyöttökaapeli
- Ohjelmisto-CD (jos sovellettavissa)
Tuote loppuview
Etupaneeli
Kuva 1: Edessä view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.
Kuva 2: Yksityiskohtainen view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.
The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.
Takapaneeli
Kuva 3: Takaosa view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).
The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.
Asennusohjeet
1. sijoitus
- Aseta UPS tasaiselle ja vakaalle alustalle.
- Ensure the environment is well-ventilated and free from excessive dust or moisture.
- Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
- Avoid placing the UPS near heat-emitting appliances.
2. Yhdistetään virtalähteeseen
- Connect the provided power input cable to the UPS input receptacle on the rear panel.
- Plug the other end of the power input cable into a grounded wall outlet.
- Anna UPS-laitteen latautua vähintään 8 tuntia ennen ensimmäistä käyttökertaa optimaalisen akun suorituskyvyn varmistamiseksi.
3. Laitteiden liittäminen
- Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
- Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
- For devices requiring terminal output, connect them according to electrical safety standards.
4. Ensimmäinen käynnistys
- After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
- The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
- The UPS is now providing protected power to the connected devices.
UPS:n käyttö
Kytkeminen päälle/pois
- Käynnistää: Paina ja pidä painettuna ON painiketta 2 sekunnin ajan.
- Sammuttaa: Paina ja pidä painettuna POIS button for 2 seconds. The UPS will shut down, and power to connected devices will cease.
LCD-näytön ymmärtäminen
The LCD display provides critical information about the UPS status. Use the ENTER ja ESC buttons to navigate through different display screens, which may include:
- Tulo Voltage ja taajuus
- Lähtö Voltage ja taajuus
- Akun lataustaso
- Latausprosenttitage
- Operating Mode (Online, Battery, Bypass)
- Virhekoodit (jos sellaisia on)
Akun varmuuskopiointi
Virran ollessa kyseessätage tai merkittävä tilavuustage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.
Viestintäohjelmisto
For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.
Huolto
Akun hoito
- Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
- Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
- Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.
Puhdistus
- Irrota UPS verkkovirrasta ja kaikista kytketyistä laitteista ennen puhdistamista.
- Pyyhi UPS-laitteen ulkopinta pehmeällä, kuivalla liinalla.
- Älä käytä nestemäisiä tai aerosolipohjaisia puhdistusaineita, sillä ne voivat vahingoittaa laitetta.
- Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.
Varastointi
- If storing the UPS for an extended period, ensure the batteries are fully charged.
- Store the UPS in a cool, dry place.
- Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.
Vianetsintä
Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| UPS ei käynnisty. | Ei verkkovirtaa. Alhainen akun varaus. | Tarkista virtajohdon liitäntä ja pistorasia. Allow UPS to charge for several hours. |
| UPS beeps continuously in normal mode. | Ylikuormitustila. Sisäinen vika. | Reduce the load by unplugging non-essential devices. Ota yhteyttä tekniseen tukeen. |
| Lyhyt varmuuskopiointiaika. | Akkuja ei ole ladattu täyteen. Batteries reaching end of life. Liiallinen kuormitus. | Allow UPS to charge for 8+ hours. Contact service for battery replacement. Vähennä kytkettyä kuormitusta. |
| UPS is noisy. | Normal fan operation (especially under load). Tuulettimen tukos. | This is normal for online UPS units. Ensure proper ventilation. Check for and clear any obstructions around fans. |
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Malli | 10122182 |
| Kapasiteetti | 3000 VA / 2700 W |
| Tulo Voltage | 300 Volts (nominal) |
| Lähtö Voltage | 300 Volts (nominal) |
| Akun tyyppi | Lyijyhappoakut, AGM |
| Mukana paristot | Kyllä |
| Lähtöliitännät | 4x Type F Earthing Contact, Terminal Output |
| Muototekijä | Torni |
| Mitat (P x L x K) | 41.6 x 19.6 x 34.2 cm |
| Paino | 21 kg |
| Materiaali | Muovi |
| Ampkorotus | 9 Amps |
Takuu ja tuki
The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker websivusto.
For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.