Onforu 100W Dusk to Dawn Outdoor LED Flood Light Instruction Manual

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W Dusk to Dawn Outdoor LED Flood Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This flood light is designed for outdoor use, featuring a photocell sensor for automatic operation and adjustable heads for broad illumination.

Image 1.1: Onforu 100W Dusk to Dawn Outdoor LED Flood Light installed on a house, providing bright illumination.

2. Turvallisuustiedot

VAROITUS: Sähköiskun vaara. Irrota virta sulakkeesta tai johdonsuojakatkaisimesta ennen asennusta tai huoltoa.

• Varmista, että virta on katkaistu ennen asennusta tai huoltoa.
• Asennuksen saa suorittaa pätevä sähköasentaja paikallisten sähkömääräysten mukaisesti.
• Älä asenna pinnoille, jotka eivät ole rakenteellisesti kestäviä.
• Älä katso suoraan LED-valonlähteeseen, kun se palaa.
• Pidä syttyvät materiaalit poissa valaisimesta.
• This product is not intended for use with motion sensors.
• This product is not solar powered.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• 1 x Onforu 100W Dusk to Dawn Outdoor LED Flood Light
• 1 x kiinnike
• 1 x kumitiiviste
• 1 x Black Cap for Photocell (for switch-controlled mode)
• Kiinnitysruuvit ja mutterit
• Käyttöohje

Image 3.1: The flood light fixture and included installation hardware.

4. Tuotteen ominaisuudet

• Korkea valoteho: 100W LED flood light producing up to 9000 lumens with 154 LEDs.
• Säädettävät päät: Kolme lamp heads can be adjusted independently to customize lighting angles and provide a wide light range (up to 120° beam angle).
• Hämärästä aamunkoittoon -sensori: Integrated photocell sensor automatically turns the light on at night (10-20 Lux) and off during the day (30-60 Lux).
• Switch-Controlled Mode: Option to cover the photocell sensor with the included black cap to enable manual control via a wall switch.
• IP65 vedenpitävä: Ensures reliable operation in various weather conditions, including rain, sleet, and snow.
• Tehokas jäähdytys: Constructed with high-quality aluminum housing and a fin-type heat sink design for effective heat dissipation, prolonging LED lifespan.
• Energiansäästö: Advanced high-efficiency LEDs reduce electricity consumption by over 80%.

Image 4.1: The three adjustable lamp heads and the light perception sensor.

Image 4.2: The light demonstrating its IP65 waterproof capability during rainfall.

5. Asennus ja asennus

This product requires hardwired installation. Ensure power is disconnected before proceeding.

1. Valmistele johdotus: Ensure the electrical box is properly installed and the power is off at the circuit breaker.
2. Kiinnike: Attach the mounting bracket to the electrical box using the provided screws. Ensure the rubber gasket is placed between the bracket and the mounting surface for a watertight seal.
3. Johdotusliitännät: Connect the light fixture's wires to your household wiring:
   • Black wire (Live) to the Live wire.
   • White wire (Neutral) to the Neutral wire.
   • Green wire (Ground) to the Ground wire.
   Kiinnitä liitännät lankamuttereilla.
4. Kiinnitä teline: Align the light fixture with the mounting bracket and secure it with the central screw. Ensure the fixture is flush against the mounting surface.
5. Säädä päät: Loosen the screws on the adjustable heads to position them to your desired lighting angles. Tighten the screws to secure the heads.
6. Palauta virta: Kytke virta katkaisijasta.

Image 5.1: Wiring diagram for installation.

Kuva 5.2: Visuaalinen opas asennusprosessiin.

6. Käyttöohjeet

The Onforu 100W Dusk to Dawn Outdoor LED Flood Light offers two operating modes:

6.1. Hämärästä aamunkoittoon -tila (oletus)

In this mode, the integrated photocell sensor detects ambient light levels. The light will automatically turn on when the ambient light drops to 10-20 Lux (at dusk) and turn off when the ambient light increases to 30-60 Lux (at dawn).

Image 6.1: The light operating in automatic dusk to dawn mode.

6.2. Kytkinohjattu tila

To operate the light manually via a wall switch, cover the photocell sensor with the provided black cap. This will prevent the sensor from detecting ambient light, allowing the light to be controlled solely by the external switch.

Image 6.2: Using the black cap to enable switch-controlled mode.

7. Huolto

• Puhdistus: Periodically clean the light fixture and photocell sensor with a soft, damp liinalla optimaalisen suorituskyvyn varmistamiseksi. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Tarkastus: Tarkista johdotus ja kiinnitys säännöllisesti mahdollisten vaurioiden tai löystymisen varalta.
• LEDin vaihto: The LEDs are integrated and not user-replaceable.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

This product is sold with no stated warranty. For any questions or technical assistance, please refer to the retailer's customer service or the manufacturer's official websivusto tukivaihtoehdoille.